Haku.
(FLAME)...H....A...K..U
- 385
- Posts
- 16
- Years
- Singapore :D
- Seen Jul 22, 2011
Xmouvelianx Tile Insertion Tutorial
*Do not copy this Tutorial and make it yours*
What you need
Advance-map
Graphics Gale
Photoshop/Paint
Tile that you want to insert
And most of all Patience
::STEPS::
Choose a tile that you want to put in..
I'll use 874521's indoor tiles.
PAINT/PHOTOSHOP steps::
Choose those you want to insert
Use those with the similar colours..
open up a new paint file and paste it in
After you're done you will get this some sort..
IMPORTANT..
Save it as a png file
Graphic Gale steps..
Open up your save photo
Click image->Count color used
Make sure it is 16 color or less!
EG.
if it's not.. just recolour the similar colours
close it on open it back in paint.
ADVANCE MAP TIME
Open up block editor and go to an empty pallete
click edit pallete/pallete editor
For the first color just use any color you like..
Eg:
Now go to paint and click the eyedropper tool.
left click the color of the block.[1 color at a time]
click colors-edit colors-define custom color
Copy down the Red,blue and green numbers
Now go back to your pallete form and insert the second color in.
EG.
After you have finish inserting the colors and insert the tiles into the tileset
it will look something like this
Now to paste those desired tiles into the tileset
save the tileset to where you'll find it easy to locate
Open up the desired tileset and copy the image
Next,Use graphic gale to open up the tileset.
Click 8x8 grid,for comfort to locate it i'll show you where
it will look like this
Next,Paste the image into the tileset
use the box tool located on the right side on the hand icon and box the first stairs,
and make it fit into the 8x8 box.
when you're done moving all of the image,it will look like this
save the tileset
Open up Advance-map again and load the edited tileset
When loaded,look for the inserted tiles and it will look something like this
*NOTE*some of you may have a different color for the background in some areas,simply color over it using the bg colour.
*Do not copy this Tutorial and make it yours*
What you need
Advance-map
Graphics Gale
Photoshop/Paint
Tile that you want to insert
And most of all Patience
::STEPS::
Choose a tile that you want to put in..
I'll use 874521's indoor tiles.
PAINT/PHOTOSHOP steps::
Choose those you want to insert
Use those with the similar colours..
open up a new paint file and paste it in
After you're done you will get this some sort..
IMPORTANT..
Save it as a png file
Graphic Gale steps..
Open up your save photo
Click image->Count color used
Make sure it is 16 color or less!
EG.
if it's not.. just recolour the similar colours
close it on open it back in paint.
ADVANCE MAP TIME
Open up block editor and go to an empty pallete
click edit pallete/pallete editor
For the first color just use any color you like..
Eg:
Now go to paint and click the eyedropper tool.
left click the color of the block.[1 color at a time]
click colors-edit colors-define custom color
Copy down the Red,blue and green numbers
Now go back to your pallete form and insert the second color in.
EG.
After you have finish inserting the colors and insert the tiles into the tileset
it will look something like this
Now to paste those desired tiles into the tileset
save the tileset to where you'll find it easy to locate
Open up the desired tileset and copy the image
Next,Use graphic gale to open up the tileset.
Click 8x8 grid,for comfort to locate it i'll show you where
it will look like this
Next,Paste the image into the tileset
use the box tool located on the right side on the hand icon and box the first stairs,
when you're done moving all of the image,it will look like this
save the tileset
Open up Advance-map again and load the edited tileset
When loaded,look for the inserted tiles and it will look something like this
*NOTE*some of you may have a different color for the background in some areas,simply color over it using the bg colour.
Last edited by a moderator:
