Script Requests/Sharing/Discussion

Irish Witch · Mar 20, 2007

lukenetty said:
Meh, they don't work, can someone please show an correct example of a wild battle script? It's voor PokeScript.

You can modify the 'simple tutorial' script for the basics. Replace the givepokemon command with

wildbattle <pokemon> <level> <object>

The pokemon number are the same as givepokemon. I think I posted them in the tut

Monkey said:

I've replaced the ... with descriptors in the above quote and added a command so the applymove works properly. The values have to be read from the map you're referring to in advanced map.

ie(Fictional values):
map 7(bank).3(map) has a warp with the warp no 7.
and if your applying your movement to the main character use the value FF.
If not get the sprite no from the map where your placing your script.

the values for #RAW movement data are posted earlier in this thread.

rpgdude said:
How would I make so a guy won't let you in a cave unless you have a Groudon. I am using PokeScript
Thanks in advance

Check my tutorial for usage in flags and displaying text. Then put a 'script' event in front of the door to the cave (or even the guy himself). Set the guy or scripts 'flag value' to the flag you set in your script!

Quil · Mar 20, 2007

Code:

'-----------------------
#org 0x9D0000
checkflag 0x9E2
if 0x1 call 0x9D0900
checkflag 0x9D3
if 0x1 call 0x9D0800
checkflag 0x9D1
if 0x1 goto 0x9D0B00
msgbox 0x89D0100 '"DWARF:So...\nYou wan..."
callstd 0x5
compare LASTRESULT 0x1
if 0x1 call 0x9D0200
msgbox 0x89D0300 '"DWARF:NO?! N00b...."
release
end

'-----------------------
#org 0x9D0900
msgbox 0x89D0A00 '"DWARF:Isn't the unde..."
callstd 0x2
release
end

'-----------------------
#org 0x9D0800
setflag 0x9E2
msgbox 0x89D0700 '"DWARF: You gave him ..."
callstd 0x2
release
end

'-----------------------
#org 0x9D0200
setflag 0x9D1
msgbox 0x89D0400 '"DWARF:But you don't ..."
callstd 0x2
release
end

#org 0x9D0B00
message 0x9D0C00
boxset 0x2
end

'---------
' Strings
'---------
#org 0x9D0100
= DWARF:So...\nYou wanna use my underground?
#org 0x9D0300
= DWARF:NO?! N00b.
#org 0x9D0A00
= DWARF:Isn't the underground easy to use?
#org 0x9D0700
= DWARF:You gave him the Lobster? Good.\nYou can use my Underground
#org 0x9D0400
= DWARF:But you don't use it before you\nhave earned the rights.\pGive a Fisher this...\p\c\h01Á\v\h01 Obianted a Lobster.\p\v\h01 Put it in the Quest Pocket.
#org 0x9D0C00
= DWARF:Already gave it to him?

Code:

'-----------------------
#org 0x9D1000
checkflag 0x9D3
if 0x1 call 0x9D1500
checkflag 0x9D1
if 0x1 call 0x9D1200
msgbox 0x89D1300 '"FISHER:I need a Lobs..."
callstd 0x2
end

'-----------------------
#org 0x9D1500
msgbox 0x89D1600 '"FISHER:Thanks again!..."
callstd 0x2
end

'-----------------------
#org 0x9D1200
setflag 0x9D2
msgbox 0x89D1400 '"FISHER:You got a Lob..."
callstd 0x2
end

#org 0x9D1300
= FISHER:I need a Lobster!\nAww...\pWithout we can't live!
#org 0x9D1600
= FISHER:Thanks again!
#org 0x9D1400
= FISHER:You got a Lobster?!\p\c\h01Á\v\h01 Give the Lobster to the Fisher.\pYeah,Thanks

This scripts i made, the first is form a DWARF that give you a quest, and de next one form the Fisher in the quest.
But, the fisher only says:
"FISHER:I need a Lobster!
Aww...

Without we can't live!"

What's wrong? (I think a fault flag...)

pokemon1412 · Mar 21, 2007

Here the wildbattle pokemon code:

Code:

#org 0xA00000
checkflag 0x1412
if 0x1 goto 0xA00100
#raw 0xC5
setvar 0x8004 0x????  <=== Pokemon Species
setvar 0x8005 0x??     <=== Pokemon Level
setvar 0x8006 0x????  <=== Item held
special 0x1E2
setflag 0x8C1
special 0x139      <=== For Emerald are 0x139, 0x13A, 0x13B
playsound 0x???? <=== Battle Music
#raw 0x27
clearflag 0x8C1
setflag 0x1412        <=== Your Flag
end

#org 0xA00100
end

Monkey · Mar 21, 2007

is it possible to make a pokemart script with 15 items? for pokescript so yes could some1 make it for me or give a start for it so i can try figure it out my own?

Nitsuj99 · Mar 22, 2007

Is it possible, through timed scripts to change the palette when it gets to be a certain time or change the weather to bit dark when it reaches a certain time. for example it will get dark at 6:00 pm and light again at 6:00 am?

pichu2000 · Mar 22, 2007

I have a problem
1 I make a script .
2 I do Compile with SCripted
3 The program adds new script in the rom(I don't understand because Amap don't add the offset which go from $1000000, also if I added new bytes at the Rom with an Hex Editor)
4 I do a person with the new offset in Amap.
5 I save and when I open the rom the script doesn't work!!!!!!(Sometimes the image crasch)

Why this problem??

zel 2.0 · Mar 22, 2007

lightbayleef said:
This scripts i made, the first is form a DWARF that give you a quest, and de next one form the Fisher in the quest.
But, the fisher only says:
"FISHER:I need a Lobster!
Aww...

Without we can't live!"

What's wrong? (I think a fault flag...)

As you say, it may be caused by the flags. I just see one problem in the script. At #org 0x9D1200, it says "setflag 0x9D2". I think it should be "setflag 0x9D3", it seems 9D3 is the "Lobster given to fisher" flag.

I'm not too sure about using if 0x1 call 0x... When the dwarf gives you the yes/no choice, if you pick "yes", does he say his "DWARF:But you don't use it before you\nhave earned the rights..." stuff?, we need to know if that happens (if it happened, then the flag should be on)

Anyway, I just use if 0x jump 0x , I don't know if that could fix anything. It's really weird your case...

Monkey said:
is it possible to make a pokemart script with 15 items? for pokescript so yes could some1 make it for me or give a start for it so i can try figure it out my own?

Hmmm... I don't know about pokescript, but this is how I make my own custom pokemarts, without the need of editing an existing one.

#org 0xSomewhere
lock
faceplayer
#raw 0x67
writebytetooffset 0x62 0x8666081A
pokemart 0xListOfSoldItems
release
end

#org 0xListOfSoldItems
#binary hexItem1 hexItem1 hexItem2 hexItem2 ... hexLastItem hexLastItem 0 0

The hex items are are like: TM01 = 0x121 = 0x01 0x21, then we just reverse the order 0x21 0x01 and that's what goes into the list in this order. The last two "0" are a must.

Obviously, explanations for Scripted (don't know how Irish Witch implemented her pokemart command), and most likely just for FR (don't know if it could work on other versions...), and the list of hex values for items, well, I just have the FR one, maybe it's the same for the other games. If anyone wants it, I could post it later.

pichu2000 said:
I have a problem
1 I make a script .
2 I do Compile with SCripted
3 The program adds new script in the rom(I don't understand because Amap don't add the offset which go from $1000000, also if I added new bytes at the Rom with an Hex Editor)
4 I do a person with the new offset in Amap.
5 I save and when I open the rom the script doesn't work!!!!!!(Sometimes the image crasch)

Why this problem??

Well, first of all, unless you expanded the rom (don't ask me about that, it seems you've been trying to do that, but I don't know...), you can normally only use up to offset 0xFFFFFF, so you can't put anything bigger (it'll just make the game crash)

So, as long as you use free offsets in the normal space of the rom, you should be fine, since you'd be able to put it in Advance Map (I didn't know Advance Map didn't admit offsets bigger than FFFFFF, though)

Hyunbin · Mar 22, 2007

can someone tell me what i did wrong in this script

Code:

<---
CELEBI SCRIPT (WINDING FOREST)
needed: TIME ORB
--->

#org 0x800000
lock
faceplayer
checkitem 0x113
checkflag 0x200
compare LASTRESULT 0x1
if 0x0 goto 0x800100
message 0x800300
boxset 5
compare LASTRESULT 0x1
if 0x1 goto 0x800500
release
end

#org 0x800100
message 0x800200
boxset 6
release
end

#org 0x800400
message 0x800500
boxset 0x6
goto 0x800600
release
end

#org 0x800600
message 0x800700
boxset 0x6
cry PKMN_CELEBI
wildbattle 0xFB 0x30 0x0
release
setflag 0x200
end

#org 0x800200
= What an eerie tree...

#org 0x800300
= Place the TIME ORB here?

#org 0x800500
= Placed the TIME ORB under the tree.

#org 0x800700
= BIIIIIII!!!

Monkey · Mar 23, 2007

zel said:
Hmmm... I don't know about pokescript, but this is how I make my own custom pokemarts, without the need of editing an existing one.

#org 0xSomewhere
lock
faceplayer
#raw 0x67
writebytetooffset 0x62 0x8666081A
pokemart 0xListOfSoldItems
release
end

#org 0xListOfSoldItems
#binary hexItem1 hexItem1 hexItem2 hexItem2 ... hexLastItem hexLastItem 0 0

The hex items are are like: TM01 = 0x121 = 0x01 0x21, then we just reverse the order 0x21 0x01 and that's what goes into the list in this order. The last two "0" are a must.

Obviously, explanations for Scripted (don't know how Irish Witch implemented her pokemart command), and most likely just for FR (don't know if it could work on other versions...), and the list of hex values for items, well, I just have the FR one, maybe it's the same for the other games. If anyone wants it, I could post it later.

k ty then i will try with scripted even i dont know how it works

foofatron · Mar 23, 2007

Can someone make a script that a guy walks up to you from 6 spaces away and and before he talks to you the waether changes to the dark one and then he says (This was caused by the evil pokemon.You must stop it!)This is for RUBY !

frank$or · Mar 23, 2007

I've searched free space with an hex-editor, and compiled this script:

Code:

#org 0x9C8020
checkflag 0x12C
applymovement 0xFF 0x9C8030
pause 0x10
applymovement 0x1 0x9C8040
pause 0x60
trainerbattle 0x0 0x160 0x0 0x9C8050 0x9C8060
message 0x9C8070
boxset 0x2
#raw 0x5C
applymovement 0x1 0x9C8080
pause 0x70
setflag 0x12C
end

#org 0x9C8030
#raw 0x62
#raw 0xFE

#org 0x9C8040
#raw 0x1D
#raw 0x1D
#raw 0x1D
#raw 0x1D
#raw 0x1D
#raw 0xFE

#org 0x9C8050
= Get lost kid!

#org 0x9C8060
= What!

#org 0x9C8070
= I have to tell this!

#org 0x9C8080
#raw 0x62
#raw 0x1E
#raw 0x1E
#raw 0x1E
#raw 0x1E
#raw 0x1E
#raw 0x1E
#raw 0xFE

It doesn't work though, you only will see '!' from the player and then the script ends.

Irish Witch · Mar 24, 2007

I managed to grab a computer for a few minutes so I'll answer this question:

Zel said:
Hmmm... I don't know about pokescript, but this is how I make my own custom pokemarts, without the need of editing an existing one.

#org 0xListOfSoldItems
#binary hexItem1 hexItem1 hexItem2 hexItem2 ... hexLastItem hexLastItem 0 0

The hex items are are like: TM01 = 0x121 = 0x01 0x21, then we just reverse the order 0x21 0x01 and that's what goes into the list in this order. The last two "0" are a must.

Pokescript is FULLY compatible with Scripted... FULLY
A script written for scripted will work in pokescript, all you do when the compiled project opens in bufrite is go straight to 'burn'. I haven't changed the language at all... (EDIT, well. Actually I have ADDED a couple of commands, but the existing ones all work the same way!)

That said what I am about to say works in scripted too.
You do NOT need to break the numbers for your items up.. if you want to write intiger values in a #Binary command simply do this:

Code:

#binary [B]int[/B] 0x121 0x80 0x58 [I]0x00[/I]

last 0x0 is the 0 0 to finalise as per Zels instructions.

It was programmed into the #Binary and #Raw commands in scripted (and so in pokescript) to accept the following keywords.

b , byte , char == byte ie: 0x01
i , int , word == int ie 0x0120
l , long , dword == dword ie 0x00800000
p , ptr , pointer == Actually the same as Dword!

Use any of these and all values after that word (within the binary statement) will be treeted as that type until another keyword is used!
How do I know this; Easy. I've seen the source code!:cheeky:

frank$or said:
I've searched free space with an hex-editor, and compiled this script:

Code:

.....

It doesn't work though, you only will see '!' from the player and then the script ends.

I can tell you right now, your offsetts are too close together. They're overwriting each other. Either make the spaces bigger or use pokescript and let bufrite re-assign the offsets (the book button) so they don't overlap!

EDIT

Also: what is your checkflag for... You have to follow it with an if statement for it to mean anything.

#raw 0x5c is the bytecode for trainerbattle. put it before that command not before the applymovement.... (if you were using pokescript that command would work properly without having to write the raw command)

and for christ sake.. Will people stop using PAUSE to wait for movement scripts. None of you are getting the timing right...
Use the command: pausemove 0
that will wait for all movement script to finish properly.

frank$or · Mar 24, 2007

I can tell you right now, your offsetts are too close together. They're overwriting each other. Either make the spaces bigger or use pokescript and let bufrite re-assign the offsets (the book button) so they don't overlap!

Also: what is your checkflag for... You have to follow it with an if statement for it to mean anything.

#raw 0x5c is the bytecode for trainerbattle. put it before that command not before the applymovement.... (if you were using pokescript that command would work properly without having to write the raw command)

and for christ sake.. Will people stop using PAUSE to wait for movement scripts. None of you are getting the timing right...
Use the command: pausemove 0
that will wait for all movement script to finish properly.

Yes, i saw that #raw 0x5C before. No thanks, i don't like pokéscript that much.
Btw, Pausemove isn't a command for Diamondcutter, so i cant use it.

Monkey · Mar 24, 2007

Irish Witch said:
I managed to grab a computer for a few minutes so I'll answer this question:

Pokescript is FULLY compatible with Scripted... FULLY
A script written for scripted will work in pokescript, all you do when the compiled project opens in bufrite is go straight to 'burn'. I haven't changed the language at all... (EDIT, well. Actually I have ADDED a couple of commands, but the existing ones all work the same way!)

That said what I am about to say works in scripted too.
You do NOT need to break the numbers for your items up.. if you want to write intiger values in a #Binary command simply do this:

Code:

#binary [B]int[/B] 0x121 0x80 0x58 [I]0x00[/I]

last 0x0 is the 0 0 to finalise as per Zels instructions.

It was programmed into the #Binary and #Raw commands in scripted (and so in pokescript) to accept the following keywords.

b , byte , char == byte ie: 0x01
i , int , word == int ie 0x0120
l , long , dword == dword ie 0x00800000
p , ptr , pointer == Actually the same as Dword!

Use any of these and all values after that word (within the binary statement) will be treeted as that type until another keyword is used!
How do I know this; Easy. I've seen the source code!:cheeky:

:paranoid: i dont understand that

so this need work for pokescript:(so yes, i get an error all time when i wanna compile it)

Code:

#org 0xSomewhere
lock
faceplayer
#raw 0x67
0x01 0x62 0x8666081A
pokemart 0xListOfSoldItems
release
end

#org 0xListOfSoldItems
#binary int 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0x13 0x14 0x17 0x00

foofatron · Mar 24, 2007

When I insertr this script I get this 1 - SEEK

#org 0x800000
message 0x800030
boxset 0x2
message 0x800055
boxset BOXSET_YESNO
compare LASTRESULT 1
if 1 0x800150
message 0x800100
boxset 0x2
break

#org 0x800150
message 0x800125
boxset 0x2
warp 0x00 0x12 0x01
break

#org 0x800030
= Hello, Can I help you?
#org 0x800055
= Wanna lift to Pineco Rocks?
#org 0x800100
= To bad, come again.
#org 0x800125
= Okay, let's go.

Cleaning up...
Closing file...
Finished processing stdpoke.rbh.
Processing xx.rbc...
File handle: 3
1 - SEEK
> pNewOffset = 800000
2 - (0F) MESSAGE (native)
> pText = 8800030
3 - (09) - BOXSET
> bByte = 2
4 - (0F) MESSAGE (native)
> pText = 8800055
5 - (09) - BOXSET
> bByte = 5
6 - (21) - COMPARE
> iWord = 800D
> iWord = 1
7 - (??) IF (native)
> bCondition = 1
No kind specified. Assuming call.
> pTarget = 8800150
8 - (0F) MESSAGE (native)
> pText = 8800100
9 - (09) - BOXSET
> bByte = 2
10 - (02) - END
12 - SEEK
> pNewOffset = 800150
13 - (0F) MESSAGE (native)
> pText = 8800125
14 - (09) - BOXSET
> bByte = 2
15 - (39) - WARP
> bByte = 0
> bByte = 12
> bByte = 1
16 - (02) - END
18 - SEEK
> pNewOffset = 800030
19 - RAW TEXT
> sOld = "Hello, Can I help you?"
> sNew = "ÂÙààã¸
Cleaning up...
Closing file...
Finished processing xx.rbc.

I'm using Ruby thats most of it.I compile it with Daimond cutter.

RinniP · Mar 25, 2007

Monkey said:
:paranoid: i dont understand that

so this need work for pokescript:(so yes, i get an error all time when i wanna compile it)

Code:

#org 0xSomewhere lock faceplayer #raw 0x67 0x01 0x62 0x8666081A pokemart 0xListOfSoldItems release end #org 0xListOfSoldItems #binary int 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0x13 0x14 0x17 0x00

Posting in the stead of my Aunt here..... plus english your second language is it??

Anyway... Get the update to fix a bug with the #Raw and #Binary commands...
Plus: I have put the directives page up again!

And from what I see above try the script like this:

#org $Somewhere
lock
faceplayer
#raw 0x67
writebytetooffset 0x62 0x8666081A
pokemart $ListOfSoldItems
release
end

#org $ListOfSoldItems
#binary int 0x1 0x2 0x3 0x4 0x5 0x6 0x7
#binary int 0x8 0x9 0xa 0xb 0xc 0x13 0x14 0x17 0x00

You were missing the word in bold.

EDIT - Missed an INT

Saken · Mar 25, 2007

When i try to compile this in ScriptEd it kinda doesnt work.
It says Runtime Error '6' Overflow
Can someone check if anything is wrong?

Spoiler:

foofatron · Mar 25, 2007

Your script is too big size it down.I'm not sure but I think it would still work if you took out this part #org 0x900800
message 0x900900
boxset 0x6
release
end

Monkey · Mar 25, 2007

RinniP said:
Posting in the stead of my Aunt here..... plus english your second language is it??

Anyway... Get the update to fix a bug with the #Raw and #Binary commands...
Plus: I have put the directives page up again!

And from what I see above try the script like this:

You were missing the word in bold.

yeah it works thnxs but now i hold the probleme 1. he doesnt pop up a menu bar for sell/buy/cancel and when i talk to the person it says all time Céccé etc and then he doesnt stop

RinniP · Mar 25, 2007

The Boss Giovanni said:
When i try to compile this in ScriptEd it kinda doesnt work.
It says Runtime Error '6' Overflow
Can someone check if anything is wrong?

#org 0x900100
= Heya \v\ho1 just up to my usual training.
#org 0x900200
= You up for a battle \v\h01?
#org 0x900600
= Ok here i come!
#org 0x900700
= I....lost?
#org 0x900500
= I cant beleive i lost to you!
#org 0x900900
= Ok just talk to me if you\nwant to battle.

Ok.. Even I can see what's whong with this. I know enough from retyping Aunts Documentation that that should be zero one, not oh one! (\h01 not \ho1)

Script Requests/Sharing/Discussion

More options

Irish Witch

Office Jenny

Quil

Me

pokemon1412

Monkey

Nitsuj99

pichu2000

zel 2.0

Gold Remaker

Hyunbin

w00t!~

Monkey

foofatron

Banned

frank$or

Irish Witch

Office Jenny

frank$or

Monkey

foofatron

Banned

RinniP

Saken

foofatron

Banned

Monkey

RinniP