Graphics: DS-style Gen VII and Beyond Pokémon Sprite Repository in 64x64

[The Legacy of The Legends Creator :D]

The new forms are really well done especially the pikachus! honestly probably the best ones ive seen for them tbh

 

[thedarkdragon11]

Here are some new and updated sprites now posted in the OP:

(N-Kin, Versekr Dark, BlackWhiteRobin, haimon_99, goranthegreat)

(leParagon, thedarkdragon11 (front); haimon_99, academico95 (back))

(KajiAtsui, goranthegreat, PandiRocks@17, HeXeR, Megax Rocker, haimon_99)

(Pokemon-Diamond, HeXeR, academico95, thedarkdragon11, leParagon, haimon_99)

(fishbowlsoul90, PandiRocks@17, goranthegreat, aravi, xiechayghe, haimon_99)

(Versekr Dark, haimon_99, leParagon, Trev)

(leParagon, Tetra, haimon_99)

(leParagon, PandiRocks@17, haimon_99, princessofmusic)

(leParagon, haimon_99)

(leParagon, HeXeR, haimon_99)

(leParagon, haimon_99)

(leParagon, haimon_99)

(Wobblebuns, Versekr Dark, goranthegreat, haimon_99, OtaKun, incufan120, Trev)

(david0gamer)

(MBCMechachu, Z-nogyroP)

(Z-nogyroP)

(EndercreeperMugen)

(RousJuice)

(RousJuice, KrocF4)

(EndercreeperMugen)

I'll announce some things come November...

EDIT: Sprite hub has been updated...

 

[leparagon]

hi guys, I was thinking we could replace the Type Nu sprite with the one I have. it has the same pose as silvally but also the same proportions, which I think is fair since Silvally is literally Type Null without the helmet

i'll also be working on zygarde core & cell(fronts done), inactive xerneas(front done but a different pose), the new ultra beasts, new solgaleo and lunala forms (solga front was made mobths ago), and back sprites for cospika

I also wanna fix a few of the sugimori recolors, seeing as some pokemon have shades that blend too much with the base color. for example: yungoos' base and shade yellow are hard to distinguish. even tho we use sugi colors, we need to make sure it has ENOUGH CONTRAST to be distinguishable. I also want to fix up trumbeak as it has some detail errors

 

[MmateuszM]

I did the Back Sprites for the Ash-Pikachus

 

[thedarkdragon11]

hi guys, I was thinking we could replace the Type Nu sprite with the one I have. it has the same pose as silvally but also the same proportions, which I think is fair since Silvally is literally Type Null without the helmet

i'll also be working on zygarde core & cell(fronts done), inactive xerneas(front done but a different pose), the new ultra beasts, new solgaleo and lunala forms (solga front was made mobths ago), and back sprites for cospika

I also wanna fix a few of the sugimori recolors, seeing as some pokemon have shades that blend too much with the base color. for example: yungoos' base and shade yellow are hard to distinguish. even tho we use sugi colors, we need to make sure it has ENOUGH CONTRAST to be distinguishable. I also want to fix up trumbeak as it has some detail errors

Sure...

I did the Back Sprites for the Ash-Pikachus

Nice! Accepted...

 

[thedarkdragon11]

wait darkdragon don't accept it juuust yet. the top of the caps have black outlines on both front and back. that looks too harsh. and the outline of the caps on the front sprites look a bit jagged. i'll fix those parts a bit this weekend first if that's okay :)

edit: you know what, I took a look at the sprites again and we only need one backsprite for these things. based on the angle of the cap on the front sprite, you wouldnt be able to see the designs of the cap from the back. i'll whip up some edits tomorrow

Ah yeah... Forgot to clarify, they're accepted still as a base as I found some design inconsistencies (i.e. Sinnoh and Alola cap, Original cap)... But anyway, sure you can... :)

EDIT: In line with the cap inconsistencies that I saw, there are also some to be found on the front sprites for the same forms (Original, Sinnoh and Alola caps)...

As you can see from the official artworks in comparison to our hub sprites, the following are some inconsistencies found on the front sprites:

• Original cap's logo is not in the proper direction
• Sinnoh cap is a recolor of Hoenn cap
• Alola cap has no white and blue colors

I already fixed the Alola cap:

(The Cynical Poet, OtaKun)

Here also are updated sprites now posted in the OP:

(leParagon)

(Chaos Rush, thedarkdragon11, leParagon, GPX+)

(Chaos Rush, thedarkdragon11, leParagon, GPX+)

EDIT: So I double-checked the back of Ash hats and found out that we can't really have similar designs for all forms but it's not really a major overhaul, if any... Take a look at these:

Spoiler:

Original cap:

Hoenn cap:

Sinnoh cap:

Unova cap:

Kalos cap:

Alola cap:

 

[leparagon]

EDIT: So I double-checked the back of Ash hats and found out that we can't really have similar designs for all forms but it's not really a major overhaul, if any... Take a look at these:

Spoiler:

Original cap:

Hoenn cap:

Sinnoh cap:

Unova cap:

Kalos cap:

Alola cap:

oh yeah I forgot about those lol. dont worry i'll keep them in mind when I sprite them

 

[thedarkdragon11]

oh yeah I forgot about those lol. dont worry i'll keep them in mind when I sprite them

Thanks a lot!

 

[leparagon]

hey guys, i'd like to propose we change some of the sprites. i haven't gone through all of them, but i found some front sprites that seem a bit off. since i have those sprites in the sheet i made, i propose we replace some of the off-looking ones with some of ones i made. i'm mostly referring to front sprites since a lot of these sprites i wanna change are already using my backsprites

i'll let dark dragon take care of the sugi recolors for the new sprites if you guys agree on the replacements

some of the old front sprites i wanna replace:

Spoiler:

this and all the other colors

okay for this one, i actually made both front and back,
but the front one is really old

same thing for this one, front is my really old one

this one, too. my really old one

sprites i think we should use:

Spoiler:

sprites like these w/o a back, don't worry. will make backs soon

radiant solga has slightly diff features, so can't just recolor

same thing for full moon luna

i made this when the forms were still newly revealed. this is also a big reason why i wanna change the solga/luna sprites. the ones i made were sized specifically so that i can fit the necrozma parts properly

trev said the head lacks shading, but in my opinion it has enough shading. even if it doesn't, it's a really small detail that most may not even notice

bonus sprites! a preview of things to come for Ultra Sun and Moon. here are front sprites for UB Assembly and Burst. i haven't resized my Adhesive yet, but i'll do that next time

Spoiler:

by the way, here's Inactive Xerneas like you asked, darkdragon

it's hard to maximize the 64x64 canvas for the backsprite because Xerneas' antlers are so wide. if i made them taller, it would look disproportionate

 

[haimon_99]

sprites i think we should use:

Spoiler:

sprites like these w/o a back, don't worry. will make backs soon

radiant solga has slightly diff features, so can't just recolor

same thing for full moon luna

i made this when the forms were still newly revealed. this is also a big reason why i wanna change the solga/luna sprites. the ones i made were sized specifically so that i can fit the necrozma parts properly

trev said the head lacks shading, but in my opinion it has enough shading. even if it doesn't, it's a really small detail that most may not even notice

Great job LeParagon!
But still,I have an issue with your sprite specifically with the fronts of Oranguru and Mareanie ,They are just too small.Try to resize those sprites and then I think that they can be used and match their real weight and height.

 

[leparagon]

Great job LeParagon!
But still,I have an issue with your sprite specifically with the fronts of Oranguru and Mareanie ,They are just too small.Try to resize those sprites and then I think that they can be used and match their real weight and height.

oh yeah, you have a point with oranguru. i'll resize it some time within the week. however i'm not sure about mareanie. it's supposed to be half the size of a corsola, so made it a bit smaller than the corsola sprite from ChaosRush's project. i'll try to resize first then i'll see if it still looks like the right size :)

 

[goranthegreat]

Before you guys think about replacing lunala's back sprite i edited the original.. i don't know thou
le_paragon could still make a new back thou i'm just putting this one out there.

credits (SirAquakip, Kevin RDS, Entermaid, HeXeR, le_paragon front sprite and shiny!)
Edit:sprites i did a long while ago i went over them again and i also sugimoried them and i used le_paragon's shiny palettes :)

the Original

the original

the original

the original
credits Sandygast: Z-nogyroP, goranthegreat Palossand: Z-nogyroP, Kevin RDS, goranthegreat Shiinotic: leParagon (front), goranthegreat (back) Rowlet: N-Kin, Versekr Dark, BlackWhiteRobin, haimon_99, goranthegreat

 

[Z-nogyroP]

hey guys, i'd like to propose we change some of the sprites. i haven't gone through all of them, but i found some front sprites that seem a bit off. since i have those sprites in the sheet i made, i propose we replace some of the off-looking ones with some of ones i made. i'm mostly referring to front sprites since a lot of these sprites i wanna change are already using my backsprites

i'll let dark dragon take care of the sugi recolors for the new sprites if you guys agree on the replacements

some of the old front sprites i wanna replace:

Spoiler:

this and all the other colors

okay for this one, i actually made both front and back,
but the front one is really old

same thing for this one, front is my really old one

this one, too. my really old one

sprites i think we should use:

Spoiler:

sprites like these w/o a back, don't worry. will make backs soon

radiant solga has slightly diff features, so can't just recolor

same thing for full moon luna

i made this when the forms were still newly revealed. this is also a big reason why i wanna change the solga/luna sprites. the ones i made were sized specifically so that i can fit the necrozma parts properly

trev said the head lacks shading, but in my opinion it has enough shading. even if it doesn't, it's a really small detail that most may not even notice

bonus sprites! a preview of things to come for Ultra Sun and Moon. here are front sprites for UB Assembly and Burst. i haven't resized my Adhesive yet, but i'll do that next time

Spoiler:

by the way, here's Inactive Xerneas like you asked, darkdragon

it's hard to maximize the 64x64 canvas for the backsprite because Xerneas' antlers are so wide. if i made them taller, it would look disproportionate

i would be fine with all of these myself (and i don't think oranguru and mareanie need to be resized, they seem fine as they are) with the exception of minior. the sprite is good overall, but the points on core form are really small. if those were made more proportionate then it'd be pretty much perfect.

 

[leparagon]

i'm okay w the lunala backsprites, altho I still see some things I wanna edit on it

also thanks for the feedback porygon, i'll fix it up tomorrow morning. I guess I just need to make the round body smaller a bit while keeping the points there and just adjusting accordingly

 

[haimon_99]

however i'm not sure about mareanie. it's supposed to be half the size of a corsola, so made it a bit smaller than the corsola sprite from ChaosRush's project. i'll try to resize first then i'll see if it still looks like the right size :)

Well,I see that I really needed to check the dimensions.And with that being said,Grubbin also looks bigger than mareanie,but I think its fine because after all,its in 64?64.

 

[thedarkdragon11]

First of all, in line with the upcoming release of USUM, I'm temporarily closing submissions and sprite change requests regarding in-battle sprites not found in the hub... So please don't touch any sprites not found in the hub yet... This is only temporary as I'm planning on some things that a constant change in sprites will defer it and also for USUM sprites not to be overlooked...

hey guys, i'd like to propose we change some of the sprites. i haven't gone through all of them, but i found some front sprites that seem a bit off. since i have those sprites in the sheet i made, i propose we replace some of the off-looking ones with some of ones i made. i'm mostly referring to front sprites since a lot of these sprites i wanna change are already using my backsprites

i'll let dark dragon take care of the sugi recolors for the new sprites if you guys agree on the replacements

some of the old front sprites i wanna replace:

Spoiler:

this and all the other colors

okay for this one, i actually made both front and back,
but the front one is really old

same thing for this one, front is my really old one

this one, too. my really old one

sprites i think we should use:

Spoiler:

sprites like these w/o a back, don't worry. will make backs soon

radiant solga has slightly diff features, so can't just recolor

same thing for full moon luna

i made this when the forms were still newly revealed. this is also a big reason why i wanna change the solga/luna sprites. the ones i made were sized specifically so that i can fit the necrozma parts properly

trev said the head lacks shading, but in my opinion it has enough shading. even if it doesn't, it's a really small detail that most may not even notice

bonus sprites! a preview of things to come for Ultra Sun and Moon. here are front sprites for UB Assembly and Burst. i haven't resized my Adhesive yet, but i'll do that next time

Spoiler:

by the way, here's Inactive Xerneas like you asked, darkdragon

it's hard to maximize the 64x64 canvas for the backsprite because Xerneas' antlers are so wide. if i made them taller, it would look disproportionate

Good points... Though some might need to be resized... Especially those which look small and those which became smaller or larger than the currently featured sprites... I'll double check them later...

About Inactive Xerneas, particularly the back sprite, I think it has to be the same size with the currently featured back sprite...

Before you guys think about replacing lunala's back sprite i edited the original.. i don't know thou
le_paragon could still make a new back thou i'm just putting this one out there.

credits (SirAquakip, Kevin RDS, Entermaid, HeXeR, le_paragon front sprite and shiny!)
Edit:sprites i did a long while ago i went over them again and i also sugimoried them and i used le_paragon's shiny palettes :)

the Original

the original

the original

the original
credits Sandygast: Z-nogyroP, goranthegreat Palossand: Z-nogyroP, Kevin RDS, goranthegreat Shiinotic: leParagon (front), goranthegreat (back) Rowlet: N-Kin, Versekr Dark, BlackWhiteRobin, haimon_99, goranthegreat

Some of them can be used but not all... Especially those with major alterations (except Palossand which is nice minus the edges) and those which are too dark...

 

[Shiny1um]

I really like your idea thedarkdragon11 but can you please make a compiled link to get allthe sprites at one place.

 

[thedarkdragon11]

I really like your idea thedarkdragon11 but can you please make a compiled link to get allthe sprites at one place.

Please, be patient... Just like a sprite submission, it will eventually come...

 

[thiago alvess]

I did the Back Sprites for the Ash-Pikachus

 

[thedarkdragon11]

Announcements:

• We have new deputies: le_paragon and Z-nogyroP who will be joining Trev for the in-battle sprites, and Megax Rocker who will be joining MBCMechachu for the icon sprites...
• Once datamines of USUM models with the shiny colors are out, submission of sprites for new form/es and species will be automatically opened...
• Additional form/es introduced from previous generations which cannot be found anywhere will also be added soon...
• A Dropbox link of this repository will become available at the end of November...
• Further improvement of sprites not listed in the hub will remain suspended until further notice...