[Graphics] Tile Inserting, The Easy Way!

[Colez]

I got the tile inserted, but it's huge! and I can't place it anywhere.. so what do I do?

[Banjora Marxvile]

What do you mean you can't place it anywhere? If you mean you can't place it for use in Advance Map, go to "Blocks" - "Change amount" to change the amount of tiles you can use in Advance Map.

But be specific if you have any questions.

[Colez]

Sorry ; I meant I couldn't fit the tile onto the rom so I could place it onto the map. It also seems that I already have the btyes set to where I'm using the max amount.

[ruup20]

My game gets glitched if i do this

[shiny quagsire]

Originally Posted by ruup20

My game gets glitched if i do this

What do you mean? If it glitches, you obviously didn't follow the tutorial word by word.

[BLAZEQUAZA]

I was using this tutorial, but when I clicked on my new tileset to load, this message appeared on my screen:



What did I do wrong?

~BLAZE

[hackerofdarkness]

Originally Posted by BLAZEQUAZA

I was using this tutorial, but when I clicked on my new tileset to load, this message appeared on my screen:



What did I do wrong?

~BLAZE

My guess is that you forgot to export the tileset first or you moved where the pal file is

[Miggs]

Sorry but the image as to be 128x192.

How do i solve this?

[UnForgiven*]

I already knew that Eraser thing ... but thank you.... :D

You need to do it again .....

Save the tileset x (1 or 2)

You must have the Tilestet0 and the tileset0.pal

and edit it in paint...

and load it again just like the Tutorial

but make sure you have the tileset.pal

Hope it Helps :D

You need to do it again .....

Save the tileset x (1 or 2)

You must have the Tilestet0 and the tileset0.pal

and edit it in paint...

and load it again just like the Tutorial

but make sure you have the tileset.pal

Hope it Helps :D

[theusmellthis]

do you know how to make a hole tileset

[PaulGR]

I am not so good at graphic....
well i use photoshop to extrac pallete and then laod it with A-Map.
Is this a right way?

[EdensElite]

So this 'inserts' the tile into the memory, but then how do you use the tile?

[M.L]

awsome tut i started off witht this method and found using infranview and character maker pro is better as it indexes and character maker pro then saves the pallete so you dont make pallete errors

[pikachu27]

Originally Posted by Aljam

Introduction

I'm going to show you how to tile insert using a method that I've adopted by using some of paint's less known features.

What You'll Need

• Advanced Map (A-Map)
• Paint
• A positive attitude

Instructions

1. Open A-Map
   
   Spoiler:

   
2. Open the map with the tileset you want to destr-- err... I mean change
   
   Spoiler:

   
3. Click on the puzzle piece
   
4. Go to the palette that most resembles your tile's colour or to the palette with the colours you want to change it to
   
   Spoiler:

   
5. Now go Picture>Save Tileset 2 (or 1 if you're editing the default tileset)
   
   Spoiler:

   
6. Open your tileset and tile with paint
   
   Spoiler:

   
7. Paste your tile into the tileset
   
   Spoiler:

   
8. Click on the eyedropper
   
   Spoiler:

   
9. Left click on your tile's colour
   
   Spoiler:

   
10. Click on the eyedropper again
    
11. Right click on the colour that resembles the tile most or the colour you want to change it to
    
    Spoiler:

    
12. Click on the eraser
    
    Spoiler:

    
13. Hold control and press + - to resize your eraser to the size of the tile (or the size you want but resizing the eraser to the size of the tile is faster)
    
    Spoiler:

    
14. Hold the right button and drag the eraser across the tile (or just right click if it's bigger than the tile)
    
    Spoiler:

    
15. Repeat steps 8-14 until you recoloured your whole tile
    
    Spoiler:

    
16. Open A-Map again and click load tileset 2 (again 1 if you're editing the default tileset)
    
    Spoiler:

    
17. Check in A-Map if the tile looks like the tile in paint
    
    Spoiler:

    
18. Voila, you have just inserted your first tile!

Keynotes

I hope this tutorial helps anybody who doesn't know how to tile insert or if it helps out the seasoned tile inserter that wants an alternative way to tile insert. If you have any comments or questions, please feel free to post below.

Credits

• Luho- For A-Map
• Wesley FG- Tiles

But how do you insert a new pokemon center, pokemon mart and pokemon gym tileset.

[Banjora Marxvile]

Originally Posted by pikachu27

But how do you insert a new pokemon center, pokemon mart and pokemon gym tileset.

In exactly the same way. That question is kinda vague, but as they are tiles, you insert them... By tile inserting like this.

And it isn't advisable to quote the entire first post.

[bsubroncoes1]

is this kind of how u make (example) a poke center into a poke center/hotel building? i really need to know how to completely edit a tile

[refep]

FINALLY! A tutorial that works!

[jvpski3]

Dude, u r right! It is SO EASY!!!! Especially with IrfanViewer for viewing! Also, Paint is great as well.

[ShadowGrey]

You have my thanks Aljam, i know there are plenty of these tutorials about but this was clear and precise, once i had the basics down and practiced for a short while i really got the hang of it, now im familiar with all aspects of advancemap and im inserting tiles left right and centre.

Iv noticed a couple of people asking about inserting tiles instead of a pokemon centre etc, i see where the difficulties arise, the tilset for the pokemon centre, mart etc overlap, there isnt much room for additional tiles, and are based entirely on 4x4 tiles. To combat this (for example i wanted to insert an old style inn instead of a pokemon centre) You need the basic tileset (0) and the tiles you want to insert. keep in mind that because the tiles overlap you will end up with a new pokemon centre and mart of the same design. what you really want to do is divide your new tileset into 4x4 tiles, then look at it closley, you need to remove any of these tiles that are duplicates, this includes blanks, and both x and y invertions, once you have it to the lowest possible amount begin inserting over the pokecentre mart tiles, be cautious, you may have a few extra tiles here and there but there are also a few uneeded tile slots here and there. once done you will need to rebuild both the centre and the mart on your tilset, bit by bit replacing all y and x inversions.

If any one is unsure about any of these points you may contact me and i will help you out. i plan soon on making a tutorial for this, perhaps if it is okay with you Aljam I shall add it to his thread, then you wont get anymore such questions and will have a unique section of tutorial i havent found covered anywhere else.

[Aljam]

Originally Posted by ShadowGrey

You have my thanks Aljam, i know there are plenty of these tutorials about but this was clear and precise, once i had the basics down and practiced for a short while i really got the hang of it, now im familiar with all aspects of advancemap and im inserting tiles left right and centre.

Iv noticed a couple of people asking about inserting tiles instead of a pokemon centre etc, i see where the difficulties arise, the tilset for the pokemon centre, mart etc overlap, there isnt much room for additional tiles, and are based entirely on 4x4 tiles. To combat this (for example i wanted to insert an old style inn instead of a pokemon centre) You need the basic tileset (0) and the tiles you want to insert. keep in mind that because the tiles overlap you will end up with a new pokemon centre and mart of the same design. what you really want to do is divide your new tileset into 4x4 tiles, then look at it closley, you need to remove any of these tiles that are duplicates, this includes blanks, and both x and y invertions, once you have it to the lowest possible amount begin inserting over the pokecentre mart tiles, be cautious, you may have a few extra tiles here and there but there are also a few uneeded tile slots here and there. once done you will need to rebuild both the centre and the mart on your tilset, bit by bit replacing all y and x inversions.

If any one is unsure about any of these points you may contact me and i will help you out. i plan soon on making a tutorial for this, perhaps if it is okay with you Aljam I shall add it to his thread, then you wont get anymore such questions and will have a unique section of tutorial i havent found covered anywhere else.

That would be swell. It's always great to have everything in one place.

[sairuqa123]

hmm im sorry but ididn;t get it

[YouListeningROMs]

Originally Posted by sairuqa123

hmm im sorry but ididn;t get it

Any problem with the coloration when it appears in the Advanced Map screen is due to you not adhering to the colors given in the palette, which means you're gonna have a bad time.

[Cello]

Originally Posted by YouListeningROMs

Any problem with the coloration when it appears in the Advanced Map screen is due to you not adhering to the colors given in the palette, which means you're gonna have a bad time.

In addition to palette problems, it looks as if there are animated water/flower tiles in his map, which occur when you insert any tile over a preexisting animated tile.
One frame of the animation may be your new tile, but the rest will be whatever you inserted over top of.

If i'm not mistake this is either fixed by disabling the animation in a Hex editor or just flat out going back and fixing the animated tile and insert your new tile over top of one that's not animated.

[sairuqa123]

hmm i try what i see on youtube i change the colr of my tiles in the color of the palette and when i put it inside advanced map and i changed the palettes color into the real color of the tile the whole tileset in the game has been changed its color

[leachim_paloyz15]

What if, we're going to make an entire new tileset with a custom/different palette?
How are we going to insert that?