PDA

View Full Version : [Tutorial] Manipulating Map Banks

Spherical Ice
December 10th, 2012, 1:20 PM
Manipulating Map Banks
Backup your ROM before making changes!

HxD or another Hex Editor (this tutorial will reference HxD keystrokes and shortcuts)
Windows Calculator: Programmer Mode (Programmer Mode can be accessed doing the keystroke Alt + 3)
FSF (or the ability to find free space in a Hex Editor - it really isn't that hard)
A FireRed BPRE ROM

Repointing Map Banks
The offset that control map banks is located at 0x05524C.
In HxD, do the shortcut Ctrl+ G and enter 5524C.
http://i.imgur.com/AIs63.png
At that offset, you can see the data:
A8 26 35 08
This is a pointer. To find out where this pointer...points to, we need to do the following:A8 26 35 08

Reverse order of bytes:
08 35 26 A8

Remove 08:
35 26 A8This points to 0x3526A8.
In HxD, do the shortcut Ctrl + G and enter 3526A8.
http://i.imgur.com/tYQbU.png
The data here lists pointers that point to each map bank.
In HxD, do the shortcut Ctrl + E. In the Length: field, select hex and enter AC.
http://i.imgur.com/RRxN4.png
Do the shortcut Ctrl + C to copy the selected block of data to your clipboard.
http://i.imgur.com/cngRv.png
Open Notepad and do the shortcut Ctrl + V to paste the block of data.

Using FSF (or just manually in HxD), find an offset that has room for 0xAC (or dec 127). I'm going to use the offset 0x800000. Take note of the offset in Notepad, and turn it into a pointer (the opposite of what we did before):80 00 00

Reverse the bytes:
00 00 80

00 00 80 08In HxD, go back to the offset 0x05524C (Ctrl + G and enter 5524C).
Replace the data A8 26 35 08 with your pointer to the new, repointed table of the map banks: 00 00 80 08
http://i.imgur.com/lV0jx.png
Now go to your new pointer, so in my case 0x800000, using Ctrl + G, and then go back into Notepad.
Select the data you pasted earlier (04 20 35 08 18 20 35 08...) and in HxD do the shortcut Ctrl + B to overwrite the FF free space.
http://i.imgur.com/UJEKI.png
Congratulations, you've now repointed your Map Bank table. When you load your ROM in Advance Map, you will get an error message, but it won't affect anything. I think editing the INI files will fix this error message but I can't find the data you need to change.
http://i.imgur.com/3hchq.png

Adding, removing and changing maps in BanksEach pointer (XX XX XX 08) in this table points to another table which has pointers for each map.

The first pointer, which corresponds to the first map bank, Bank 0, 04 20 35 08, when rearranged, points to 0x352004. At 0x352004, the five pointers point to the five maps in Bank 0.

With this knowledge, we can add, remove, or change the maps in each bank by changing the offsets that each Bank points to. To make this easier, we should repoint each bank. For this tutorial, I'm just going to repoint Bank 0.

First, we're going to need to copy the data at 0x352004. Since there are five maps in Bank 0, there are also five pointers, and each pointer is four bytes long, we're going to need to select 0x14 (dec 20) bytes of data - that's five multiplied by four (if you don't know that 5 * 4 = 20 already, smh).
http://i.imgur.com/gs5lw.png
To select the data, do the shortcut Ctrl + E at 0x352004, and in the Length: field, enter 14, making sure that hex is selected. Copy and paste the selected data in Notepad.

Using FSF, or manually, find an offset with at least 20 bytes of space free (more if you want to add more maps to a bank). I'm going to use the offset 0x8000B0. Copy the data you just pasted into Notepad, and then do the shortcut Ctrl + B at your new offset to replace the FF free space with the data for the maps in Bank 0.
http://i.imgur.com/G3209.png
Convert the offset where the maps at Bank 0 are located by doing the process we did before:

80 00 B0

Reverse the bytes:
B0 00 80

B0 00 80 08

Go back to your new bank table, which is 0x800000 for me, and replace the pointer to the maps in Bank 0, or whatever bank you're editing, with your new pointer.
http://i.imgur.com/bEt3i.png
You've now repointed Bank 0, meaning you can now just add, remove, or change the pointers to whichever map you'd like.

It's pretty straightforward, but in case you're not sure, here's an example.
(The following could probably apply to Banks instead of Maps, but I'm not sure)

Say I want to remove the map 0.1 from Bank 0 (this won't remove it from the game, the data is still there, it's just inaccessible). That's this map:
http://i.imgur.com/al7I2.png
Well, that map is the second map along, so it will be the second offset.A4 F1 34 08In order to remove this map, I need to shift the offsets after it over and replace this offset, like so:
http://i.imgur.com/3R3sT.png
http://i.imgur.com/kPiui.png

Of course, by doing this, we're going to have a duplicate of the last map, but we can just overwrite that offset with free space (FF FF FF FF).
http://i.imgur.com/nhCyA.png
http://i.imgur.com/pBSYA.png

Similarly, you can add maps to Banks by adding their offset to the end of the table. For example, this time I'm going to add Pallet Town (3.0) to Bank 0. Pallet Town's offset is 18 06 35 08, so by adding that to the end of the table, the last map in Bank 0 will now be Pallet Town.
http://i.imgur.com/ScpzV.png
http://i.imgur.com/we6a6.png
Note that Pallet Town will still be in Bank 3, so you'll have to remove it from there to save space.

I hope this tutorial will be helpful, it's a good way to keep things organised for we OCD folk (for example, if your starting town has more than four interior maps, you can expand Bank 4 and not overflow into Bank 5 and making things all confusing).
http://i.imgur.com/3hchq.png
I haven't found any adverse side effects except for the error message upon loading, but that isn't too much of a problem. Sometimes, however, Advance Map won't let you collapse the From header folder, so to fix that, load a working ROM, open the folder, and then load your ROM. This isn't ideal, so if anyone has a solution for that, I'm all ears :3 (I'm almost 100% sure it involves editing the INI files)

Spherical Ice
December 11th, 2012, 6:47 AM
Oh, it appears that Advance Map 1.9.2 doesn't give the error message and loads the ROM first time, so it's only 1.9.5 that will give you the glitch. The more you know~

A Sunny Moo
June 11th, 2013, 11:00 AM
After they took the map removal out of Advance Map, it became very difficult for me to be able to use the default maps and resize them without ending up with pointers that led to nowhere. This tutorial is very helpful. Thank you very much.

Awkward.
June 17th, 2013, 2:33 PM
Okay, so, hypothetically, if I wanted to, if I repointed both bank 0 and bank 3, I could replace the data in bank 0 with the data in bank 3?

reeveelution
July 9th, 2013, 11:08 PM
ok, so how would one go about completely removeing all of the maps and banks from a rom, so i could start fresh and insert the maps into banks as i get them made?

Spherical Ice
January 9th, 2014, 11:14 PM
Okay, so, hypothetically, if I wanted to, if I repointed both bank 0 and bank 3, I could replace the data in bank 0 with the data in bank 3?Yes, though it would involve a lot of shuffling data.
ok, so how would one go about completely removeing all of the maps and banks from a rom, so i could start fresh and insert the maps into banks as i get them made?I believe there are many patches made that do so.

Anyway, I'm just posting to say that A-Map 1.9.5 doesn't glitch up if you keep the pointers to the map banks at 0x3526A8.