-
Ever thought it'd be cool to have your art, writing, or challenge runs featured on PokéCommunity? Click here for info - we'd love to spotlight your work!
-
PokéCommunity's Easter Egg Hunt is now on! If you're interested in looking for some eggs and earning badges, click here!
-
Our weekly protagonist poll is now up! Vote for your favorite Conquest protagonist in the poll by clicking here.
RM2K Help/Discussion/Request Thread
- Thread starter Shadow
- Start date
- Status
invader_kim
Moogle
- 2
- Posts
- 21
- Years
- Seen Apr 12, 2013
Hey umm i am looking for some pokemon chipsets and charsets(I WANT A SQUIRTLE!) and some sailor moon charsets beacause i am merging sm with pokemon pleasee help me kupopo!
DarkMage31
RM2K(3) Master
- 1,981
- Posts
- 21
- Years
- None of your beeswax!
- Seen Nov 24, 2007
www.gaminggroundzero.com hosts Kindred Saga and other top-rate games (the best of the best)
www.gamingw.net is the largest Rm2k community. It has other types of game makers also. There are tons of resources on both.
www.rm2k3.com has excellent resources as well. Start downloading now! This site is going down in a few months!
www.gamingw.net is the largest Rm2k community. It has other types of game makers also. There are tons of resources on both.
www.rm2k3.com has excellent resources as well. Start downloading now! This site is going down in a few months!
- 33
- Posts
- 21
- Years
- Seen Jun 22, 2011
Hi! its me again. I'm wondering if anyone could help me on my battle system thingy. Well i'm using the default battle system but i manage to make it look like the official without the names and hp bars and all that but its alright for me for now. Well the problem i want to figure out rite now is whenever i have more pokemon on my party...they all shows up. so im wondering if anyone can tell me how i could choose a pokemon i want to battle and only that pokemon showing to battle with the wild pokemon. Also one thing i need to figure out is when uve reached the limit on your party... how can i create a pokemon pc thingy? well if anyone can help i would really appreciate it :). Thank you very much :).
- 33
- Posts
- 21
- Years
- Seen Jun 22, 2011
Daegon_Kimeron said:
Well if you have any example can you sendme please? it would be great :). Once I can release a demo and finish the game, I'll give you credits on it :). my email is [email protected] :) Thanxz
DarkMage31
RM2K(3) Master
- 1,981
- Posts
- 21
- Years
- None of your beeswax!
- Seen Nov 24, 2007
You using RM2K or RM2K3? It makes a difference, trust me. Once I know that I can help from there.
freakboy
Nubbie
- 84
- Posts
- 21
- Years
- Age 35
- the netherlands
- Seen Sep 25, 2006
does anyone have chipsets from pkmn FR LG?
or traines/pokemon sprites :)
or traines/pokemon sprites :)
im making a game and i need
1. Enter hero name patch and tutorial for it.
2. How to choose gender tutorial.
3. How to make a pokemon battling system tutorial.
4. A pokemon title screen.
5. Finally how to put my fonts into a folder so they work.
All help will be greatly thanked!
1. Enter hero name patch and tutorial for it.
2. How to choose gender tutorial.
3. How to make a pokemon battling system tutorial.
4. A pokemon title screen.
5. Finally how to put my fonts into a folder so they work.
All help will be greatly thanked!
DarkMage31
RM2K(3) Master
- 1,981
- Posts
- 21
- Years
- None of your beeswax!
- Seen Nov 24, 2007
Yakapuka> Start by making some variables: First Position, Second Position, and so on. Those will represent each pokemon's position in your party. Next step, we need to put pokemon into those variables. In your Hero Database, check the numbers for each hero. 0001 is who you play as and the others (0002, 0003, etch) are your pokemon. My database looks like this:
0001: Hiro
0002: Rival
0003 Bulbasaur
etc.
When you are adding pokemon to your party, have an event like as follows:
<>Message:Which position would you like to put this pokemon?
<>Show Choice: [1st],[2nd],[3rd],[4th]
:[1st] Handler:
Conditional Branch: Var:[Position 1] is, 0 > this just checks to see if this spot is open
Sucessfully placed!
:Else >If the spot is not vacant, do the following:
Message: Party position taken! Switch?
Show choice > You get the idea. Then just have a yes/no choice.
Now for the good stuff:
<>VAriable Oper: [Position 1]Set,X
X is equal to your party number. If you are setting your playable character to position one, it would read:
<>Variable Oper: [Position 1]Set,1
You would do the same for Position 2, 3, and four. Just do that when a Pokemon is captured and you'll be all set.
Now you have all your Pokemon assigned to variables. This makes things SOO much easier.
When it comes time to isolating just the first Pokemon, just create a Battle Event (database) that says the following:
<>Change Party Members: V[Position 2] Remove
<>Change Party Members: V[Position 3] Remove
<>Change Party Members: V[Position 4] Remove
That way you are left only with Position 1! When you want your other Pokemon back, just do
<>Change Party Members: V[Position 4] Add
etc.
Just make sure you don't set your Position Variables back to 0. Then you can't recover them.
If you want more help, just contact me again.
0001: Hiro
0002: Rival
0003 Bulbasaur
etc.
When you are adding pokemon to your party, have an event like as follows:
<>Message:Which position would you like to put this pokemon?
<>Show Choice: [1st],[2nd],[3rd],[4th]
:[1st] Handler:
Conditional Branch: Var:[Position 1] is, 0 > this just checks to see if this spot is open
Sucessfully placed!
:Else >If the spot is not vacant, do the following:
Message: Party position taken! Switch?
Show choice > You get the idea. Then just have a yes/no choice.
Now for the good stuff:
<>VAriable Oper: [Position 1]Set,X
X is equal to your party number. If you are setting your playable character to position one, it would read:
<>Variable Oper: [Position 1]Set,1
You would do the same for Position 2, 3, and four. Just do that when a Pokemon is captured and you'll be all set.
Now you have all your Pokemon assigned to variables. This makes things SOO much easier.
When it comes time to isolating just the first Pokemon, just create a Battle Event (database) that says the following:
<>Change Party Members: V[Position 2] Remove
<>Change Party Members: V[Position 3] Remove
<>Change Party Members: V[Position 4] Remove
That way you are left only with Position 1! When you want your other Pokemon back, just do
<>Change Party Members: V[Position 4] Add
etc.
Just make sure you don't set your Position Variables back to 0. Then you can't recover them.
If you want more help, just contact me again.
DarkMage31
RM2K(3) Master
- 1,981
- Posts
- 21
- Years
- None of your beeswax!
- Seen Nov 24, 2007
I sent you a PM
And that was only part of the battle system
And that was only part of the battle system
DarkMage31
RM2K(3) Master
- 1,981
- Posts
- 21
- Years
- None of your beeswax!
- Seen Nov 24, 2007
For enter hero name, all you need to do is install the patch correctly and then choose in your event "Enter Hero Name," select the hero you want to name, and click OK. The End.
As for changing your hero's sprite, all you need to do is in your event choose the command, "Change Hero Walk GFX," choose the hero you want to set, and then choose the new graphic. This can be combined with the command "Show Choice" that enables the player to make a decision in the game (Yes/No, True/False) with up to four choices. In field 1 you can enter "Male" and in the second field "Female." In the handler for each decision put the graphic change command. That way when they select "Male" the sprite of the character is male, and when they click "Female" they play as a female character. Capiche?
Here's sample code for the intro:
<>Message: Hello, I'm Oak and welcome to the world of Pokemon!
<>Message: Erm, what was your name again?
<>Enter Hero Name: [Choose initial name in database [F8])
<>What gender are you?
<>Show Choice: Male/Female
:[Male]Case
<>Change Hero's Walk Graphic : [Inital Name]->[file of new sprite]-1 Set
<>
:[Female]Case
<>Change Hero's Walk Graphic: [Initial Name]->[file of new female sprite]-1 Set
<>
:END Case
<>
That's it! Of course that's the basics and it can get more complecated. Just make sure you have the charaset (sprite) for Male and Female. Here's a start:
https://gamingw.net/file/resource/makers/rm2k/character/pokemontrainers.png
Just let me know if you don't understand something!
As for changing your hero's sprite, all you need to do is in your event choose the command, "Change Hero Walk GFX," choose the hero you want to set, and then choose the new graphic. This can be combined with the command "Show Choice" that enables the player to make a decision in the game (Yes/No, True/False) with up to four choices. In field 1 you can enter "Male" and in the second field "Female." In the handler for each decision put the graphic change command. That way when they select "Male" the sprite of the character is male, and when they click "Female" they play as a female character. Capiche?
Here's sample code for the intro:
<>Message: Hello, I'm Oak and welcome to the world of Pokemon!
<>Message: Erm, what was your name again?
<>Enter Hero Name: [Choose initial name in database [F8])
<>What gender are you?
<>Show Choice: Male/Female
:[Male]Case
<>Change Hero's Walk Graphic : [Inital Name]->[file of new sprite]-1 Set
<>
:[Female]Case
<>Change Hero's Walk Graphic: [Initial Name]->[file of new female sprite]-1 Set
<>
:END Case
<>
That's it! Of course that's the basics and it can get more complecated. Just make sure you have the charaset (sprite) for Male and Female. Here's a start:
https://gamingw.net/file/resource/makers/rm2k/character/pokemontrainers.png
Just let me know if you don't understand something!
- Status