Patch MrDollSteak's Decap. and Attack Rombase Page 23

Started by MrDollSteak September 2nd, 2013 7:51 AM
  • 361827 views
  • 929 replies
Male
Seen June 28th, 2016
Posted July 5th, 2015
16 posts
8 Years
Worked?
Boom, served!
I just changed the extension from .ini to .txt, 'cause the site won't let me upload inis bigger than 10 KB. Change it back before applying and you should be good.
Hey I'm sorry, but i am getting errors for my G3HS, all the attacks are showing up as \x. Can you help? Thanks man
Male
São Paulo, Brasil
Seen November 1st, 2021
Posted September 7th, 2019
275 posts
8 Years
Hey I'm sorry, but i am getting errors for my G3HS, all the attacks are showing up as \x. Can you help? Thanks man
The attack names table must have been probably repointed. I patched some evos after MrDS's Rombase. Maybe the guy from my ini did some alterations, though I'm not sure if he did those there...

MrDollSteak

Formerly known as 11bayerf1

Age 28
Male
Hong Kong
Seen March 16th, 2023
Posted September 26th, 2022
859 posts
14.4 Years
Please don't repost the .ini after editing it.

My .ini works 100%, if it doesn't it's because you've done something wrong.

Please read the instructions. It works for everyone that follows the instructions.
Male
São Paulo, Brasil
Seen November 1st, 2021
Posted September 7th, 2019
275 posts
8 Years
Please don't repost the .ini after editing it.

My .ini works 100%, if it doesn't it's because you've done something wrong.

Please read the instructions. It works for everyone that follows the instructions.
Sorry MrDS, just trying to help. =/
Man, do you know why PGE and G3T won't reckon Fairy?
Also, it appears as type 23. What are the other types between Dark and Fairy?

MrDollSteak

Formerly known as 11bayerf1

Age 28
Male
Hong Kong
Seen March 16th, 2023
Posted September 26th, 2022
859 posts
14.4 Years
Sorry MrDS, just trying to help. =/
Man, do you know why PGE and G3T won't reckon Fairy?
Also, it appears as type 23. What are the other types between Dark and Fairy?
PGE never recognises Fairy. It's hard coded.

G3T I'm not sure. It works fine when I use the .ini.

The types between Dark and Fairy aren't types as such, but general graphics such as 'name, type, effect,' that appear in the move relearner and stat screens.
Male
São Paulo, Brasil
Seen November 1st, 2021
Posted September 7th, 2019
275 posts
8 Years
PGE never recognises Fairy. It's hard coded.

G3T I'm not sure. It works fine when I use the .ini.

The types between Dark and Fairy aren't types as such, but general graphics such as 'name, type, effect,' that appear in the move relearner and stat screens.
Got it. Thanks for the input.
Also, man, since you are answering, I wonder if I can change the palettes of the Summary of Pokémon. Letter shades are a bit darker and some icons, as Normal type (only one I noticed so far), are different. Is there any way to change it back to the original Fire Red colors?
No biggie though, if I can't. Just wondered as it was a weird change.

MrDollSteak

Formerly known as 11bayerf1

Age 28
Male
Hong Kong
Seen March 16th, 2023
Posted September 26th, 2022
859 posts
14.4 Years
Got it. Thanks for the input.
Also, man, since you are answering, I wonder if I can change the palettes of the Summary of Pokémon. Letter shades are a bit darker and some icons, as Normal type (only one I noticed so far), are different. Is there any way to change it back to the original Fire Red colors?
No biggie though, if I can't. Just wondered as it was a weird change.
The reason that happened was because of the Fairy type. You have to edit the palette and image of the type table.
Male
São Paulo, Brasil
Seen November 1st, 2021
Posted September 7th, 2019
275 posts
8 Years
The reason that happened was because of the Fairy type. You have to edit the palette and image of the type table.
Thanks man! I'll try that.
If you need help with stuff, ask. =D

EDIT: Tried opening the type table with NSE following this:

When I clicked on status, though, the type table was a blank square with a single color.
What do I do?

EDIT 2: Checked the new offsets for the tables, thanks for those.
I did found them, but they look like this:
Type Icons.png
It was a bit tricky, but I managed to change the type icons to match recent generations, plus I changed a bit some others.
Do you know how I can change the text? It's darker only in the summary of the Pokémon... =/

shubham2207

Lone Wolf

Age 27
Male
Earth
Seen January 2nd, 2017
Posted October 6th, 2016
243 posts
10.4 Years
Nice work there brother. I successfully patched your ips into a clean rom.

I just wanted to know the list of hacking tools compatible with this patch. Sorry if this question is repeated.

thanks in advance.
JOB :- PLAY AND FINISH ALL POKEMON HACKS !!
Male
São Paulo, Brasil
Seen November 1st, 2021
Posted September 7th, 2019
275 posts
8 Years
Nice work there brother. I successfully patched your ips into a clean rom.

I just wanted to know the list of hacking tools compatible with this patch. Sorry if this question is repeated.

thanks in advance.
G3HS, G3T, PGE according to OP.
I managed to make work AIE and Type Effectiveness Editor recently.
There are other tools I'm sure might work with this. Just keep trying. =D

shubham2207

Lone Wolf

Age 27
Male
Earth
Seen January 2nd, 2017
Posted October 6th, 2016
243 posts
10.4 Years
G3HS, G3T, PGE according to OP.
I managed to make work AIE and Type Effectiveness Editor recently.
There are other tools I'm sure might work with this. Just keep trying. =D
PGE was not working for me. i copied the ini file for PGE from patch's PGE folder but still some sort of error came when i tried to use the in built programs of PGE.

EDIT:- Advance Trainer isn't working as well
Male
São Paulo, Brasil
Seen November 1st, 2021
Posted September 7th, 2019
275 posts
8 Years
PGE was not working for me. i copied the ini file for PGE from patch's PGE folder but still some sort of error came when i tried to use the in built programs of PGE.

EDIT:- Advance Trainer isn't working as well
I had a problem aswell. If you downloaded a recent version of PGE (which is very likely), you'll have to write the offsets manually, as PGE's ini version that came with the Rombase is for the older versions.
Just open both inis (Rombase's and PGE's default - make a backup of the default first) and check under the [BPRE] section what offsets are diferrent (do not consider the "@H" before each MrDS's offsets). Change the different offsets to match MrDS's and it will work. =D

shubham2207

Lone Wolf

Age 27
Male
Earth
Seen January 2nd, 2017
Posted October 6th, 2016
243 posts
10.4 Years
I had a problem aswell. If you downloaded a recent version of PGE (which is very likely), you'll have to write the offsets manually, as PGE's ini version that came with the Rombase is for the older versions.
Just open both inis (Rombase's and PGE's default - make a backup of the default first) and check under the [BPRE] section what offsets are diferrent (do not consider the "@H" before each MrDS's offsets). Change the different offsets to match MrDS's and it will work. =D
can you send the ini here? manual working is hard brother :P sorry for bothering.

Bobsomeness

Pure Bobsomeness

Male
Pallet Town
Seen September 9th, 2020
Posted April 28th, 2017
214 posts
8.1 Years
Somebody probably already posted this but anyway:
When I opened G3HS, the evolutions are missing and whenever I click on a pokemon that has a greater pokedex number than Umbreon, the game crashes. Any idea why?
Sorry if I'm just making things worse.
This signature has been disabled.
Too tall
Please review and fix the issues by reading the signature rules.

You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.

Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Male
São Paulo, Brasil
Seen November 1st, 2021
Posted September 7th, 2019
275 posts
8 Years
Not a doubt really, I'm just curious what has changed. Take this as a discussion post.
Every time I play the first battle using my Charmander I'll loose to my Rival's Squirtle, which happened before I patched, but very rarely.
Were the Pokémon changed, or Tail Whip got a higher defense change. I noticed status attacks are making a hell of a difference now...
My Main Team:


Not a doubt really, I'm just curious what has changed. Take this as a discussion post.
Every time I play the first battle using my Charmander I'll loose to my Rival's Squirtle, which happened before I patched, but very rarely.
Were the Pokémon changed, or Tail Whip got a higher defense change. I noticed status attacks are making a hell of a difference now...
Tackle's BP is 50 instead of 35, but Charmander is stuck with a 40 BP Scratch. So that's why squirtle is hitting harder.
Male
São Paulo, Brasil
Seen November 1st, 2021
Posted September 7th, 2019
275 posts
8 Years
Tackle's BP is 50 instead of 35, but Charmander is stuck with a 40 BP Scratch. So that's why squirtle is hitting harder.
Uuuh, thanks man. Didn't know that.
~ Just thought of a nice ability. ~
But status moves do seem to be working better now. Tail Whip never made me be hit hard like I am being hit now. I like that, it takes the game to the next level.
My Main Team:


Age 22
Female
Seen 2 Days Ago
Posted August 22nd, 2021
105 posts
9 Years
Another bug I unearthed recently. I don't think the Eviolite works properly. Now, it may be because I discovered this in a hack (Kanto Black, which uses this ROMbase), or because the Pokemon I had given the Eviolite to (Lampent) evolved through a stone not native to the game, but it seemed to take the same (or approximately the same) amount of damage whether it was holding the Eviolite or not.

Splash

But nothing happened.

Male
Just use an Old Rod
Seen 6 Days Ago
Posted September 9th, 2020
658 posts
13.6 Years
Another bug I unearthed recently. I don't think the Eviolite works properly. Now, it may be because I discovered this in a hack (Kanto Black, which uses this ROMbase), or because the Pokemon I had given the Eviolite to (Lampent) evolved through a stone not native to the game, but it seemed to take the same (or approximately the same) amount of damage whether it was holding the Eviolite or not.
You're right about eviolite being incomplete but I hope MrDS can fix it not only to be accessible to those who use stones but also for the Mega Evos hehe
༼ つ ◕_◕ ༽つ PRAISE Splash ༼ つ ◕_◕ ༽つ
|VM|PM
|

SidDays

Professional Lurker

Age 27
Male
India
Seen March 30th, 2023
Posted August 24th, 2022
143 posts
14.2 Years
G3HS won't load a patched ROM. I have no idea what I'm doing wrong:
1. downloaded a clean firered rom (u) squirrels. [also tried 2 other dumps]
2. applied 1.5a to it using Lunar IPS
3. downloaded g3hs, replaced pokeroms ini with one from 1.5a
4. ran g3HS, on "Open Rom"-ing the patched rom, I get the following message:

"At rom offset 0xfffffe there is an unknown rom id..."

EDIT: Looked back at this thread and I'm not the first person this is happening to, oops, but couldn't find a solution, should I just wait for 1.6/the next update?

EDIT2: this fix works, my bad. Please do fix the INI in the next patch tho, also thanks for your amazing work!

Hey, I know how to apply the patch. It's actually pretty simple. So, first you have to download the patch and there should be a folder called "G3HS ini". In this folder there's a text file. Open it and search for "[MrDS]". It's on the bottom of this file. Change it to "[0000]".
Now, go to your Gen 3 Hacking Suite(the program's, NOT PATCH!) folder and replace the ORIGINAL "pokeroms.ini" file with the one you DOWNLOADED AND MODIFIED. If you did everything correctly, it should work.