Research & Development Got a well-founded knack with ROM hacking? Love reverse-engineering the Pokémon games? Or perhaps you love your assembly language. This is the spot for polling and gathering your ideas, and then implementing them! Share your hypothesis, get ideas from others, and collaborate to create!

Draconius GO
Reply
 
Thread Tools
  #101    
Old April 21st, 2013 (12:42 AM).
MrDollSteak's Avatar
MrDollSteak MrDollSteak is offline
Formerly known as 11bayerf1
     
    Join Date: Dec 2008
    Location: Hong Kong
    Age: 22
    Gender: Male
    Posts: 817
    Quote:
    Originally Posted by Shadowraze View Post
    Just copy paste an amount of code and put it to free-space and test the animation. If it's working then good although it can work if you put remove some more bytes so remove the unnecessary bytes as much as possible. If I remember right animations start with E0 Correct me If I'm wrong please.. And if the animation is not working copy paste remaining codes per E0.
    Most animations start with 00 XX 27 or 00 XX 28. What I would do is just search for the bytes 08 00 and once you reach one that looks like 08 00 XX 27 or 28 chances are you're in the right place.
    __________________
    Reply With Quote

    Relevant Advertising!

      #102    
    Old April 21st, 2013 (1:17 AM).
    BlackWhiteRobin's Avatar
    BlackWhiteRobin BlackWhiteRobin is offline
       
      Join Date: Sep 2012
      Age: 19
      Gender: Male
      Nature: Quirky
      Posts: 539
      So I would go to the animation pointer and then most likely, when I see 08 00 XX 27 or 28, that's the end of the code?
      __________________

      Reply With Quote
        #103    
      Old April 21st, 2013 (5:51 AM).
      MrDollSteak's Avatar
      MrDollSteak MrDollSteak is offline
      Formerly known as 11bayerf1
         
        Join Date: Dec 2008
        Location: Hong Kong
        Age: 22
        Gender: Male
        Posts: 817
        Quote:
        Originally Posted by robin22gongon View Post
        So I would go to the animation pointer and then most likely, when I see 08 00 XX 27 or 28, that's the end of the code?
        Yup. Go to the start of the move you want and just search for 08 00 in your hex editor and keep going until you see that. The XX will be different every time. That's just a placeholder. There are some occasions where this isn't the end of the code, but as a general rule it's pretty good.
        __________________
        Reply With Quote
          #104    
        Old April 21st, 2013 (5:59 AM).
        mohammadfaizan mohammadfaizan is offline
        Latest Fashion Designs
           
          Join Date: Apr 2013
          Posts: 1
          I extra toon repointing for the episode editor with PGE 2 or 3 weeks in the past but simply haven't much launched your up-date. There's no need for like sophisticated guidelines about repointing.
          __________________
          owner of Anarkali Frocks with Churidar
          Reply With Quote
            #105    
          Old April 23rd, 2013 (5:29 PM).
          BlackWhiteRobin's Avatar
          BlackWhiteRobin BlackWhiteRobin is offline
             
            Join Date: Sep 2012
            Age: 19
            Gender: Male
            Nature: Quirky
            Posts: 539
            Hey guys! Quick question. What's the complete code for the Pound or Tackle's Animation?
            __________________

            Reply With Quote
              #106    
            Old April 23rd, 2013 (7:24 PM).
            Shadowraze's Avatar
            Shadowraze Shadowraze is offline
            ur mum
               
              Join Date: Apr 2013
              Location: ur mum
              Age: 18
              Gender: Other
              Nature: Lonely
              Posts: 798
              Quote:
              Originally Posted by robin22gongon View Post
              Hey guys! Quick question. What's the complete code for the Pound or Tackle's Animation?
              You know you can just follow the animation pointer from PGE and get the animation yourself by cutting through every 08.

              Anyways, here's your animation.

              Pound
              Spoiler:
              00 97 27 0A 01 0C 0C 08 19 7F 00 3F 02 08 7C 3E 08 02 04 00 00 00 00 01 00 02 00 03 F9 89 09 08 02 05 01 00 03 00 00 00 06 00 01 00 05 0B 01 0D 08


              Tackle
              Spoiler:
              00 97 27 0A 01 0C 0C 08 02 54 4E 3D 08 02 02 04 00 04 00 04 06 02 08 7C 3E 08 02 04 00 00 00 00 01 00 02 00 03 F9 89 09 08 02 05 01 00 03 00 00 00 06 00 01 00 19 84 00 3F 05 0B 01 0D 08
              Reply With Quote
                #107    
              Old April 23rd, 2013 (9:10 PM). Edited April 23rd, 2013 by BlackWhiteRobin.
              BlackWhiteRobin's Avatar
              BlackWhiteRobin BlackWhiteRobin is offline
                 
                Join Date: Sep 2012
                Age: 19
                Gender: Male
                Nature: Quirky
                Posts: 539
                If I use the command for a Non-scrolling BG, do I still have to use
                Code:
                0E C7 59 1D 08
                Or do I just have to put this at the end?
                Code:
                0E C7 59 1D 08


                EDIT: Sorry they were the same codes.
                __________________

                Reply With Quote
                  #108    
                Old April 23rd, 2013 (9:18 PM).
                dreamengine's Avatar
                dreamengine dreamengine is offline
                   
                  Join Date: Aug 2012
                  Gender: Male
                  Posts: 68
                  Quote:
                  Originally Posted by robin22gongon View Post
                  If I use the command for a Non-scrolling BG, do I still have to use
                  Code:
                  0E C7 59 1D 08
                  Or do I just have to put this at the end?
                  Code:
                  0E C7 59 1D 08
                  Please try to read through the whole thread before asking. I know for a fact that this has been stated by DoesntKnowHowToPlay. Anyways, the answer is yes. Where you would put 0E C7 59 1D 08, instead put 15 17 or 15 16.
                  __________________
                  I support...
                  Reply With Quote
                    #109    
                  Old April 27th, 2013 (12:35 PM). Edited April 27th, 2013 by dreamengine.
                  dreamengine's Avatar
                  dreamengine dreamengine is offline
                     
                    Join Date: Aug 2012
                    Gender: Male
                    Posts: 68
                    Well I'm back with some more interesting stuff. Sorry for the double post, but I just felt this needed a separate post. In terms of Battle backgrounds, there are a few that change depending on the user of the move. For example in hyper fang, when you're the one using it then background is number 04, but when the opponent uses it, it becomes 05. I did some research and found out how to do that, but your own custom backgrounds you inserted.

                    Still Background Version 1

                    Simply insert the following code somewhere, and instead of using 14 XX 17 to load a background use a 0E command pointing to this code.

                    04 02 03 2D C0 0B 08 02 00 21 07 01 00 C0 7D 1C 08 03 B5 EA 0D 08 02 00 21 07 00 00 B2 7D 1C 08 21 07 01 00 B9 7D 1C 08 0F 18 XX 13 B1 7D 1C 08 18 YY 13 B1 7D 1C 08 18 ZZ 13 B1 7D 1C 08

                    XX - background number when user attacks
                    YY - background number when the opponent attacks
                    ZZ - background number when targeting other opponent in double battle? Not sure.

                    Scrolling Backgrounds

                    Now, I also figured out how to do the same with scrolling backgrounds. It's actually much more simple than still backgrounds, but can be applied to still backgrounds as well.

                    First off here is our code for the scrolling background

                    03 21 B9 0B 08 02 00 21 07 01 00 UU UU UU 08 14 WW 17 03 2D B8 0B 08 05 04 00 XX 00 YY ZZ 00 FF FF

                    UU UU UU is a pointer to 14 VV 13 TT TT TT 08
                    TT TT TT is a pointer to 17
                    VV - the background number of the BG when opponent uses attack
                    WW - the background number of the BG when the user attacks
                    XX - how fast background scrolls horizontally
                    YY - how fast background scrolls vertically
                    ZZ - either 00(scrolls right) or 01(scrolls left) but only applies to when the opponent uses the move

                    Note* The tricky part with this is that you can't put the code just anywhere like you can with a regular scrolling BG. This one has must go after 00 XX 27 or 00 XX 28 at some point. Usually it goes immediately after.

                    Still Backgrounds Version 2

                    Now, I found out the scrolling method after version one of the still backgrounds. Version two is pretty much the same as scrolling.

                    Here's the code

                    03 21 B9 0B 08 02 00 21 07 01 00 UU UU UU 08 14 WW 17

                    UU UU UU is a pointer to 14 VV 13 TT TT TT 08
                    TT TT TT is a pointer to 17
                    VV - the background number of the BG when opponent uses attack
                    WW - the background number of the BG when the user attacks
                    __________________
                    I support...
                    Reply With Quote
                      #110    
                    Old April 28th, 2013 (8:15 PM).
                    MrDollSteak's Avatar
                    MrDollSteak MrDollSteak is offline
                    Formerly known as 11bayerf1
                       
                      Join Date: Dec 2008
                      Location: Hong Kong
                      Age: 22
                      Gender: Male
                      Posts: 817
                      I've been thinking about the palettes assigned to certain XX 27 or XX 28 commands, and wondering how the colours themselves are stored, and how to go about finding these palettes. The reason why I ask this, is that theoretically once we find how the game goes about assigning palettes to these commands we should either be able to edit the colours assigned to these bytes, or better yet to create new palettes. From what I've seen so far, there should be more than enough space to do this, because the XX 28 commands themselves do not go much further than 2D 28, which in theory would be an index of 28 2D, so realistically we could create ones at higher levels such as 4F 28. We should also in theory be able to assign particles to these commands as well, which may make adding new particles possible.

                      All of this is theoretical of course, I haven't been able to find such tables. For all I know they may even be hard coded. I just thought it was food for thought, and hopefully someone with more knowledge may be able to offer some insight into this.
                      __________________
                      Reply With Quote
                        #111    
                      Old May 28th, 2013 (3:16 AM).
                      rhettz_emboar's Avatar
                      rhettz_emboar rhettz_emboar is offline
                      Did you just pee??
                         
                        Join Date: Mar 2013
                        Location: Philippines
                        Gender: Male
                        Posts: 66
                        Hey! Thanks for this great Tut. Think im gonna try it.
                        But I'm a lot confused and failing a lot. I really dont have any knowledge on hex editing,Though

                        Anyway I'm gonna try my best
                        __________________


                        I hate people like you..
                        [/SIZE]
                        Reply With Quote
                          #112    
                        Old June 10th, 2013 (3:36 PM).
                        chaosakita chaosakita is offline
                           
                          Join Date: Apr 2013
                          Gender: Female
                          Posts: 15
                          I really like some of the move animations for the custom moves in Pokemon Vega. I wonder how you could port those moves to the English version. And it seems like the Japanese are much more ahead in creating custom move animations in general.

                          Here is an example, Focus Blast: it uses background 11 and something similar to Luster Purge, I guess. I think I'll try to document more of these custom moves for reference if it's allowed.
                          Reply With Quote
                            #113    
                          Old June 17th, 2013 (1:27 PM). Edited June 18th, 2013 by pawell6.
                          pawell6's Avatar
                          pawell6 pawell6 is offline
                          The truthseeker
                             
                            Join Date: Feb 2010
                            Location: Poland
                            Age: 30
                            Gender: Male
                            Posts: 50
                            Hey guys, while playing pokemon vega I noticed that creator took particles from rockslide and made it move like in icy wind. After some reasearch I figured out how to do it. Lets say we want leaves from razor leaf to move like fire in flamethrower.
                            1. First we look for animation code for flamethrower:
                            00 2D 27 0A 03 28 01 0C 0C 08 03 F9 89 09 08 05 05 00 00 00 00 02 00 2E 00 01 00 04 06 03 01 B1 0A 08 05 01 64 00 1B 8B 00 C0 3F 02 00 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 03 F9 89 09 08 05 05 01 00 03 00 00 00 2B 00 01 00 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 05 0B 03 0D 08
                            2. We look for 02 commands (animation load). There are none, so those commands are hidden in 0E command: 0E 8F FA 1C. We go to offset 1CFA8F:
                            Quote:
                            02 D0 59 3E 08 03 04 0A 00 0A 00 00 00 10 00 04 02 02 D0 59 3E 08 03 04 0A 00 0A 00 00 00 10 00 04 02 0F
                            (0F indicates return to original animation). Copy it and paste in new loaction. Don't forget to change pointers in 0E command according to your new location. Anyway we have 02 D0 59 3E 08. Offset 3E59D0:
                            Quote:
                            2D 27 2D 27 D8 C9 3A 08 CC 59 3E 08 00 00 00 00 FC 1C 23 08 25 B0 0A 08
                            This is fire particle. Repoint it to another location. Don't forget to change pointers in 02 command according to your new location. Bold part is important.
                            3. Now we look for leaf partice in razor leaf code animation. Its poniter is right behind 02 command: 02 08 2C 3E 08. Offset 3E2C08:

                            Quote:
                            4F 27 4F 27 D0 C9 3A 08 00 2C 3E 08 00 00 00 00 FC 1C 23 08 A5 2A 0A 08
                            Then we replace part of code from point 2 with bold part from point 3. Of course you have to add 00 4F 27 to the begining of the code.

                            4. So the final code is:

                            Quote:
                            00 2D 27 00 4F 27 0A 03 28 01 0C 0C 08 03 F9 89 09 08 05 05 00 00 00 00 02 00 2E 00 01 00 04 06 03 01 B1 0A 08 05 01 64 00 1B 8B 00 C0 3F 02 00 0E XX YY ZZ 08 0E XX YY ZZ 08 0E XX YY ZZ 08 03 F9 89 09 08 05 05 01 00 03 00 00 00 2B 00 01 00 0E XX YY ZZ 08 0E XX YY ZZ 08 0E XX YY ZZ 08 0E XX YY ZZ 08 0E XX YY ZZ 08 0E XX YY ZZ 08 0E XX YY ZZ 08 0E XX YY ZZ 08 05 0B 03 0D 08
                            Offset XX YY ZZ:
                            02 XX2 YY2 ZZ2 08 03 04 0A 00 0A 00 00 00 10 00 04 02 02 XX2 YY2 ZZ2 08 03 04 0A 00 0A 00 00 00 10 00 04 02 0F
                            Offset XX2 YY2 ZZ2:
                            4F 27 4F 27 D0 C9 3A 08 00 2C 3E 08 00 00 00 00 FC 1C 23 08 25 B0 0A 08
                            __________________
                            Most of new moves is done. Fixing timing of some animations and updating learnsets in progress.
                            Reply With Quote
                              #114    
                            Old June 17th, 2013 (3:01 PM).
                            karatekid552's Avatar
                            karatekid552 karatekid552 is offline
                            What happens if I push it?....
                               
                              Join Date: Nov 2012
                              Location: Do you really want to know? Really?
                              Gender: Male
                              Nature: Bold
                              Posts: 1,766
                              Quote:
                              Originally Posted by pawell6 View Post
                              Hey guys, while playing pokemon vega I noticed that creator took particles from rockslide and made it move like in icy wind. After some reasearch I figured out how to do it. Lets say we want leaves from razor leaf to move like fire in flamethrower.
                              1. First we look for animation code for flamethrower:
                              00 2D 27 0A 03 28 01 0C 0C 08 03 F9 89 09 08 05 05 00 00 00 00 02 00 2E 00 01 00 04 06 03 01 B1 0A 08 05 01 64 00 1B 8B 00 C0 3F 02 00 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 03 F9 89 09 08 05 05 01 00 03 00 00 00 2B 00 01 00 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 0E 8F FA 1C 08 05 0B 03 0D 08
                              2. We look for 02 commands (animation load). There are none, so those commands are hidden in 0E command: 0E 8F FA 1C. We go to offset 1CFA8F:
                              (0F indicates return to original animation). Copy it and paste in new loaction. Don't forget to change pointers in 0E command according to your new location. Anyway we have 02 D0 59 3E 08. Offset 3E59D0:
                              This is fire particle. Repoint it to another location. Don't forget to change pointers in 02 command according to your new location. Bold part is important.
                              3. Now we look for leaf partice in razor leaf code animation. Its poniter is right behind 02 command: 02 08 2C 3E 08. Offset 3E2C08:

                              Then we replace part of code from point 2 with bold part from point 3. Of course you have to add 00 4F 27 to the begining of the code.

                              4. So the final code is:
                              Should I inform you that we are already starting research on particle effects?

                              http://www.romhackersonline.com/social/discussions/thread/225/creating-new-particle-effects/
                              __________________

                              Paired with Simba
                              Reply With Quote
                                #115    
                              Old July 29th, 2013 (10:50 PM).
                              franx93 franx93 is offline
                                 
                                Join Date: Jul 2013
                                Gender: Male
                                Posts: 2
                                Hey guys, I'm new here, I'm from Argentina so I apologize for my bad English

                                I'd been doing some "hack", and i'm stuck with a "Bullet Punch" script.

                                I read the entire post and I can't fix the problem!

                                I'm making some new moves with the existing graphics, in the next code there are codes from "Iron Defense", "Mega Punch" and the speed background, the problem is that the background remains and I don't know where is the mistake (I really know that I may have lots of errors, but it's my first try)

                                Here's what I have:

                                Quote:
                                BULLET PUNCH:
                                14 09 17 03 2D B8 0B 08 05 04 00 0F 00 00 01 00 FF FF 1C 5F 00 C0 1C 02 03 ED 86 0B 08 05 03 00 00 00 00 00 00 02 3C 7B 3E 08 02 07 01 00 08 00 02 00 FF FF 0E 00 FF FF 00 00 05 00 97 27 00 9F 27 0A 01 0C 0C 08 11 91 7E 1C 08 0E C7 51 1D 08 08
                                Another one, "Drain punch", I want to use "Mega punch" and "Leech Life" but i have to remove the pin in the leech life animation, I don't know how! Also, the same problem with the "Mega punch" animation, i don't know how to add something after it!

                                The "Leech life" animation (don't know if this is ALL the code, maybe it's shorter):
                                Quote:
                                00 B1 27 00 A3 27 04 01 00 2F 27 00 97 27 0A 03 2A 01 0C 0C 08 04 01 02 78 72 3E 08 02 03 EC FF 0F 00 0C 00 05 02 08 7C 3E 08 02 04 00 00 00 00 01 00 02 00 19 AD 00 3F 04 02 03 F9 89 09 08 05 05 01 00 00 00 05 00 05 00 01 00 05 02 24 7B 3E 08 02 05 01 00 01 00 00 00 07 00 00 00 05 0E 44 EC 1C 08 05 04 0F 0E C9 56 1D 08 05 02 24 7B 3E 08 02 05 01 00 01 00 07 00 00 00 00 00 05 0B 03 0D 08

                                EXTRA:
                                Quote:
                                NIGHT PULSE:
                                14 00 17 00 B4 27 03 1D 8B 09 08 02 05 00 00 03 00 00 00 02 00 01 00 0E E8 75 1C 08 0E E8 75 1C 08 04 10 03 05 97 09 08 05 05 00 00 06 00 00 08 02 00 01 00 05 0E C7 59 1D 08 08

                                "Screech" and Night background (00)
                                Saludos desde Argentina
                                Reply With Quote
                                  #116    
                                Old July 31st, 2013 (8:44 AM).
                                Enigmatic Emolga's Avatar
                                Enigmatic Emolga Enigmatic Emolga is offline
                                L'énigmatique
                                   
                                  Join Date: Oct 2012
                                  Location: Somewhere in England
                                  Gender: Male
                                  Nature: Naive
                                  Posts: 30
                                  I'm trying to make Shadow Force in Fire Red using Charmander as a test and Fly as a base. Problem is, I can't tell where the complete Fly animation ends because of all the 08s! Bacause of this, after adding a background, it won't go away, which is quite frustrating as I have no idea which 08 to end on! Is there a way to tell the end of two-turned animations? If not, is there at least a Fly script for me to work off of?

                                  Also, with Attack effect 155, my attack says "********** dug a hole!" even though Fly has the exact same effect and says something different! Is there a way to expand the table to include other quotes like "********** vanished!" and implement them into new moves?
                                  Reply With Quote
                                    #117    
                                  Old July 31st, 2013 (10:35 AM). Edited July 31st, 2013 by pawell6.
                                  pawell6's Avatar
                                  pawell6 pawell6 is offline
                                  The truthseeker
                                     
                                    Join Date: Feb 2010
                                    Location: Poland
                                    Age: 30
                                    Gender: Male
                                    Posts: 50
                                    @franx93, I think I can help you. Animation for bullet punch:
                                    Quote:
                                    14 09 17 03 2D B8 0B 08 05 04 00 0F 00 00 01 00 FF FF 1C 5F 00 C0 1C 02 03 ED 86 0B 08 05 03 00 00 00 00 00 00 02 3C 7B 3E 08 02 07 01 00 08 00 02 00 FF FF 0E 00 FF FF 00 00 05 00 97 27 00 9F 27 0A 01 0C 0C 08 02 08 7C 3E 08 02 04 F8 FF F8 FF 01 00 02 00 02 10 67 3E 08 03 05 F8 FF 00 00 08 00 01 00 00 00 03 F9 89 09 08 02 05 01 00 03 00 00 00 06 00 01 00 19 84 00 3F 05 0B 01 0D 05 0E C7 59 1D 08 08
                                    First of all clearing command is 0E C7 59 1D 08, not 0E C7 51 1D 08. Next in your code there is command 11 91 7E 1C 08,which jumps to offset 1C7E91, so clearing command isn't executed. So you should copy data animation from the offset and replace it with 11 command (but there is also next jump command 13 77 7E 1C 08 which should be replaced with data from offset 1C7E77).
                                    Animation with removed pin:
                                    Quote:
                                    00 B1 27 00 A3 27 04 01 00 2F 27 00 97 27 0A 03 2A 01 0C 0C 08 04 01 02 08 7C 3E 08 02 04 00 00 00 00 01 00 02 00 19 AD 00 3F 04 02 03 F9 89 09 08 05 05 01 00 00 00 05 00 05 00 01 00 05 02 24 7B 3E 08 02 05 01 00 01 00 00 00 07 00 00 00 05 0E 44 EC 1C 08 05 04 0F 0E C9 56 1D 08 05 02 24 7B 3E 08 02 05 01 00 01 00 07 00 00 00 00 00 05 0B 03 0D 08
                                    where 02 78 72 3E 08 02 03 EC FF 0F 00 0C 00 was removed. You can easily identify the particle:
                                    in the last code there is 02 XX XX XX 08 YY ZZ, where XX XX XX is a pointer, YY byte of uknown meaning and ZZ is a byte which indicates how long is code: next 2*ZZ bytes belong to that particle. After that usually there is next particle (starts with 02), 05 command, 04 TT (waiting command, TT is waitng time) , some sound command (19, 1C or 1D) or 0E command. In our example ZZ is 03 so next 6 bytes belong to the particle (EC FF 0F 00 0C 00).

                                    Edit: The same rule aplies to 03 XX XX XX 08 command, which usually shakes sprites or loads different animation.
                                    __________________
                                    Most of new moves is done. Fixing timing of some animations and updating learnsets in progress.
                                    Reply With Quote
                                      #118    
                                    Old July 31st, 2013 (11:37 AM).
                                    Ultraxwing's Avatar
                                    Ultraxwing Ultraxwing is offline
                                    DonDon~Chan
                                       
                                      Join Date: Jul 2013
                                      Gender: Male
                                      Posts: 7
                                      Hello, i'm working on a project that i wish to keep secret as for now. i have the PGE and it has the animation pointer. i do understand Hex, well enough how could i go about using that seeing how i make many mistakes involving hex, though i do plenty of backups. is there any way of using what might be considerably easier. or is this method much preferred? Mind you i would much prefer the animation pointer versus this to be 100% honest.
                                      Reply With Quote
                                        #119    
                                      Old August 1st, 2013 (1:24 AM). Edited August 1st, 2013 by Enigmatic Emolga.
                                      Enigmatic Emolga's Avatar
                                      Enigmatic Emolga Enigmatic Emolga is offline
                                      L'énigmatique
                                         
                                        Join Date: Oct 2012
                                        Location: Somewhere in England
                                        Gender: Male
                                        Nature: Naive
                                        Posts: 30
                                        Okay, so we know how to add backgrounds to attacks, but what about removing them?

                                        From what I can gather, this is Luster Purge's animation.
                                        Quote:
                                        00 1B 28 00 97 27 14 03 16 03 B5 E7 0D 08 05 00 17 0A 00 0C 0C 08 19 C2 00 C0 02 48 71 3E 08 29 04 00 00 00 00 00 00 00 00 04 14 03 3D A8 0B 08 05 05 05 00 02 00 00 00 10 00 FF FF 03 21 AA 0B 08 05 05 1B 28 02 00 00 00 10 00 FF FF 05 03 21 AA 0B 08 05 05 97 27 00 00 0C 00 0C 00 00 5C 05 02 50 7C 3E 08 83 02 01 00 02 00 03 DD D3 0D 08 05 02 D0 00 3F 00 04 03 02 50 7C 3E 08 83 02 01 00 02 00 03 DD D3 0D 08 05 02 D0 00 3F 00 04 03 02 50 7C 3E 08 83 02 01 00 02 00 03 DD D3 0D 08 05 02 D0 00 3F 00 04 03 02 50 7C 3E 08 83 02 01 00 02 00 03 DD D3 0D 08 05 02 D0 00 3F 00 04 03 02 50 7C 3E 08 83 02 01 00 02 00 03 DD D3 0D 08 05 02 D0 00 3F 00 04 03 02 50 7C 3E 08 83 02 01 00 02 00 03 DD D3 0D 08 05 02 D0 00 3F 00 05 03 3D A8 0B 08 05 05 05 00 02 00 10 00 00 00 FF FF 03 B5 94 0B 08 05 03 01 00 05 00 0E 00 05 0B 00 0D 0E C7 59 1D 08 08
                                        The highlighted values are the background codes. I copied the code into an empty area, removed the background codes, repointed the attack animation data and tested. The game crashed and reset. Is there something more to this, or do I need to replace the BG codes with FF and not close the gaps?

                                        EDIT: Just noticed something else. Merely copying the animation and pasting it makes the game crash if the copy is used.
                                        Reply With Quote
                                          #120    
                                        Old August 1st, 2013 (3:25 PM).
                                        franx93 franx93 is offline
                                           
                                          Join Date: Jul 2013
                                          Gender: Male
                                          Posts: 2
                                          @pawell6 Thaaaaanks, you're a hero! I find it quiet difficult to learn this because of the lenguaje.
                                          Thanks again!!
                                          Reply With Quote
                                            #121    
                                          Old August 4th, 2013 (9:25 AM). Edited August 4th, 2013 by xGal.
                                          xGal xGal is offline
                                          Mhm
                                             
                                            Join Date: Nov 2011
                                            Location: A tree
                                            Gender: Other
                                            Nature: Relaxed
                                            Posts: 243
                                            EDIT: Figured it out, I am so dumb...

                                            See more on VM :/
                                            __________________
                                            Reply With Quote
                                              #122    
                                            Old December 14th, 2013 (9:06 PM).
                                            misterpoor's Avatar
                                            misterpoor misterpoor is offline
                                               
                                              Join Date: Dec 2013
                                              Gender: Male
                                              Posts: 13
                                              I'm a newbie and the tutorial is too advanced for me to understand. Could somebody please guide me easier to understand? Such as where must I put these code?
                                              __________________
                                              Reply With Quote
                                                #123    
                                              Old January 18th, 2014 (6:18 AM).
                                              wael96 wael96 is offline
                                                 
                                                Join Date: Jul 2013
                                                Location: Beijing,China
                                                Gender: Male
                                                Posts: 38
                                                Well, I am a still a beginner now, which tutorial should I read first in order to understand this tutorial?
                                                Reply With Quote
                                                  #124    
                                                Old January 18th, 2014 (10:43 AM).
                                                Sniper's Avatar
                                                Sniper Sniper is offline
                                                ふゆかい
                                                   
                                                  Join Date: Nov 2013
                                                  Location: Philippines
                                                  Gender: Male
                                                  Nature: Quiet
                                                  Posts: 1,453
                                                  Quote:
                                                  Originally Posted by wael96 View Post
                                                  Well, I am a still a beginner now, which tutorial should I read first in order to understand this tutorial?
                                                  First post I believe. lol
                                                  __________________


                                                  Reply With Quote
                                                    #125    
                                                  Old February 5th, 2014 (6:11 AM). Edited February 5th, 2014 by Leafbarrett.
                                                  Leafbarrett's Avatar
                                                  Leafbarrett Leafbarrett is offline
                                                     
                                                    Join Date: Mar 2009
                                                    Age: 25
                                                    Gender: Male
                                                    Posts: 75
                                                    So, if nobody else is going to try to help out Emerald hackers, I guess I'll do my bit. Just don't be mad if I get literally everything wrong, because I haven't got a ****ing clue what I'm doing - I'm just blindly stumbling around, trying to search for the non-pointer byte patterns from this tutorial. I'd appreciate it if Chaos Rush would put this stuff in the OP, so other people don't have to guess at this stuff, but...

                                                    14 WW 16 03 61 76 11 08 05 04 00 XX 00 YY ZZ 00 FF FF
                                                    The fragment of hex used in Emerald for background movement (the pointer is different). All the background IDs are still accurate. Haven't tested, but I presume replacing 16 with 17 has the same effect as in Fire Red.

                                                    As a side note, because I couldn't for the life of me find any information for this, the pointer for the second animation for Sky Attack is 2CD28E in Emerald. Still no idea where Skull Bash is.
                                                    Reply With Quote
                                                    Reply

                                                    Quick Reply

                                                    Join the conversation!

                                                    Create an account to post a reply in this thread, participate in other discussions, and more!

                                                    Create a PokéCommunity Account

                                                    Sponsored Links
                                                    Thread Tools

                                                    Posting Rules
                                                    You may not post new threads
                                                    You may not post replies
                                                    You may not post attachments
                                                    You may not edit your posts

                                                    BB code is On
                                                    Smilies are On
                                                    [IMG] code is On
                                                    HTML code is Off

                                                    Forum Jump


                                                    All times are GMT -8. The time now is 8:43 AM.