• Just a reminder that providing specifics on, sharing links to, or naming websites where ROMs can be accessed is against the rules. If your post has any of this information it will be removed.
  • Ever thought it'd be cool to have your art, writing, or challenge runs featured on PokéCommunity? Click here for info - we'd love to spotlight your work!
  • PokéCommunity's Easter Egg Hunt is now on! If you're interested in looking for some eggs and earning badges, click here!
  • Our weekly protagonist poll is now up! Vote for your favorite Conquest protagonist in the poll by clicking here.
  • Welcome to PokéCommunity! Register now and join one of the best fan communities on the 'net to talk Pokémon and more! We are not affiliated with The Pokémon Company or Nintendo.
    Register

Script Help Thread (DO NOT REQUEST SCRIPTS)

Status
Not open for further replies.
destinedjagold said:


Try this...
Code: 
#dynamic 0x800000  

#org @start 
lock 
faceplayer 
cry 0x6 0x0 
msgbox @1 0x6 
wildbattle 0x6 0x1E 0x8B 
hidesprite lasttalked
fadescreen 0x0 
setflag 0x200 
release 
end  

#org @1 
= CHARIZARD: Raaarrgghh!
Also, just for safety of your hack, use the flags 1000 and above. 200 isn't really a safe flag to use, at least, in Ruby...

Some proof that it works...
Spoiler:
Click to expand...

Thanks, but I forgot to say that it's for Pokémon FireRed...
When I do it with the program PokéTronic it works, but than I don't know how I must set the flags.
 
Last edited:
SKRoy said:
Thanks, but I forgot to say that it's for Pokémon FireRed...
Click to expand...
My signature has a link to a list of every flag in FireRed and what it's used for. If you remove all of the default Nintendo scripts for a particular flag, then that flag will be safe to use in your custom scripts.
 
Hello.

I'm having trouble with using "special 0x110" of XSE, which saves the hall of fame and plays the ending in FireRed.

Whenever my script ends, the PLAYER ends up in front of the Pokemon League Building, located in map bank 3, map 9 of Advance Map.

I've tried adding warp command in front of the special 0x110, but the game still sends the PLAYER to (3,9).

Any help is greatly appreciated.

Thanks.
 
DavidJCobb said:
My signature has a link to a list of every flag in FireRed and what it's used for. If you remove all of the default Nintendo scripts for a particular flag, then that flag will be safe to use in your custom scripts.
Click to expand...

Thanks, but I still don't know what's wrong with this script:

#dynamic 0x800000
#org @start
lock
faceplayer
msgbox @1 0x6
cry 0x6 0x0
wildbattle 0x6 0x1E 0x8B
fadescreen 0x1
fadescreen 0x0
hidesprite 0x800F
setflag 0x200
release
end

#org @1
= CHARIZARD: Raaarrgghh!

It's for Fire Red, but in XSE I got the error that Wildbattle 0x6 0x1E 0x8B is incorrect. Please help!
 
I'm having problems with a script that is supposed to not let you pass until speaking to professor oak. Unfortunately, it just freezes your sprite and you can't move.
Here goes:

#dyn 0x740000
#org @start
compare 0x8001
if == jump @pass
msgbox @talk
callstd MSG_LOCK
applymovement PLAYER @walk
pauseevent 0x0
end

#org @pass
end

#org @talk
= I should get a pokemon before\ngoing out there[.]

#org @walk
M walk_down end
 
Last edited:
Vladimir312 said:
I'm having problems with a script that is supposed to not let you pass until speaking to professor oak. Unfortunately, it just freezes your sprite and you can't move.
Here goes:

#dyn 0x740000
#org @start
compare 0x8001
if == jump @pass
msgbox @talk
callstd MSG_LOCK
applymovement PLAYER @walk
pauseevent 0x0
end

#org @pass
end

#org @talk
= I should get a pokemon before\ngoing out there[.]

#org @walk
M walk_down end
Click to expand...

Are you using PKSV? If that's the case, then I'll be able to help. Replace "compare" with "checkflag." So your script now looks likes this:

Spoiler:


Dunno if it's the same with XSE.
 
Roboto-kun said:
Are you using PKSV? If that's the case, then I'll be able to help. Replace "compare" with "checkflag." So your script now looks likes this:

Spoiler:


Dunno if it's the same with XSE.
Click to expand...
I can say for sure it is not same as XSE's style since XSE does not use "==" ;)
 
Hello, I'm having minor difficulties with a "special/healing pokemon" script. Everything works fine, it's just that the nurse doesn't put an actual "pokeball" on the healing machine. Thanks, if anyone could assist me.

Code: 
#dynamic 0x800000

#org @start
lock
faceplayer
msgbox @10 0x5
applymovement 0x1 @nursing
pause 0x35
fadescreen 0x1
fanfare 0x100
special 0x0
waitfanfare
fadescreen 0x0
applymovement 0x1 @done
closeonkeypress
msgbox @11 0x6
release
end

#org @nursing
#raw 0x3
#raw 0x13
#raw 0x2E
#raw 0x2E
#raw 0x12 
#raw 0x2
#raw 0xFE

#org @done
#raw 0x2
#raw 0x4
#raw 0xFE

#org @10
= What wonderful Pokèmon you\nhave there!\pThey look like\nthey could use a long rest.

#org @11
= Now they look better!\nDon't forget to visit!
 
WHISBII, you're missing these commands (supposing they apply to every 'healing machine' tile):

Code: 
doanimation 0x19
checkanimation 0x19
I assume you would add them after the @nursing move ends. Also, wouldn't it be better if you used a waitmovement 0x0 instead of a pause?
 
Truality said:
WHISBII, you're missing these commands (supposing they apply to every 'healing machine' tile):

Code: 
doanimation 0x19
checkanimation 0x19
I assume you would add them after the @nursing move ends. Also, wouldn't it be better if you used a waitmovement 0x0 instead of a pause?
Click to expand...
Waitmovement wasn't working. I'm not exactly sure why? I played it through and it still looks good.

Thanks.
 
I have pksv and am trying to make a script where the player is given an item after the person speaks. I can get them to speak but how do I put the additem into the script?
This is what I have

#dynamic 0x74000
#org @main
message @text
callstd 2
end

#org @text
= Hey \v\h01! I hope this will help you.

additem greatball 1
 
Indescribled said:
I have pksv and am trying to make a script where the player is given an item after the person speaks. I can get them to speak but how do I put the additem into the script?
This is what I have

#dynamic 0x74000
#org @main
message @text
callstd 2
end

#org @text
= Hey \v\h01! I hope this will help you.

additem greatball 1
Click to expand...

Spoiler:
 
Here is another script I got stuck on. The script is supposed to check if you dont already have the item, then give it to you. Once that's done the movement, etc happens.

I believe most of it is right. However, when I step on the "Script" set on the ground, not on a character it freezes. No dialogue, nothing?

#dynamic 0x800000

#org @start
lock
faceplayer
applymovement 0x1 @miner
compare 0xD2 0x0
if 0x0 goto @obtained
msgbox @done 0x6
release
end

#org @obtained
msgbox @what 0x6
fanfare 0x100
giveitem 0xD2 0x1 MSG_OBTAIN
waitfanfare
msgbox @1 0x6
applymovement 0xFF @player
applymovement 0x1 @later
hidesprite 0x1
setflag 0x1
release
end

#org @miner
#raw 0x1E
#raw 0x1E
#raw 0x1E
#raw 0x1E
#raw 0x1E
#raw 0x6
#raw 0x65
#raw 0xFE

#org @player
#raw 0x55
#raw 0x3B
#raw 0xFE

#org @later
#raw 0x1F
#raw 0x1E
#raw 0x1E
#raw 0xFE

#org @what
= What are you doing kid!? \p[Player] I need to get through this cave. \nBefore you go inside, you should have lthis.

#org @done
= It seems you already have a hammer. \nBest of luck to you on your \padventure.

#org @1
= Professor is on the ocean.
Click to expand...
 
WHISBII said:
Here is another script I got stuck on. The script is supposed to check if you dont already have the item, then give it to you. Once that's done the movement, etc happens.

I believe most of it is right. However, when I step on the "Script" set on the ground, not on a character it freezes. No dialogue, nothing?
Click to expand...
Shouldn't there be a waitmovement 0x0 after applymovement 0x1 @miner?And I think it would be better to check if the player has the item in which case the script would be directed to another offset containing the @done msgbox, or if the player doesn't have it, the script would just continue after checking for the item. And I'm assuming the compare 0xD2 0x0 checks for the item?
 
AustinWolff said:
the command is giveitem 0x? 0x? 0x0

the first 0x? is the item you are giving. it has to be in hex, and there is a list of the items hex number somewhere (just google it) but for great ball, I think it is 0x3. the second 0x? is the amount you want to give the item. in your case its 0x1. if you want to give 10, it has to be in hex, which would be 0xA. the last 0x0 is a buffer. so your script would look like this:

Spoiler:


the check flags and set flags stop the event from happening again. there are numerous tutorials if you want to know more.
Click to expand...

The third parameter is not a buffer. It determines the text that is displayed. The options (MSG_OBTAIN and MSG_FIND) will display something along the lines of "PLAYER obtained/found a ITEM" depending on which value is used. Also, you should just insert a "#include stditems.rbh" statement at the beginning and use "ITEM_GREATBALL" instead of using the hex code. It's more readable that way. Finally, the parameters don't have to be in hex to work.

WHISBII said:
Here is another script I got stuck on. The script is supposed to check if you dont already have the item, then give it to you. Once that's done the movement, etc happens.

I believe most of it is right. However, when I step on the "Script" set on the ground, not on a character it freezes. No dialogue, nothing?

Spoiler:
Click to expand...

If the game is freezing it's most likely because of an error with the event data and not the script itself. Also, you're currently comparing the value of variable 0xd2 to zero. What you're trying to do is check if the player has item 0xd2. You do that by using "checkitem 0xd2 1" followed by "compare LASTRESULT B_TRUE" and "if B_TRUE goto/call @script" (although I would recommend using a symbol like "ITEM_X" instead of a hex number).
 
The third parameter is not a buffer. It determines the text that is displayed. The options (MSG_OBTAIN and MSG_FIND) will display something along the lines of "PLAYER obtained/found a ITEM" depending on which value is used. Also, you should just insert a "#include stditems.rbh" statement at the beginning and use "ITEM_GREATBALL" instead of using the hex code. It's more readable that way. Finally, the parameters don't have to be in hex to work.
Click to expand...

really? cool! so what you're saying is you could just do this is in a script?
Spoiler:
 
AustinWolff said:
really? cool! so what you're saying is you could just do this is in a script?
Spoiler:
Click to expand...

Yup, as long as you use the "#include" preprocessing directive with "stditems.rbh". Also, you can just use "1" instead of "0x1" if you want.
 
I made a movecamera script but when I step on the event the script skips over the move camera and goes strait to the end of the script. Did i have a problem in there or is it simply a compiling error?
Spoiler:
 
Indescribled said:
I have pksv and am trying to make a script where the player is given an item after the person speaks. I can get them to speak but how do I put the additem into the script?
This is what I have

#dynamic 0x74000
#org @main
message @text
callstd 2
end

#org @text
= Hey \v\h01! I hope this will help you.

additem greatball 1
Click to expand...

Finally, someone who uses PKSV -.-

Anyway, construct it like this:

Code: 
#dyn 0x740000
#org @main
lock
faceplayer
message @give
callstd MSG_NORMAL
additem GREATBALL 1
release
end

#org @give
= Hey \v\h01!\nI hope this will help you.

At least that's the basic way of writing it. However, the problem with this is that there are no flags, meaning if you talk to the guy again, he will just give you the same thing over and over. To fix this, flags will be needed. Follow this script:

Code: 
[FONT="Courier New"]#dyn 0x740000
#org @main
lock
faceplayer
checkflag 0x200
if == jump @haveit
message @talk
callstd MSG_YESNO 
compare LASTRESULT YES
if == jump @pushedyes
jump @pushedno

#org @haveit
message @howsit
callstd MSG_NORMAL
release
end

#org @pushedyes
setflag 0x200
additem GREATBALL 1
message @take
callstd MSG_NORMAL
release
end

#org @pushedno
message @notake
callstd MSG_NORMAL
release
end

#org @talk
= Here, \v\h01.\nTake this GREAT BALL.

#org @howsit
= Have you used it yet?

#org @take
= I hope it will help you.

#org @notake
= Okay, but this is your loss.[/FONT]

If you are just starting out to script using PKSV, then I suggest reading this guide. Once you're done with that, you can go to more advanced lessons like the one I made here.

Vladimir312 said:
I'm having problems with a script that is supposed to not let you pass until speaking to professor oak. Unfortunately, it just freezes your sprite and you can't move.
Here goes:

#dyn 0x740000
#org @start
compare 0x8001
if == jump @pass
msgbox @talk
callstd MSG_LOCK
applymovement PLAYER @walk
pauseevent 0x0
end

#org @pass
end

#org @talk
= I should get a pokemon before\ngoing out there[.]

#org @walk
M walk_down end
Click to expand...

Your script is okay; nothing wrong there. However, you probably forgot to set the var number of the green script tile you set for the player (in A-Map). Try setting it to something like 6001 then set the Unknown to 03. Then see if it works.
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top