Jakob99
Worlds greatest trainer.
- 82
- Posts
- 11
- Years
- Farmington AR
- Seen Apr 12, 2024
Also can someone make a program that simplifies this please? This is too complicated and after 3+ hours invested into this am throwing in the towel/
I had similar problem (at least with psywave). To fix it:
1. Make back up of your rom and ini file.
2. Open your rom wirh hex editor and go to offset: 0x4886E8.
3. Select block: 4*354=1416 bytes and copy (description attack table).
4. Use FSF, find 1416 bytes or find your own location (write down that location), select block 1416 and paste. (I pasted my at 0x950000).
5. Repointing: Go to the begining of file, Edit->Replace...->Find box: E8864808, Replace box: 00009508 (or pointer to your location from step 4) with direction down. Replace all.
6. Go to 0x950000 select block : 4*157=628 bytes, copy.
7. Go to end of new table (0x950000, first FF), select block 628 and paste.
8. Save and exit.
9. Open your ini file in notebook and go to AttackDescriptionTable for BPRE and change its value from &H4886E8 to &H950000.
I hope it'll fix the problem. :)
HUM... ok i got to edit the new moves in GBA Game Editor, but they wont show on up on YAPE ...and in GEN3 SUITE causes several errors... also tried to edit the rom data in those application, any help would be appreciated
Well then, try my tool. (link in signature)
With G3T you don't need to specify new offsets.
Hey everyone, I've bumped into a problem that I cannot seem to find the answer by myself. I'm coming here to ask for a little help because maybe someone bumped into this problem like me and has/had a resolve to it. I'm trying to figure out how all this thing with Hex editing works and all that and I've been following this tutorial exactly as it says in it, I've done it 3 times with the same offsets like in this tut for repointing and with different offsets that I've found by myself as well, but everytime I edit/update/change the .ini file with the new offsets I run into this problem >>
Spoiler:![]()
I've even followed two different tutorials and I am getting the same error and I don't know what is the problem where I am going wrong or what I don't do right, although I'm pretty sure that I am the problem because I'm not good at hex editing, maybe someone could help. Thanks!
Either you are not following the Hex editing instructions correctly or you're messing up the .ini file ... quite likely, it's the 2nd possibility.
Anyway, try my tool G3T. (Link in signature) #Pro_Self_Advertising
I got it to work... long post, check it in "View Original Post".
i did this correctly i even did not mess up .ini and with the game editor i can open the rom but the list of new attacks are not shown up plz help.
i m sry for problem i re did the hex part i followed him till last hex edit thing i just did not follow his ini editing tech i used g3t and just changed the number of moves to 511 and i got it ty itman this is my first ever use of hex i m new though.ty bro
i m sry to bother u again but one thing i forgot to do was check when i did it said my pkmn use a normal move rather then saying it used scratch i made the pointer oo i matched the whoe thing twicw but still the same problem help.