The PokéCommunity Forums

The PokéCommunity Forums (https://www.pokecommunity.com/index.php)
-   Pokémon Trading Card Game (https://www.pokecommunity.com/forumdisplay.php?f=14)
-   -   Flawed Florgres (https://www.pokecommunity.com/showthread.php?t=361056)

Keanu January 9th, 2016 6:34 AM

Flawed Florgres
 
1 Attachment(s)
Hey guys so I'm posting because. I was pulled a florgres break card from the breakthrough set number 104/162 and I noticed on the right side of the card instead of the uniform square pattern holographic it appears to be double stamped like an over lap effect. I'm assuming this is a misprint card error. Because all my other break cards including another florgres are uniform. Just curious if anyone has encountered this before or if it's worth anything. It is hard to take pictures and see the flaw but I did my best.

donavannj January 9th, 2016 9:46 PM

Quote:

Originally Posted by Keanu (Post 9069273)
Hey guys so I'm posting because. I was pulled a florgres break card from the breakthrough set number 104/162 and I noticed on the right side of the card instead of the uniform square pattern holographic it appears to be double stamped like an over lap effect. I'm assuming this is a misprint card error. Because all my other break cards including another florgres are uniform. Just curious if anyone has encountered this before or if it's worth anything. It is hard to take pictures and see the flaw but I did my best.

Based on other scans of the card I've seen, that seems like it's actually the way it's supposed to be rather than being a misprint.

Keanu January 9th, 2016 10:13 PM

1 Attachment(s)
It is extremely difficult to photograph and the holographic is tricky to get just right. But I tried again to take pictures. On half of the card instead of a uniform grid pattern. On the right side the pattern seems to have overlapped in such a way to create a 3D effect like a double print. But only on half of the card.

donavannj January 10th, 2016 8:22 PM

Quote:

Originally Posted by Keanu (Post 9070283)
It is extremely difficult to photograph and the holographic is tricky to get just right. But I tried again to take pictures. On half of the card instead of a uniform grid pattern. On the right side the pattern seems to have overlapped in such a way to create a 3D effect like a double print. But only on half of the card.

That is a bit odd.

If I had to guess the cause, probably a seam between holo sheets for the holo pattern used for this particular card. Could be wrong, though.

Keanu January 10th, 2016 8:32 PM

I think u might be right I just noticed it and can't explain how it would have occurred. I'm gonna hang on to it and see if anyone else runs into this same "error" bc it's kind of interesting lol

Alfieri January 11th, 2016 5:08 PM

It's most likely because of the way the card gets cut. Much like even if you get an authentic pack of cards, the borders vary in size. I've had some cards with large borders and some with thin.


All times are GMT -8. The time now is 3:46 AM.


Like our Facebook Page Follow us on Twitter © 2002 - 2018 The PokéCommunity™, pokecommunity.com.
Pokémon characters and images belong to The Pokémon Company International and Nintendo. This website is in no way affiliated with or endorsed by Nintendo, Creatures, GAMEFREAK, The Pokémon Company or The Pokémon Company International. We just love Pokémon.
All forum styles, their images (unless noted otherwise) and site designs are © 2002 - 2016 The PokéCommunity / PokéCommunity.com.
PokéCommunity™ is a trademark of The PokéCommunity. All rights reserved. Sponsor advertisements do not imply our endorsement of that product or service. User generated content remains the property of its creator.

Acknowledgements
Use of PokéCommunity Assets
vB Optimise by DragonByte Technologies Ltd © 2023.