Tileset Editing (R/S/E/FR/LG)

[Christos]

So, there's no way to do this without needing to re-color the tiles you want to insert to match the palette, right? If so, that's gonna be hard.

EDIT: Don, how come when I put in the tile, it just looks like this on AdvanceMap's Tile Editor:

The tile's colors don't match with the palette's.

 

[Alistair]

@Speedonh: Hmmm... If you just put tiles on the sheet (Tiled properly, I might add), it should turn up (And make sure to make them the proper pallette).

@Marz: Christos answered it for me. (I still sent you a PM, though)

 

[Swimmer♂]

@Speedonh: Hmmm... If you just put tiles on the sheet (Tiled properly, I might add), it should turn up

how do i put the tiles on a sheet an tile them properly? sorry if i'm being a pain but i really want to learn how to "tile" btw thanks for your help so far!
Thankyou

 

[Alistair]

What I mean by that is place the tiles on the sheet so they properly appear in AM. The tiles are 8x8 pixels. So, in oreder to tile properly, you need to figure out where the tiles need to go so they appear correctly in AM.

 

[Swimmer♂]

What I mean by that is place the tiles on the sheet so they properly appear in AM. The tiles are 8x8 pixels. So, in oreder to tile properly, you need to figure out where the tiles need to go so they appear correctly in AM.

but how do i put the tiles on a sheet if i can't save the tileset that i want to edit? i think what may also be another problem is that i downloaded a tileset (not to use but to look at) and now every time i go into block editor that tileset appears on the right along with the messed up sootopolis set i posted earlier. also every time i try to save tileset 0 (the standard one) i get a DIB of the tileset that i downloaded instead. plz help and i'm really sorry if i'm getting annoying. thanks for all your help so far and beyond!
Thanks
-Speedo_nh-

 

[Alistair]

See, the DIB file is the file you are supposed to edit. Have you just been inserting the tileset the way you downloaded it?

 

[Swimmer♂]

See, the DIB file is the file you are supposed to edit. Have you just been inserting the tileset the way you downloaded it?

No, i don't want to use the tileset i downloaded, i just wanted to look at it, but now every time i go into block editor it appears on the right. so everytime i try to save the the first tileset i get the tileset i downloaded (which i don't want) and every time i try to save the second tileset, i only get a part of it (like the sootopolis tileset), can u help me out plz, i appreciate greatly your help so far.
Thanks

*EDIT*
Hoorah i figured out the problem, the tilest on the right was the right tileset after all (which is kind of embarrassing) bcos i found the same one in unLZ! but i wud still like to know how to export the compltete sootopolis tileset and not just a tiny section (if i haven't been enough trouble already) thanks for everything and the tut is great!
Thanks!
-Speedo_nh-

*EDIT #2*
I now know that the sootopolis tileset was the entire tileset, as i get the same thing for every other tileset. also after eons of searching i have managed to edit the grass animation. now i am faced with a new problem, i have changed the pallete of the water (from the usual water to pallete 0) changed the tiles so the colours are good and reinserted it with no problems. it appears fine in advancemap with the tiles just how i want them, however, when i test in VBA the colour of the water has changed to a darker colour instead of lighter one and some other water colours are messed up. i went into tile viewer on vba and sure enough all the colours were strange, but the tileset wasn't exactly the same as the one in advance map. so, i would like to know: have i inserted the tileset wrong or is it something to do with the water animation (which i have not changed and do not know the offset for)? Plz help because i'm sooooo close now to finishing off my tileset!
thankyou kindly!

"image removed"
These are the water tiles i made

"image removed"
This is what shows up in VBA

 

[mamudi]

i read all the posts and i followed your insrtructions but still failed.
how do i change the regular pokemon center to this one

 

[ShadowScizor]

But how do you add another tileset within it? for example, you were hacking sapphire and was going to add fr/lg/e tiles.

 

[Hedgehogger]

I don't think that's possible. The most you can do is only replace existing tiles.

 

[Swimmer♂]

Okay, i've got my water sorted and all my tiles are looking nice (if i do say so myself XD) but i was just wondering, is it possible to insert a new tileset without replacing old ones, bcos i believe i read it somewhere, but have completely forgotten......
thnx

 

[Alistair]

No, you can not just insert a new tileset. The new one has to replace old ones.

 

[ShadowScizor]

When I inserted the Emerald tiles into my hack, some different colored lines were in the tiles.

 

[Alistair]

Are you sure you used the exact colors of the pallette?

 

[ShadowScizor]

I believe so.. But even the some of the water is not the right color..

 

[foofatron]

you have expand your rom and tiles.You should get a clean rom now.Or fix it but it will lily go over 16mb.

 

[Christos]

I believe so.. But even the some of the water is not the right color..

Don't import the tileset with palette 0, any palette than that will work.

 

[ShadowScizor]

Okay. but now when i try to insert fr/lg tiles into it, it looks all scratched up..

 

[jonicito]

In r\s\e, Use the pallete 1, 2, and 3. I'm not sure about 5. 0, 4 and sometimes other palettes messes up because it has a same color. If you want to know, look at pallette section in VBA. frlg haven't been discovered yet. When I put tileset in unlz gba, the pallete changed 0, and 1. (I check it on advance map).

 

[foullump]

I have the same problem as ShadowScizor:
When I try to insert FR\LG tiles, they're all scratched and ugly.
How do I fix that?