• Our software update is now concluded. You will need to reset your password to log in. In order to do this, you will have to click "Log in" in the top right corner and then "Forgot your password?".
  • Welcome to PokéCommunity! Register now and join one of the best fan communities on the 'net to talk Pokémon and more! We are not affiliated with The Pokémon Company or Nintendo.
    Register

Flawed Florgres

Keanu

    • 3
    Posts
    8
    Years
    • Seen Apr 25, 2016
    Hey guys so I'm posting because. I was pulled a florgres break card from the breakthrough set number 104/162 and I noticed on the right side of the card instead of the uniform square pattern holographic it appears to be double stamped like an over lap effect. I'm assuming this is a misprint card error. Because all my other break cards including another florgres are uniform. Just curious if anyone has encountered this before or if it's worth anything. It is hard to take pictures and see the flaw but I did my best.
     

    Attachments

    • Flawed Florgres
      image.jpg
      655.8 KB · Views: 11
    donavannj

    donavannj

    • 22,954
    Posts
    19
    Years
    Keanu said:
    Hey guys so I'm posting because. I was pulled a florgres break card from the breakthrough set number 104/162 and I noticed on the right side of the card instead of the uniform square pattern holographic it appears to be double stamped like an over lap effect. I'm assuming this is a misprint card error. Because all my other break cards including another florgres are uniform. Just curious if anyone has encountered this before or if it's worth anything. It is hard to take pictures and see the flaw but I did my best.
    Click to expand...

    Based on other scans of the card I've seen, that seems like it's actually the way it's supposed to be rather than being a misprint.
     

    Keanu

    • 3
    Posts
    8
    Years
    • Seen Apr 25, 2016
    It is extremely difficult to photograph and the holographic is tricky to get just right. But I tried again to take pictures. On half of the card instead of a uniform grid pattern. On the right side the pattern seems to have overlapped in such a way to create a 3D effect like a double print. But only on half of the card.
     

    Attachments

    • Flawed Florgres
      image.jpg
      1 MB · Views: 8
    donavannj

    donavannj

    • 22,954
    Posts
    19
    Years
    Keanu said:
    It is extremely difficult to photograph and the holographic is tricky to get just right. But I tried again to take pictures. On half of the card instead of a uniform grid pattern. On the right side the pattern seems to have overlapped in such a way to create a 3D effect like a double print. But only on half of the card.
    Click to expand...

    That is a bit odd.

    If I had to guess the cause, probably a seam between holo sheets for the holo pattern used for this particular card. Could be wrong, though.
     

    Keanu

    • 3
    Posts
    8
    Years
    • Seen Apr 25, 2016
    I think u might be right I just noticed it and can't explain how it would have occurred. I'm gonna hang on to it and see if anyone else runs into this same "error" bc it's kind of interesting lol
     
    Alfieri

    Alfieri

    • 2,850
    Posts
    10
    Years
    • Seen Nov 14, 2023
    It's most likely because of the way the card gets cut. Much like even if you get an authentic pack of cards, the borders vary in size. I've had some cards with large borders and some with thin.
     
    You must log in or register to reply here.
    Back
    Top