3rd Gen Code Request Thread

Status
Not open for further replies.
does anybody know if u can duplicate items or pokemon on ruby version?

(for g-baby) ^^;

Pokemon Palace Network is a link from Pokemon community. Scroll to the very top of the page in where the banner is, and you'll find the link to it. Click on it, and browse around that site for the codes.
 
does anybody know if u can duplicate items or pokemon on ruby version?
Click to expand...
Not really, but you can create them. You'll need a cheating device for both though. Just enter in codes for items and you'll get items.

For Pokemon, you can either enter in a modifier code so that every Pokemon you run into will be that Pokemon. Example: You enter in a modifier code for Mewtwo. Every Pokemon you run into until you PROPERLY turn the code off will be a Mewtwo.

Another way to get the Pokemon you want is through the Pokemon Calculator/Maker. But you should only use those if you have the AR, GSA, GSSP, or a cheating device that can connect to your PC since the codes it creates are very long. The Calc/Maker lets you create Pokemon down to the stats. You choose the Popkemon you want, edit it's stats, personality, name, IDs, gender, ribbons, conditions, shinyness, and so on.
 
there were for gsc versions but they took it out i think
 
umm guys... ive got visual boy advance... the things at the top are....
File, Options, Cheat, Help... under Cheat theres only ADD CHEAT, SEARCH FOR CHEATS, CHEAT LIST... AND GAMESHARK AND GAMEGENIE ARE unclickable... i dunno HOW you get gameshark for visualboy advance... and if i jus enter codes in the built in thing they dont work... help me please
 
Click on "Cheat List". I don't know which version of the VBA you're using, but I'm using 1.4 so I'm going by what it says and it doesn't have GameGenie (codebreaker?). Click on Gameshark and put in the code I gave you earlier. If it says something about an invalid format, connect the 2 sections of the code and try it again. It's meant for Action Replay, but the GSA and AR uses the same format and is made by the same
company so the code should still work just fine.

A12FCE77 0C1EC556
If the above code is an invalid format, change it to the one below. It's the same thing only without the space.
A12FCE770C1EC556
 
Bah! Do you know anything about codes?? I thought anyone who knows that codes exist would know about Master Codes. Here it is:

de00aafd 2ebd05d0
b4564efe 23f44bf2

And if it's an invalid format...

de00aafd2ebd05d0
b4564efe23f44bf2

And that (M) code is for Sapphire by the way. I'll edit this post to put the Ruby (M) code once I find it.

EDIT: Eh, that was fast. Here it is for Ruby.

DE00AAFD 2EBD05D0
530823D9 16558191
-or-
DE00AAFD2EBD05D0
530823D916558191
 
ok... sorry for being stupid but... what is THE MASTER CODE... i used to use gameshark and so on with pokemon blue and red but i got bored of it... now ive forgotten EVERYTHING

what do these do??? de00aafd 2ebd05d0
b4564efe 23f44bf2
 
That's the Sapphire master code. Make sure you're using the Sapphire rom (...come on...). If you're using the Ruby rom, use the Ruby Master Code, it's above in the post I posted above.
 
i did... im using the sapphire rom... NONE of the codes from code junkies seem to work... i tried both master codes.. what u do is

gameshark... put the master code... enable it.... put anothe code (the one for all badges).... its all done? didnt work
 
Eh...Imma take another whack at this then.

Here's a different master code for Sapphire.

a2e564fe0fb58a54
b4564efe23f44bf2

Now here are different "All Badges" codes. Enter them ALL SEPERATELY.

91BABA3AD4EA5B68
A65FE1A3ED512FCF
71C4689E821E3C2C
A12FCE770C1EC556 (this is the one I gave you earlier, it might work with the new master code)

And as far as I know, none of those are from Codejunkies.
 
ok ill try that in a few minutes... but does it have to be done in a certain way? or could you buy in the pokecentre and just put the master code, put the all badge code... press enable and ok... then go back to the game and look at your badges and theyll all be there?

ok none of them work.... can u PLEASE explain how they will work..? will the badges just show up?
 
Yes..they just show up out of thin air. You don't have to press the "Enable" button. As long as the boxes next to each code you've entered are checked, then the code is enabled. If they're not, the code won't work. All the codes work fine for me. *goes back to Lufia*
 
um... i downloaded version 1.4 ... theres no tick box... the tick box is the enable thing... ok... so here goes... this is what it should look like??

CODE

(tick) a2e564fe0fb58a54
(tick) (one of the codes)

press ok
 
umm... ok... i even downloaded another rom and i tried that... doesnt work... do u have msn or something? maybe u can send me exactly what ur using?
 
Here's what it should look like.

https://www.freewebs.com/chaospokedemon/untitled.png

And that isn't a Pokemon rom, but the code box should look like that if you're using VBA1.4. Make sure every box has been checked. Make sure every code is correct. Make sure the master code is for the correct game. Whatever. Make sure the codes really are working and that you didn't just overlook the pictures of badges in your trainer card thing. Make sure one of the other codes you were using (you are obviously using other codes as well if you have 5 Groudons) are correct as a simple incorrect digit can cause errors.

If all of that I just said doesn't work, get a new rom or start over.

And don't double post. Use the edit button.
 
um ok... i didnt even cheat and i got those groudons... im thinking its a glitch in the rom i got... that page cant be seen... (the one you gave me) .... and i even tried with ANOTHER rom... those codes dont work
 
oh god. u seriously need help. anyways what benefits u from cheating on a stupod ROM? jeez...just go buy the game.
 
This isn't the place to talk about the morality of roms. Do that somewhere else.

Get a new freaking rom and emulator then.

EDIT: Try getting a newer version of VBA. VBA 1.4 is out of date. I used to have a newer version but my anti-virus killed it off when I raised it's security stuff to "high". I couldn't find a newer version so I just used 1.4 which apparently...doesn't seem to support AR codes even though it's the same format. Hehehe...no need to kill me yet. Contact me on MSN for the newest VBA. And I think everything I just said about emulators was agaisnt the rules.
 
Last edited:
Status
Not open for further replies.
Back
Top