• Just a reminder that providing specifics on, sharing links to, or naming websites where ROMs can be accessed is against the rules. If your post has any of this information it will be removed.
  • Ever thought it'd be cool to have your art, writing, or challenge runs featured on PokéCommunity? Click here for info - we'd love to spotlight your work!
  • PokéCommunity's Easter Egg Hunt is now on! If you're interested in looking for some eggs and earning badges, click here!
  • Our weekly protagonist poll is now up! Vote for your favorite Conquest protagonist in the poll by clicking here.
  • Welcome to PokéCommunity! Register now and join one of the best fan communities on the 'net to talk Pokémon and more! We are not affiliated with The Pokémon Company or Nintendo.
    Register

[ARCHIVE] Simple Questions (SEARCH BEFORE ASKING A QUESTION)

Status
Not open for further replies.
I spent some time searching Emerald for the battle menu text like

"Wild ____ appeared!"

for example, and couldn't find it. I don't think anyone has the offset, are Emerald's hex values different from R/S/FR/LG? (I tried both.)
 
HACKERXIDE said:
I've been through alot of tough problems and I'd like to think I'm a good scripter, but I'm running into probally the most simple problem.

I can't seem to get wild pokemon to appear in my new map!

Its a Cave by the way, and putting actual grass in it would mess up the look of the cave, but I went to other caves in the game to figure it out and they are set up a Grass, so thats what I did in the wild pokemon header view.

I chose the grass option, then set the Encounter Ratio, and filled out the Pokemon data (all the way!)

But to no avail I get no Pokemon action.

Anyone know what to do?
Click to expand...

Have you tried to change the area type to Cave? I don't know if that would help, but it seems to work when I do it.
 
Any way of using D/P/Pt overworlds (Dawn, Lucas, Barry, etc.) in Fire Red?

Trying to replace the girl/heroine to Dawn.
 
Hey everyone, two quick questions about some problems I'm having.

1. I've created some caves and the warps are working fine except when the character warps in he is facing down when he should be facing up (or the direction you entered). Any way to fix this?

2. All my warps work except for the cave exit (the lit door you use to exit a cave). It has the warp in front of the actual door as well as one on it. You cannot walk on the door itself but you have a C permission tile where the warp is. Right now the character walks where the warp should be but it is not warping to the new map. Any ideas?

Thanks in advance for any help!
 
cheshirecat said:
Hey everyone, two quick questions about some problems I'm having.

1. I've created some caves and the warps are working fine except when the character warps in he is facing down when he should be facing up (or the direction you entered). Any way to fix this?

2. All my warps work except for the cave exit (the lit door you use to exit a cave). It has the warp in front of the actual door as well as one on it. You cannot walk on the door itself but you have a C permission tile where the warp is. Right now the character walks where the warp should be but it is not warping to the new map. Any ideas?

Thanks in advance for any help!
Click to expand...

There is a second 'generic cave floor' tile in each of the various cave tilesets which has different attributes to the regular cave floor tiles. It has a behaviour byte of 0x65 which makes an downwards arrow appear when you step on it, allows you to use warps and correctly faces the player's OW upwards when entering the cave.

It is generally at the top of the cave tileset and will solve all of your problems :)
 
hinkage said:
I spent some time searching Emerald for the battle menu text like

"Wild ____ appeared!"

for example, and couldn't find it. I don't think anyone has the offset, are Emerald's hex values different from R/S/FR/LG? (I tried both.)
Click to expand...
0x005CBB47 It's around that offset. Look there.
 
Question about tile animations on its way:

I was experimenting a little with tiles on Fire Red and I figured I wanted a sand dune tile that the player could walk through and encounter ground and desert pokemon. So I decided to use the rarely-used sea tiles that you only really see at the Sevii Islands and changed their colour to a sandy colour. I changed the behaviour bytes to the same as those found on regular sand, 21 and 00, with 21 signifying footprints.

I also changed the background byte to 00 and 01, with 01 signifying grass encounters but without the grass animation.

When I run the ROM it is still water animation, still blue with moving waves instead of the static golden waves I had hoped for.

Is it possible to remove the water animation or will I need to find another way to put sand dune tiles on the ROM?
 
Beechlgz said:
Question about tile animations on its way:

I was experimenting a little with tiles on Fire Red and I figured I wanted a sand dune tile that the player could walk through and encounter ground and desert pokemon. So I decided to use the rarely-used sea tiles that you only really see at the Sevii Islands and changed their colour to a sandy colour. I changed the behaviour bytes to the same as those found on regular sand, 21 and 00, with 21 signifying footprints.

I also changed the background byte to 00 and 01, with 01 signifying grass encounters but without the grass animation.

When I run the ROM it is still water animation, still blue with moving waves instead of the static golden waves I had hoped for.

Is it possible to remove the water animation or will I need to find another way to put sand dune tiles on the ROM?
Click to expand...

I think you might be able to remove it with an animation editor, which I forget where I seen it. Or you can manually move the tile on the actual tileset to another position because thats wherer the animation is set to be. Not the block editor but the tileset.
 
POKEPIC HELP!

When ever I try to insert a pokemon into pokepic
BOOM

[PokeCommunity.com] [ARCHIVE] Simple Questions (SEARCH BEFORE ASKING A QUESTION)


HELP ME!!!
 
How do I edit the Intro text in Pokémon Gold
 
Nijix said:
The problem is that D/P/Pt OWs are bigger than GBA OWs. Can't import OWs exceeding 16x32. Resizing sprites blurs the pixels.
Click to expand...

Then re-size the OW's to 32x32 in NSE [Classic] Edit>> Preferences
Change the size and save "ALL" NOT INDEX
Make sure you backup frequently while doing this, because errors have happened.
Also, the way I wrote NSE classic you might have to click the change palette button after you change the size.

Anbuja's_BlooDY said:
reposting mah post:P...............
Click to expand...
If it's that important to you and if your using Firered Leafgreen or Emerald VM me and I'll write a quick plugin for ya (at least for the Pokemon sprites) :P
 
Anbuja's_BlooDY said:
Does anyone know how to export all sprites in a rom at once??
like every pokemon sprite ive inserted in my hack i want to export them now...but im to lazy to export them one by one so is it able with NSE or another tool to export the pokemon sprites all at once?
Click to expand...
RSball should be enough. Well that is all I have to say about that...
 
Hi, as is obvious I'm hacking a pokemon game, and I had one question that has bugged me for a long time, but I've never been able to find the answer.

When hacking FireRed, is it possible to change the script of Oak's intro? (Not what he says, but like make it so that you take out the part where you choose the rival's name, etc.)

Thanks!
~BLAZE
 
BLAZEQUAZA said:
Hi, as is obvious I'm hacking a pokemon game, and I had one question that has bugged me for a long time, but I've never been able to find the answer.

When hacking FireRed, is it possible to change the script of Oak's intro? (Not what he says, but like make it so that you take out the part where you choose the rival's name, etc.)

Thanks!
~BLAZE
Click to expand...

Not without using ASM. But removing the rival has been done by a few people now, so you know it's possible.
 
BLAZEQUAZA said:
Hi, as is obvious I'm hacking a pokemon game, and I had one question that has bugged me for a long time, but I've never been able to find the answer.

When hacking FireRed, is it possible to change the script of Oak's intro? (Not what he says, but like make it so that you take out the part where you choose the rival's name, etc.)

Thanks!
~BLAZE
Click to expand...
Jambo51 released a hack for that which you find here.
 
Status
Not open for further replies.
Back
Top