Have any of these been fixed in 1.5a or not? The changelog indicates the Day Care bug has been fixed, but what about the others? Are the offsets still correct? I'm hesitant to poke at anything just yet.FIXES:
Natural Cure - https://www.pokecommunity.com/posts/8725477/
Day Care - https://www.pokecommunity.com/posts/8917677/
Sand Force - Place 06 at 0x890CAB4
Hi, When I try to use Pokemon Game Editor PGE 3.7 with this, using the new 3.6 ini that gamer2020 posted (as there isnt a new one for 3.7 i don't think) I get an error in the errors.txt: Error! CryTable2 is missing for ROM BPRE!
Checking the ini I find CryTable=48C914
but no CryTable2 entry. Can anyone tell me the hex for this so I can add it?
Edit: If I make the seemingly dirty quick fix of just saying CryTable2=48C914 also, I then get another error: Error! DexSizeTrainerSprite is missing for ROM BPRE!
I can only assume there are a bunch of errors waiting to be detected, and that I have done something basic completely wrong. What am I doing wrong?
Open your roms.ini (PGE)
Go to [BPRE] section
Check at the bottom and copy whatever you need to your MrDollSteak ini (from TradeData in my case)
Brilliant thank you.
I have fixed the problems with the PGE pokemon editor but I get an error still with the PGE trade editor: InvalidArgument-Value of '0' is not valid for 'SelectedIndex'
Parameter name: SelectedIndex
Can't find any .ini entries called SelectedIndex so I don't know what to do here. Does the trade editor just not work for this rombase?
Use the attached ini. Also take in count this:
https://www.pokecommunity.com/posts/9213057/
Use the attached ini. Also take in count this:
https://www.pokecommunity.com/posts/9213057/
seeing i have problems with various tools with this patch i plan to use your advice, but i dont fully understand what gamer2020 meant in the link you send
could you by any chance explain in a bit more dept for me?
I applied the patch to a clean Fire Red Rom, and replaced the .ini file in G3HS with the one provided. When I try to open the rom in G3HS though it works fine at first, but when I load up a Pokemon I get this error message:
"Moves have not been fully loaded because there was an error. Either not enough moves were loaded due to a bad number in the ini or the learned move data offset is bad/corrupted. The error occurred trying to read move #x(changes with each pokemon). The correct number of moves is: 354."
After you replace the ini file in G3HS open the ini file find [MrDS] and change that to [0000] and it should work fine.
^That's also for everyone else who wants to use G3HS on the rombase.