~Kian~'s ATTEMPT at spriting ENJOY!

Started by ~Kian~ October 26th, 2010 4:34 PM
  • 1680 views
  • 15 replies

~Kian~

Spriter In The Making

Male
ENGLAND ^.^
Seen November 7th, 2016
Posted August 20th, 2011
698 posts
13.9 Years
Well hi guys, i am what you would call a NOOB spriter, i have been trying to learn to sprite fakemon but it is hard, but i finally feel i have some sprite ideas that i am not ashamed to show :D so please enjoy, i would love some constructive critisism :). My sprites are not to used in hacks/games at the moment but as time goes on i may change my mind. None of these are 100% completed and i know that the outlines need to be softened so dont worry about that :)

First of all my favorate sprites so far -Seirus + Saluchi + Saluchomp-

----> ---->
1st EVOLUTION
It is rather small but i hope you can see :), it is 100 Scratched although i have used some of Huntail's colours.
The evolutions are very big, its just the idea of it though, mainly because the are so big the dont really count as sprites :D.

Next up is a dino fake - BOURKU -



Again small so i hope you can see :), it is steel and ground type, i have used bastiodon's colours for this one :)

Next up is the dino fakes Evo, kinda basic -BAKANGO -

----> Improvement?, (Or does it just look like it has the plague?) ----> added shield chest? Improvement?

not as small as the others, again steel and ground type with bastiodon's colours.

Next up is a bug type - no name -

----> = improvement?? :)

there are 3 because i didnt know what design to use, i would love for you guys/gals to help me choose thank-you :) i have used scizor's colours for this one :) and if you didn't know its a two-headed bug :D

Next up is another water fakemon - No name -



Rather small, crocodile pokemon; steel/water type, i have used gyrados' and steelix's colour's for this fake :)

Next up Two more dino or maybe dragon fakes - No Name -



The Really like the first one but not too keen on the 2nd, but no colours used from other sprites this time :D

This is my first attempt at a ghost fakemon; - No Name -



I am not a giant fan of this one, i dont like the way is has turned out, but i like the markings on the body and head. :)

I will be adding some more sprites when i get around to colouring them :), i hope you guys enjoyed these sprites. More are on the way.

Credits;
KK Maloney - my lil' helper :)


~Kian~

Samson

no, i don't know milk drink

Age 34
Phoenix, AZ
Seen October 7th, 2015
Posted June 30th, 2011
2,550 posts
16.9 Years
you have a great grasp of the basics of spriting in the pokemon style but i think you need to focus on refining your designs.

draw your designs on paper first and then approach spriting.

anywho, looking forward to seeing some more from ya.

[FONT="Calibri"][SIZE="4"][COLOR="gray"]FC: 3497 0883 2077
[/URL]

~Kian~

Spriter In The Making

Male
ENGLAND ^.^
Seen November 7th, 2016
Posted August 20th, 2011
698 posts
13.9 Years
you have a great grasp of the basics of spriting in the pokemon style but i think you need to focus on refining your designs.

draw your designs on paper first and then approach spriting.

anywho, looking forward to seeing some more from ya.
Thank-you, and about the drawing on paper, i cannot draw AT ALL i am terrible. Is there any other way i can refine my spriting without drawgin on paper? :)

~Kian~

'tyranilacegon'
Made By The Mystery Egg,
Please visit his Fusion thread.

Esper

California
Seen June 30th, 2018
Posted June 30th, 2018
Thank-you, and about the drawing on paper, i cannot draw AT ALL i am terrible. Is there any other way i can refine my spriting without drawgin on paper? :)

~Kian~
These are all good starts. The key thing missing at this point is detail. One way you could encourage yourself to take that step would be to look at well-made sprites and see how they are constructed. Zoom in on them and get close. It's the finer details where a lot of okay work becomes good or great work. Look at the official pokemon sprites as a start.

But I'm getting ahead of myself. The pencil and paper idea really is a good way to get ideas out. It's quick and easy. You're not trying to design a sprite's final shape on paper necessarily. You're coming up with ideas and trying them out in a way that doesn't take as long as it would to add them pixel by pixel to your sprites. It's just a "Hmm, maybe if I put a horn there... nah, maybe if it looks like this" kind of process.

Of course you can do all that on the computer, but I think that's better to do when you have a solid concept of what you want to make.

~Kian~

Spriter In The Making

Male
ENGLAND ^.^
Seen November 7th, 2016
Posted August 20th, 2011
698 posts
13.9 Years
These are all good starts. The key thing missing at this point is detail. One way you could encourage yourself to take that step would be to look at well-made sprites and see how they are constructed. Zoom in on them and get close. It's the finer details where a lot of okay work becomes good or great work. Look at the official pokemon sprites as a start.

But I'm getting ahead of myself. The pencil and paper idea really is a good way to get ideas out. It's quick and easy. You're not trying to design a sprite's final shape on paper necessarily. You're coming up with ideas and trying them out in a way that doesn't take as long as it would to add them pixel by pixel to your sprites. It's just a "Hmm, maybe if I put a horn there... nah, maybe if it looks like this" kind of process.

Of course you can do all that on the computer, but I think that's better to do when you have a solid concept of what you want to make.
Well thanks for the advice, i try to come up with ideas, like your example of the horn, but i do it all on paint :), but you are right it is alot better on paper. Also i was looking at sprites today and i think if i put markings and unique features on the sprites they might look more professional and more like pokemon, do you think that would help? :D

UPDATE:


Two ground/dragon? maybe..

these are 100% scartched and i have made up the colours without other sprites, that maybe why the colours suck ;). The horns spikes on the body are not looking any good, can anyone help ? :D

~Kian~

'tyranilacegon'
Made By The Mystery Egg,
Please visit his Fusion thread.

The 100 Mega Shock

Male
Seen March 10th, 2013
Posted March 23rd, 2012
1,234 posts
12.7 Years
The colour of the lines could do with a lot of reworking for one, because it's very hard to actually see the difference in line colour between the light and dark areas of the spikes, or on the body in general.

Look at a lot of official Pokémon sprites. When outlining parts of the sprite which are being lit, they usually create a noticeably darker shade than the shadow colour that and use that, and go darker than that (sometimes black if it's dark enough) to outline the shaded parts of a sprites.

~Kian~

Spriter In The Making

Male
ENGLAND ^.^
Seen November 7th, 2016
Posted August 20th, 2011
698 posts
13.9 Years
The colour of the lines could do with a lot of reworking for one, because it's very hard to actually see the difference in line colour between the light and dark areas of the spikes, or on the body in general.

Look at a lot of official Pokémon sprites. When outlining parts of the sprite which are being lit, they usually create a noticeably darker shade than the shadow colour that and use that, and go darker than that (sometimes black if it's dark enough) to outline the shaded parts of a sprites.
Ok thank-you, ill darken the outlines when i get a chance :D,

Right well here is my first attempt at a ghost type, i was going for a sort of Ralts feel to it. The shading is terrible worse than usual ;) i am really not happy with this at all.. but im going to show it anyway;



Please can more people try to comment i have lots of sprites i could show but i want to save em for updates later on.. while doing that ill be editing sprites already on the thread and making new one :) thank-you.

HOW ABOUT SOME NAMES FOR THE FAKES PLEASE GUYS :D

P.s; I have also got the evolution idea for the first water sprite ready, just need to make it smaller :D

~Kian~

'tyranilacegon'
Made By The Mystery Egg,
Please visit his Fusion thread.

~Kian~

Spriter In The Making

Male
ENGLAND ^.^
Seen November 7th, 2016
Posted August 20th, 2011
698 posts
13.9 Years
Bit of a bump or an update if you will ;) NEW EVOLUTION;

.... ---->

I know its huge and its only its 2nd evolutionary stage :) but what do you think? its just the idea for it.. Please post guys try to keep this thread as active as possible and i will try to keep this thread as FULL as possible ;)..

P.s; keep looking at the top of the page because thats where the updates and improvements will be, if i dont post em like this (:

~Kian~

'tyranilacegon'
Made By The Mystery Egg,
Please visit his Fusion thread.

KK Moloney

Epilyptic Donkey Rhino

Age 83
Male
The North Pole
Seen December 2nd, 2020
Posted November 6th, 2013
33 posts
12.9 Years
These are very good and definitely better than me. I am learning to sprite too and I hope that you become a professional spriter. I would like to see you make a fakedex with these, that would be pretty cool!!!

Names........................Seirus I think should be the little water one at the very top of the page and then the evolution of it should be............Saluchi.
Those are the only names I have come up with for now but Ill try to think of more later.
Cattle are meant to dwell in trees.
Orsk
---------------------------------------------------------
MILK IS A VERY VALUABLE INGREDIENT(*)

~Kian~

Spriter In The Making

Male
ENGLAND ^.^
Seen November 7th, 2016
Posted August 20th, 2011
698 posts
13.9 Years
These are very good and definitely better than me. I am learning to sprite too and I hope that you become a professional spriter. I would like to see you make a fakedex with these, that would be pretty cool!!!

Names........................Seirus I think should be the little water one at the very top of the page and then the evolution of it should be............Saluchi.
Those are the only names I have come up with for now but Ill try to think of more later.
Well thank-you, that means alot, and i too hope i can become a professional fakemon spriter like the other great spriters on PokeCommunity :D..

Id love to be able to make a whole fakedex, maybe i will.. and maybe by the time i finish it, i would of sharpened my hacking skills and i could put them into a game :D.. sounds like a plan ;)..

And thank-you for the names, i like them original and suits a water type..
you are good at names, fancy thinking up anymore for me.. thanks :D..

good luck with your spriting also :)

Update;
right well that post made me want to finish the first water sprites evolutionary line, HERE IS ITS FINAL EVOLUTION Saluchomp;



I am rather proud of this sprite and its name :D, and well i love its evolutionary line as a whole, what do you guys think.. :)

~Kian~

KK Moloney

Epilyptic Donkey Rhino

Age 83
Male
The North Pole
Seen December 2nd, 2020
Posted November 6th, 2013
33 posts
12.9 Years
WOW!!!!
The new one is amazing!!!!!
I really like it. And your name suits it well too!
Thanks for liking my names and using them.

I have thought up a name for the baby dino fake that is steel/ground:
BOURKU
Its Evolution:
BAKANGO

Hope you like 'em.
If you don't, be sure to tell cause I may be able to come up with another.
Cattle are meant to dwell in trees.
Orsk
---------------------------------------------------------
MILK IS A VERY VALUABLE INGREDIENT(*)

KK Moloney

Epilyptic Donkey Rhino

Age 83
Male
The North Pole
Seen December 2nd, 2020
Posted November 6th, 2013
33 posts
12.9 Years
Well, I usually look up japanese names of animals or whatever the fakemon looks like and use part of that word and part of the English word. Then, I might add an extra "y" at the end or "o" or "u" or whatever. Than other times I might just come up randomly with a name that sounds cool and it works!!!! I am very excited to see your new one and also, I have a suggestion. For BAKANGO I would suggest using the first one's tail with the second one's body.
Cattle are meant to dwell in trees.
Orsk
---------------------------------------------------------
MILK IS A VERY VALUABLE INGREDIENT(*)
Seen July 18th, 2013
Posted February 27th, 2013
296 posts
14.7 Years
i think of opening PC after a long tie and wht a sight to see a familiar name in the spotlight in pixel art !!!!!

they're awesome kian!!! u finally got awesome dude !!! I wish you the best and i hope to see even better work from you !! its good to see one of us is still on PC !!!

and about rating i'll give em 3.5/5 because they still arent the best but they're pretty good !! my fav is BAKANGO it looks great with the shields
If you aint doin anythin you could view my blog: twinkietalks.blogspot.com


and I LIKE PEANUTS !!!!!

The 100 Mega Shock

Male
Seen March 10th, 2013
Posted March 23rd, 2012
1,234 posts
12.7 Years
Update;
right well that post made me want to finish the first water sprites evolutionary line, HERE IS ITS FINAL EVOLUTION Saluchomp;



I am rather proud of this sprite and its name :D, and well i love its evolutionary line as a whole, what do you guys think.. :)

~Kian~
The shading across the entire sprite is very jagged (the shading doesn't curve naturally so it looks very jagged and strange instead of being a smooth division - a lot of the curves in the outlines are also drawn poorly), some of the shading is rather suspect (like the back legs having any light), the eyes are particularly underdetailed and hard to decipher, the highlight seems tacked-on and again not very smoothly drawn, the outlines don't change colour between light and dark areas of the sprite. You've also got some rough outlines that should have been cleaned up around the head.

The design in general is very under-detailed, and doesn't really bring across the idea of a final stage of an evolution line - it's basically the first form made a bit bigger with some extra fins.

~Kian~

Spriter In The Making

Male
ENGLAND ^.^
Seen November 7th, 2016
Posted August 20th, 2011
698 posts
13.9 Years
i think of opening PC after a long tie and wht a sight to see a familiar name in the spotlight in pixel art !!!!!

they're awesome kian!!! u finally got awesome dude !!! I wish you the best and i hope to see even better work from you !! its good to see one of us is still on PC !!!

and about rating i'll give em 3.5/5 because they still arent the best but they're pretty good !! my fav is BAKANGO it looks great with the shields
thank-you very much, i like that one also :D.. glad to be back as well. thanks alot mate.

The shading across the entire sprite is very jagged (the shading doesn't curve naturally so it looks very jagged and strange instead of being a smooth division - a lot of the curves in the outlines are also drawn poorly), some of the shading is rather suspect (like the back legs having any light), the eyes are particularly underdetailed and hard to decipher, the highlight seems tacked-on and again not very smoothly drawn, the outlines don't change colour between light and dark areas of the sprite. You've also got some rough outlines that should have been cleaned up around the head.

The design in general is very under-detailed, and doesn't really bring across the idea of a final stage of an evolution line - it's basically the first form made a bit bigger with some extra fins.
yeah i agree with all about the shading and the the curves need to be tidied up, i did that sprite at 3 in the mourning ;) ill touch it up.. i dont agree about it just being bigger and having more fins though. official sprites do that also, for example; Machamp and Machoke.. but thank-you anyway..

UPDATE
well i havn't updated in a while so here is a sprite i did a while ago i am having real trouble with it, but i wish i could improve it, so guys advice please, its an ant eater pokemon;



~Kian~