Check stats in battle

[RTCanwind]

Hail

 

[bo4p5687]

Hail

I used Hail and it shows like this.
It works but I will change to show name.
Something in your project stopped it

 

[bo4p5687]

* Update:
version 18: show name of battlefield

 

[RTCanwind]

Now it works,thanks.

 

[Dialga5330]

Nice script! I've been using it and I would like to know if there is an option to show all field information in one single page and showing it like the official games (Weather Duration: 3/8), or something like that!

 

[bo4p5687]

Nice script! I've been using it and I would like to know if there is an option to show all field information in one single page and showing it like the official games (Weather Duration: 3/8), or something like that!

Find in

def store_active

Change these lines

				show = 
				case @showactive[@active-1]
				when @activef then @showactive[@active-1]
				when @actives then @showactive[@active-1][@position%2]
				when @activep then @showactive[@active-1][@position]
				end

into

			show2 = []
			@showactive.each { |s|
				case s
				when @activef then show2 << s
				when @actives then show2 << s[@position%2]
				when @activep then show2 << s[@position]
				end
			}
			show = {}
			show2.flatten.each { |s| s.each { |k, v| show[k] = v } }

Then delete these lines

			title = 
				case @showactive[@active-1]
				when @activef then "Active field:"
				when @actives then "Active side:"
				when @activep then "Active position:"
				end
			active.unshift(title)

Find

def set_input

Change this line

					@active  = 0 if @active > @showactive.size

into

					@active  = 0 if @active > 1

If you want to add something like (Weather Duration: 3/8), find in file '4 - Battle.rb'.
You can see this line

ret["Weather duration"] = @field.weatherDuration if @field.weatherDuration != 0

Change this into

ret["Weather duration"] = "#{@field.weatherDuration}/8" if @field.weatherDuration != 0

 

[Dialga5330]

Thanks! Now all the information is on one page, but what I meant by "3/8" was actually whether there would be any way to get in version 18 the maximum number of turns of the effect (An example for rain would be: 5 normally, 8 with the Damp Rock).

 

[bo4p5687]

Thanks! Now all the information is on one page, but what I meant by "3/8" was actually whether there would be any way to get in version 18 the maximum number of turns of the effect (An example for rain would be: 5 normally, 8 with the Damp Rock).

Just add condition to change like

if @field.weatherDuration != 0
  if @field.weather == PBWeather::Rain
    max = 5
  elsif ....... (condition)
    max = ......
  end
  ret["Weather duration"] = "#{@field.weatherDuration}/#{max}"
end

Add condition when you want to change and set max equals value.

 

[RTCanwind]

It seems to have some issues in 3v1 battle like Max Raid Battle.

 

[bo4p5687]

It seems to have some issues in 3v1 battle like Max Raid Battle.

I just test in PE (raw) not test EBDX or ZUD. So, I don't know your issue.

 

[Dialga5330]

I've had those issues too in 3v1 battles if you press right and in 2v3 if you press left while showing stat changes. It gave me these two errors:

3v1:
[Pokémon Essentials version 18.1]
Exception: NoMethodError
Message: undefined method `size' for nil:NilClass

Backtrace:
1 - Set:52:in `set_active_size'
3 - Show:386:in `change_active'
3 - Show:288:in `set_input'
3 - Show:15:in `show'
3 - Show:7:in `loop'
3 - Show:16:in `show'
1 - Set:58:in `show'
5 - Scene battle:46:in `pbCommandMenuEx'
5 - Scene battle:9:in `loop'
5 - Scene battle:48:in `pbCommandMenuEx'

2v3
[Pokémon Essentials version 18.1]
Exception: NoMethodError
Message: undefined method `hp' for nil:NilClass

Backtrace:
3 - Show:81:in `draw_information'
3 - Show:13:in `show'
3 - Show:7:in `loop'
3 - Show:16:in `show'
1 - Set:58:in `show'
5 - Scene battle:46:in `pbCommandMenuEx'
5 - Scene battle:9:in `loop'
5 - Scene battle:48:in `pbCommandMenuEx'
Scene_Commands:15:in `pbCommandMenu'
Battle_Phase_Command:29:in `pbCommandMenu'

 

[bo4p5687]

I've had those issues too in 3v1 battles if you press right and in 2v3 if you press left while showing stat changes. It gave me these two errors:

Thanks for your report! I fixed it!

 

[Dialga5330]

Glad to hear it! I am editing the interface and would like to know if there is a way to separate the field information into two columns, one for the name and one for the effect itself.

 

[bo4p5687]

Glad to hear it! I am editing the interface and would like to know if there is a way to separate the field information into two columns, one for the name and one for the effect itself.

I set it like this because I want to split text if this line is too long. If you want to seperate, find

def store_active

And you can see this line

show.each { |k, v| active << "#{k}: #{v}" }

This is store name and effect in same line. Modify this def and find these lines in "def draw_information"

					active = store_active
					active.each_with_index { |atv, i|
						string = atv
						x = i == 0 ? 5 : 10
						y = 64 + 30 * i
						text << [string, x, y, 0, Color.new(0,0,0), Color.new(255,255,255)]
					}

These lines use function to draw information. Edit it.

 

[BluMasc]

Just realized, that this script "ignores" Illusion. If you fight a zorua it still displays as such wth the abbility illusion in your screen. Is there an easy fix for that?

 

[Skyflyer]

The link is broken, can you update It? Thanks in advice!