![]() |
Adventures of using a backup motherboard
I had to get my desktop's motherboard serviced, and since I'm expecting that they're going to take their sweet time getting things repaired and/or replaced, judging from how fast/slow the retail shops handle warranty claims here, I've decided to also buy a backup motherboard so that I won't be stuck unable to use my desktop for the time being.
Behold, the ASRock B85M-HDS! It's an ASRock motherboard, based on the Intel B85 chipset, in the micro-ATX form factor. It's pretty basic as the feature list goes, with having the bare minimum equipment required to handle all sorts of Haswell, Haswell Refresh, and Devil's Canyon processors, two RAM slots (thankfully in dual-channel), and the bare minimum of PCI Express slots to get by with a common configuration of single video card and an additional expansion card. There seems to be a lot of cost-cutting involved in this motherboard, but most of it were in the unnecessary fluff that you'd find on higher-end motherboards. The motherboard still retains some of the most important characteristics for reliability, such as solid capacitors, and it still has a USB3 header, so compatibility with newer cases sporting USB3 front panel connectors is assured. This motherboard seems to be have a bit of a good thing going on with the SATA connectors on it - despite being traditionally-angled top-facing connectors, they're located really high up on the motherboard, so you should never run into clearance issues, even if you have a massive video card jutting out. I think the motherboard is surprisingly pleasant to use all things considered. It's now powering my desktop happily, after reinstalling Windows, while my "real" motherboard is in servicing, and I haven't found any glaring issues. It is a bit uncomfortable to have to contort the audio header under the video card, but that's a fact that you'll have to live with if you're using this motherboard with a large video card. Also not so good: you have to plug in one of the case fan headers before putting a video card in the first slot, since most dual-slot video cards will block access to this header, though it won't make it entirely unusable. The sore point of this motherboard would be the integrated audio, really. It works fine with speakers, but headphones sound rather washed out compared to higher-end audio solutions found in high-end motherboards and dedicated sound cards. Probably a matter of component selection and Realtek audio codec quality - the board doesn't do anything special with regard to its audio circuitry, and the ALC662 audio codec is extremely low-end. At least it works! I think I might update the thread with new posts if I run into anything unusual, but things are mostly uneventful, outside of the fact that the previous Windows installation didn't quite like the new motherboard and suffered a huge performance impact. I think the low-end motherboards are definitely worth considering while building a system, as long as you're aware of their potential shortfalls. |
Hmmm.
What's the price tag on this thing? It doesn't seem too bad as a backup, and it's def much better than not having access to your PC at all. |
Quote:
|
| All times are GMT -8. The time now is 5:06 PM. |
![]()
© 2002 - 2018 The PokéCommunity™, pokecommunity.com.
Pokémon characters and images belong to The Pokémon Company International and Nintendo. This website is in no way affiliated with or endorsed by Nintendo, Creatures, GAMEFREAK, The Pokémon Company or The Pokémon Company International. We just love Pokémon.
All forum styles, their images (unless noted otherwise) and site designs are © 2002 - 2016 The PokéCommunity / PokéCommunity.com.
PokéCommunity™ is a trademark of The PokéCommunity. All rights reserved. Sponsor advertisements do not imply our endorsement of that product or service. User generated content remains the property of its creator.
Acknowledgements
Use of PokéCommunity Assets
vB Optimise by DragonByte Technologies Ltd © 2023.