Script Help Thread (DO NOT REQUEST SCRIPTS)

[forestw785]

sorry, I'm a little impatient because this is a big issue for me right now. I just thought I would bump my problem.

If using vba then just press shift and f1 to save your game, and then whenever you want to reload your savestate just press f1.

wrong section, btw. Both our posts will probably be deleted.

 

[icychill66]

hmm, but doesn't that just save that certain game? If I make changes, they won't be in effect if I load that state. Which section does it belong in?

 

[Denali]

Both of you might have the same problem.
@Denali : You probably mistaken setflag (set the flag) command with clearflag (it clears = delete it, the flag).

I did use clearflag though. I used clearflag 0x200, then I used setflag 0x828 to set the Pokemon menu. Should I put them in a different order or something?

 

[BlitŻ1]

hmm, but doesn't that just save that certain game? If I make changes, they won't be in effect if I load that state. Which section does it belong in?

Actually, vba loads the .sav when you click on the pokemon start menu, but vba will load its own created .sgm, which has different properties and will respond to any changes you did.

 

[forestw785]

I'm trying to hide this sprite of a Pokedex, but it's not disappearing.. Am I placing the hidesprite command at the wrong place or something?

All my starter pokeballs disappear for good when I script them in a similar way, but what is off?

Spoiler:

#Dynamic 0x800000

#org @start
lock
faceplayer
checkflag 0x829
if 0x0 goto @status
msgbox @say 0x6
release
end

#org @status
msgbox @message 0x6
hidesprite 0x13
fadescreen 0x1
fadescreen 0x0
fanfare 0x13E
setflag 0x829
special 0x16F
waitfanfare
release
end

#org @say
= How's that netbook coming?

#org @message
= Hey, do you want this journal?\nIt's 100% electronic, and I hate it.\lI was given it to beta test,\land I can't figure it out\lfor the life of me.\lI'm just going to say I "lost" it.\lYou can have it.\lHere you go!

 

[Hiche..]

I'm trying to hide this sprite of a Pokedex, but it's not disappearing.. Am I placing the hidesprite command at the wrong place or something?

All my starter pokeballs disappear for good when I script them in a similar way, but what is off?

Spoiler:

#Dynamic 0x800000

#org @start
lock
faceplayer
checkflag 0x829
if 0x0 goto @status
msgbox @say 0x6
release
end

#org @status
msgbox @message 0x6
hidesprite 0x13
fadescreen 0x1
fadescreen 0x0
fanfare 0x13E
setflag 0x829
special 0x16F
waitfanfare
release
end

#org @say
= How's that netbook coming?

#org @message
= Hey, do you want this journal?\nIt's 100% electronic, and I hate it.\lI was given it to beta test,\land I can't figure it out\lfor the life of me.\lI'm just going to say I "lost" it.\lYou can have it.\lHere you go!

When you set a flag, you should put the flag in the people ID of the person. In your case, the PokeDex. To do so, in Advance Map, press on the PokeDex you want to disappear and scroll to the people ID. Change it from 0000 to 0829 (setflag 0x829).
Also, hidesprite 0x13..are you sure you changed the PokeDex number from decimal to hex? Like, 10 in decimal is A in hex.

 

[KotovSyndrome_]

Sorry for posting so much XD

but I've got another problem...
This is a mom style script, everything works perfectly, except the running shoes don't active...
I'm using XSE & Firered.

Spoiler:

#dynamic 0x800000

#org @main
lock
faceplayer
checkflag 0x1253
if 0x1 goto @done
msgbox @1 0x2
msgbox @2 0x2
clearflag 0x82F
waitfanfare
closeonkeypress
msgbox @3 0x2
setflag 0x1253
release
end

#org @1
= Good morning, [player]!\pI think Professor Burdock was\nlooking for you, but before you\lgo, here are your running shoes.

#org @2
= [black_fr][player] recieved the Running Shoes!

#org @3
= Now, go and see the Professor!

#org @done
msgbox @nans 0x2
release
end

#org @nans
= Come back whenever you feel like\nit!

 

[0m3GA ARS3NAL]

Sorry for posting so much XD

but I've got another problem...
This is a mom style script, everything works perfectly, except the running shoes don't active...
I'm using XSE & Firered.

Spoiler:

#dynamic 0x800000

#org @main
lock
faceplayer
checkflag 0x1253
if 0x1 goto @done
msgbox @1 0x2
msgbox @2 0x2
setflag 0x82F
waitfanfare
closeonkeypress
msgbox @3 0x2
setflag 0x1253
release
end

#org @1
= Good morning, [player]!\pI think Professor Burdock was\nlooking for you, but before you\lgo, here are your running shoes.

#org @2
= [black_fr][player] recieved the Running Shoes!

#org @3
= Now, go and see the Professor!

#org @done
msgbox @nans 0x2
release
end

#org @nans
= Come back whenever you feel like\nit!

You got the clearflag and setflag commands mixed up on this one, changes are in BOLD RED

 

[forestw785]

When you set a flag, you should put the flag in the people ID of the person. In your case, the PokeDex. To do so, in Advance Map, press on the PokeDex you want to disappear and scroll to the people ID. Change it from 0000 to 0829 (setflag 0x829).
Also, hidesprite 0x13..are you sure you changed the PokeDex number from decimal to hex? Like, 10 in decimal is A in hex.

You, sir, are amazing. Thank you so much haha. I forgot to change that to hex! I knew to do that!! I just forgot to do it ha ha. Thank you for pointing that out to me.

But now I have this strange problem... Whenever I enable to Pokedex and the Pokemon menu they work fine, but if I open them immediately after setting their flags my character switches to Oak, and changes his sprite to mine, but with a messed up pallet.

wth?



Nevermind. I guess it was just a glitched up sprite, I deleted and replaced it. Damn AdvanceMap.... this latest version is giving me more bugs than the old one did.

 

[icychill66]

Now, sadly, there is another issue I'm dealing with. When I use the "removesprite" command with pokescript, the sprite doesn't immediately vanish. It only vanishes when I walk to another map. Here is an example of my script:

#org $yes
message $yes2
$yes2 1 = Took the WATER STONE.
boxset 6
giveitem 0x61 0x01
release
removesprite 5
setflag 0x1201
setflag 0x1204
release
end

I set the sprite's "person event" is 5.
I set the sprite's "person id" is set to 1201.

I'm not sure what I'm doing wrong, because I have literally copied other people's code that I know works, but it never works

 

[forestw785]

Now, sadly, there is another issue I'm dealing with. When I use the "removesprite" command with pokescript, the sprite doesn't immediately vanish. It only vanishes when I walk to another map. Here is an example of my script:

#org $yes
message $yes2
$yes2 1 = Took the WATER STONE.
boxset 6
giveitem 0x61 0x01
release
removesprite 5
setflag 0x1201
setflag 0x1204
release
end

I set the sprite's "person event" is 5.
I set the sprite's "person id" is set to 1201.

I'm not sure what I'm doing wrong, because I have literally copied other people's code that I know works, but it never works

you shouldn't be using pokescript. pokescript is really buggy to begin with. I'll convert that to xse as best as I can. I would do more, but I don't know all that you're trying to do, so I'll write my own script that gives a water stone.

Conversion:

Spoiler:

#org @yes //in xse @ is used instead of $, because @ makes more sense
lock
faceplayer
msgbox @yes2 0x6 //don't have to put boxset anymore. you just put it after the msgbox
giveitem 0x61 0x01 MSG_OBTAIN
hidesprite 0x05 //you have to put the hidesprite number in hex form. xse comes with a dec to hex converter
setflag 0x1201
setflag 0x1204
release
end

#org @yes2
= Took the WATER STONE.

Mine:

Spoiler:

#dynamic 800000 // this is the best part of xse, it doesn't make you look for an offset. it chooses the first offset it finds that is free after the number you provide.

#org @start
lock // makes the player and npc stop moving
faceplayer // makes the player and npc face eachother
checkflag 0x1201
if 0x0 goto @give // if 0x0 means if the flag isn't set it'll go to @give
if 0x1 goto @say // if 0x1 means if it is, then it'll go to @say
release // releases the player and npc from lock.
end

#org @give
giveitem 0x61 0x01 MSG_OBTAIN // 0x(item#) 0x(itemamount) type of transfer, MSG_FIND (found) or MSG_OBTAIN(given)
setflag 0x1201 // if the flag wasn't set, then it is after this
hidesprite 0x05 // hidesprite is the command to make the sprite disappear, and you put the person number in the hex converted form, and make sure the person id is set to the flag or close to it in some cases.
msgbox @stone 0x06 // This sends the scripts path towards @stone
release
end

#org @say
msgbox @speak 0x06 //again, sent to @speak, and the command boxset 6 isn't needed, just 0x06 or 0x05 and so forth
release
end

#org @speak
= I already gave you a stone./nHope your Pokémon evolved!

#org @stone
= Took the WATER STONE.

 

[icychill66]

haha ok. Thanks, I'll try to start using xse because it seems to be what most people are using.

 

[forestw785]

Hey I'm trying to make a script where you can't leave the level until you set off this flag (250), which I'm using as my starter pokemon script, but everytime I test it out the game freezes. Even if I delete and change the sprite.

I can apply the script to a person and when I talk to him, he moves me and talks, but I want it to set off when I walk onto a square.

 

[KotovSyndrome_]

You got the clearflag and setflag commands mixed up on this one, changes are in BOLD RED

For some reason it still doesn't work..
Could it be something to do with my maps or something?

 

[forestw785]

For some reason it still doesn't work..
Could it be something to do with my maps or something?

Well, I rewrote your script a little, and it works just fine on my end. It increased in length, but I think it didn't work because either you had a glitched sprite or because you were confusing a few commands up like clear and check flag.

Here's my script, but I didn't set it up to use your @2 and @3 text, you can do that:

Spoiler:

#dynamic 0x800000

#org @main
lock
faceplayer
checkflag 0x82F
if 0x0 goto @msg
if 0x1 goto @done
release
end

#org @msg
checkflag 0x1253
if 0x0 goto @give

#org @give
msgbox @1 0x6
fanfare 0x13E
setflag 0x82F
setflag 0x1253
waitfanfare
release
end

#org @1
= Good morning, [player]!\pI think Professor Burdock was\nlooking for you, but before you\lgo, here are your running shoes.

#org @2
= [black_fr][player] recieved the Running Shoes!

#org @3
= Now, go and see the Professor!

#org @done
msgbox @nans 0x2
release
end

#org @nans
= Come back whenever you feel like\nit!

 

[metapod23]

For some reason it still doesn't work..
Could it be something to do with my maps or something?

It could be the map, especially if it's Pallet Town. The running shoes don't work there unless you change the "Show name on entering" section in the Header from "Show village names" to something else.

 

[HackMew]

It could be the map, especially if it's Pallet Town. The running shoes don't work there unless you change the "Show name on entering" section in the Header from "Show village names" to something else.

Before messing around with the header, I would rather make sure the flag is being set properly first.

 

[Denali]

Okay I'm having trouble with flags. I set a flag, then I clear it in a different script but it won't work. Then I set another flag and place the flag number in the person event ID. (This is a script where you can't leave the room until you pick up a poke ball from a table).

Here's the script taking the poke ball.

#dynamic 0x8003C3
#org @newgrowls
checkflag 0x901
if 0x1 goto @done
lock
faceplayer
msgbox @1 0x6
givepokemon 58 0x5 0x0 0x0 0x0 0x0
setflag 0x828
setflag 0x3000
release
end
#org @done
clearflag 0x900
release
end
#org @1
= Let's go Growly....\nTime to visit Professor Oak.

This script prevents you from leaving the room.

#dynamic 0x800309
#org @mover
setflag 0x900
applymovement 0xFF @move
waitmovement 0x0
msgbox @1 0x6
applymovement 0xFF @move2
waitmovement 0x0
release
end
#org @move
#raw 0x62
#raw 0xFE
#org @move2
#raw 0x10
#raw 0xFE
#org @1
= Woops! Probably should bring\nGrowly along....

Can someone please tell me what I'm doing wrong and what I should do?

 

[Team Rocket's Raichu]

It just freezes the game when I step on the spot.

Game: Firered
Type: Rival
Editor: PKSV-UI by Score_Under
Script:

Spoiler:

#dynamic 0x71A36C

#org @main
clearflag 0x1367
showsprite 0x3
applymovement 0xFF @move
waitmovement 0x0
applymovement 0x4F @move2
waitmovement 0x0
goto @start
setflag 0x1367
hidesprite 0x3
release
end

#org @move
m run_down run_down run_down look_left look_up look_right look_down say_! walk_down walk_down end

#org @move2
m say_:) run_up run_up run_up look_left look_right say_? walk_left_slow walk_left_slow walk_left_slow walk_left_slow run_up run_up end

#org @start
trainerbattle 0x0 0x0D9 0x0 @intro @defeat
msgbox @over 0x2
end

#org @intro
= Oh, you there! What's your name?\pOh, it's [player].\pNice to meet you! My name is\nCHRIS. I'm going to be a POKéMON\lMaster!\pWHAT!?! YOU DON'T THINK I CAN DO\nIT!?! I'LL PROVE YOU WRONG!!!

#org @defeat
= I guess you are kind of good.

#org @over
= I guess I'll be seeing you around,\nbut let me tell you something!\pI won't lose to you next time! See\nya later, [player]!

If you can't help me with this script editor could you give it to me in XSE mode.

 

[Denali]

It just freezes the game when I step on the spot.

Game: Firered
Type: Rival
Editor: PKSV-UI by Score_Under
Script:

Spoiler:

#dynamic 0x71A36C

#org @main
clearflag 0x1367
showsprite 0x3
applymovement 0xFF @move
waitmovement 0x0
applymovement 0x4F @move2
waitmovement 0x0
goto @start
setflag 0x1367
hidesprite 0x3
release
end

#org @move
m run_down run_down run_down look_left look_up look_right look_down say_! walk_down walk_down end

#org @move2
m say_:) run_up run_up run_up look_left look_right say_? walk_left_slow walk_left_slow walk_left_slow walk_left_slow run_up run_up end

#org @start
trainerbattle 0x0 0x0D9 0x0 @intro @defeat
msgbox @over 0x2
end

#org @intro
= Oh, you there! What's your name?\pOh, it's [player].\pNice to meet you! My name is\nCHRIS. I'm going to be a POKéMON\lMaster!\pWHAT!?! YOU DON'T THINK I CAN DO\nIT!?! I'LL PROVE YOU WRONG!!!

#org @defeat
= I guess you are kind of good.

#org @over
= I guess I'll be seeing you around,\nbut let me tell you something!\pI won't lose to you next time! See\nya later, [player]!

If you can't help me with this script editor could you give it to me in XSE mode.

Did you put "0300" for the unknown and "4050" for the var number in advanced map?