Binary Hack Research & Development
Code ASM Resource Thread Page 33
Started by esperance September 19th, 2014 3:13 PM- 517119 views
- 1616 replies
- Wild Pokemon Custom Moves •The reason why it needs to be edited because there are times that var 8000 is used in an event plus the wild battle thing, it automatically sets pokemon move whatever value is stored in that var. It would be good if it can be toggleabe by flag or var.
Male
Criscanto town-Ginoa Region xD
Seen August 13th, 2017
Posted January 1st, 2017
792
posts
9.1
Years
thanks, gonna try tis' one
This signature has been disabled.
Scrollbar appears
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Nature-affected stats colouring routines [FR]:
CLICK FOR EMERALD
This is probably the least efficient way to do this, but it works.
Attack:
.thumb
@ 00 49 08 47 XX XX XX XX at x137134
ldr r1, [r2]
ldrb r2,[r1,#4]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #1 @ Lonely
beq red
cmp r0, #2 @ Brave
beq red
cmp r0, #3 @ Adamant
beq red
cmp r0, #4 @ Naughty
beq red
cmp r0, #5 @ Bold
beq blue
cmp r0, #10 @ Timid
beq blue
cmp r0, #15 @ Modest
beq blue
cmp r0, #20 @ Calm
beq blue
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x0813713c+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Defense:.thumb
@ 00 49 08 47 XX XX XX XX at x137158
ldr r1, [r2]
ldrb r2,[r1,#6]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #1 @ Lonely
beq blue
cmp r0, #5 @ Nold
beq red
cmp r0, #7 @ Relaxed
beq red
cmp r0, #8 @ Impish
beq red
cmp r0, #9 @ Lax
beq red
cmp r0, #11 @ Hasty
beq blue
cmp r0, #16 @ Mild
beq blue
cmp r0, #21 @ Gentle
beq blue
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x08137162+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Special Attack:.thumb
@ 00 49 08 47 XX XX XX XX at x13717C
mov r2,r8
ldr r1, [r2]
ldrb r2,[r1,#8]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #3 @ Adamant
beq blue
cmp r0, #8 @ Impish
beq blue
cmp r0, #13 @ Jolly
beq blue
cmp r0, #15 @ Modest
beq red
cmp r0, #16 @ Mild
beq red
cmp r0, #17 @ Quiet
beq red
cmp r0, #19 @ Rash
beq red
cmp r0, #23 @ Careful
beq blue
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x08137188+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Special Defense:.thumb
@ 00 49 08 47 XX XX XX XX at x1371A4
ldr r1, [r2]
ldrb r2,[r1,#0xA]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #4 @ Naughty
beq blue
cmp r0, #9 @ Lax
beq blue
cmp r0, #14 @ Naive
beq blue
cmp r0, #19 @ Rash
beq blue
cmp r0, #20 @ Calm
beq red
cmp r0, #21 @ Gentle
beq red
cmp r0, #22 @ Sassy
beq red
cmp r0, #23 @ Careful
beq red
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x081371AE+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Speed:.thumb
@ 00 49 08 47 XX XX XX XX at x1371C8
mov r2,r8
ldr r1, [r2]
ldrb r2,[r1,#0xC]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #2 @ Brave
beq blue
cmp r0, #7 @ Relaxed
beq blue
cmp r0, #10 @ Timid
beq red
cmp r0, #11 @ Hasty
beq red
cmp r0, #13 @ Jolly
beq red
cmp r0, #14 @ Naive
beq red
cmp r0, #17 @ Quiet
beq blue
cmp r0, #22 @ Sassy
beq blue
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x081371d4+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Reverting the font colour back to black:.thumb @ 00 49 08 47 XX XX XX XX at 081371F0 ldr r1, [r2] ldrb r2,[r1,#0xE] add r2,#0xF lsl r2,r2,#0x18 lsr r2,r2,#0x18 ldr r6, blackfont ldr r1, =(0x081371FA+1) bx r1 .align 2 blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00where XX XX XX XX is the location of each routine +1.
This colours the stat increased by the Pokémon's nature red, and the stat that is decreased blue.
Edit: Updated 23/12/2015, the old routines had a few errors that I forgot to update after making changes to my ROM. I've also confirmed what bluefont should be in a vanilla ROM. Enjoy!
I've noticed significant demand for working Dawn Stone evolutions, specifically ones that require the mon to be a specific gender. My bad if this is already posted somewhere but here y'all go:
.org 0x4318e
lsl r0, r0, #0x0
ldr r2, .MethodAddr
bx r2
.MethodAddr: .word 0x085B2521 #UPDATE THIS TO MAIN FUNCTION OFFSET+1
.org 0x5B2520 #UPDATE THIS TO MOST CONVENIENT FREE SPACE IN YOUR HACK
cmp r0, #0x7
beq StandardStone
cmp r0, #0x14 #UPDATE THIS
beq MaleStone
cmp r0, #0x15 #UPDATE THIS
beq FemaleStone
b NoEvo
MaleStone:
push {r1-r3}
mov r0, r7
mov r1, r8
ldr r1, [r1, #0x0]
bl DetermineGender
pop {r1-r3}
cmp r0, #0x0
beq StandardStone
b NoEvo
FemaleStone:
push {r1-r3}
mov r0, r7
mov r1, r8
ldr r1, [r1, #0x0]
bl DetermineGender
pop {r1-r3}
cmp r0, #0xFE
beq StandardStone
b NoEvo
StandardStone:
ldrh r0, [r1, #0x2]
cmp r0, r9
beq Finish
NoEvo:
ldr r2, .NoEvoReturn
bx r2
DetermineGender:
ldr r2, .DetermineGenderFunc
bx r2
Finish:
ldr r2, .EvoReturn
bx r2
.NoEvoReturn: .word 0x08043199
.EvoReturn: .word 0x0804317d
.DetermineGenderFunc: .word 0x0803f78dChange the values in the lines marked UPDATE THIS to the indexes of male stone evos and female stone evos. Leave their entries blank in the general evolution table; stone evolutions function differently from level-up evolutions.
checkitem hack to store quantity in 0x8008
This is probably a relatively esoteric hack, but I found a use for it so I might as well share it. When using the checkitem command, it will now buffer the quantity of said item into the variable 0x8008, and then behaves as usual for the regular usage of the command.
The reason I made this was to do something like the following dummy script:
checkitem ITEM_BLUESHARD 0x1 if B_< goto @none buffernumber 0x0 0x8008 msgbox @string1 0x6 ... #org @string1 = You have [buffer1] Blue Shards.It will always buffer to 0x8008, but you can change the RAM loc in the routine if you want it to be some other variable.
.thumb @ 00 4A 10 47 XX+1 XX XX XX at 08099f88 lsl r0,r0,#0x10 lsr r0,r0,#0x10 ldr r2, =(0x020370C8) @ RAM location of 0x8008 strh r0, [r2] ldr r2, =(0x08099f58+1) cmp r0, r5 bcs branch ldr r2, =(0x08099f90+1) branch: bx r2
Nature-affected stats colouring routines [FR]:
This is probably the least efficient way to do this, but it works.
Attack:
.thumb
@ 00 49 08 47 XX XX XX XX at x137134
ldr r1, [r2]
ldrb r2,[r1,#4]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #1 @ Lonely
beq red
cmp r0, #2 @ Brave
beq red
cmp r0, #3 @ Adamant
beq red
cmp r0, #4 @ Naughty
beq red
cmp r0, #5 @ Bold
beq blue
cmp r0, #10 @ Timid
beq blue
cmp r0, #15 @ Modest
beq blue
cmp r0, #20 @ Calm
beq blue
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x0813713c+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Defense:.thumb
@ 00 49 08 47 XX XX XX XX at x137158
ldr r1, [r2]
ldrb r2,[r1,#6]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #1 @ Lonely
beq blue
cmp r0, #5 @ Nold
beq red
cmp r0, #7 @ Relaxed
beq red
cmp r0, #8 @ Impish
beq red
cmp r0, #9 @ Lax
beq red
cmp r0, #11 @ Hasty
beq blue
cmp r0, #16 @ Mild
beq blue
cmp r0, #21 @ Gentle
beq blue
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x08137162+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Special Attack:.thumb
@ 00 49 08 47 XX XX XX XX at x13717C
mov r2,r8
ldr r1, [r2]
ldrb r2,[r1,#8]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #3 @ Adamant
beq blue
cmp r0, #8 @ Impish
beq blue
cmp r0, #13 @ Jolly
beq blue
cmp r0, #15 @ Modest
beq red
cmp r0, #16 @ Mild
beq red
cmp r0, #17 @ Quiet
beq red
cmp r0, #19 @ Rash
beq red
cmp r0, #23 @ Careful
beq blue
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x08137188+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Special Defense:.thumb
@ 00 49 08 47 XX XX XX XX at x1371A4
ldr r1, [r2]
ldrb r2,[r1,#0xA]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #4 @ Naughty
beq blue
cmp r0, #9 @ Lax
beq blue
cmp r0, #14 @ Naive
beq blue
cmp r0, #19 @ Rash
beq blue
cmp r0, #20 @ Calm
beq red
cmp r0, #21 @ Gentle
beq red
cmp r0, #22 @ Sassy
beq red
cmp r0, #23 @ Careful
beq red
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x081371AE+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Speed:.thumb
@ 00 49 08 47 XX XX XX XX at x1371C8
mov r2,r8
ldr r1, [r2]
ldrb r2,[r1,#0xC]
add r2,#0x32
lsl r2,r2,#0x18
lsr r2,r2,#0x18
push {r0-r3}
ldr r0, =(0x0203B140)
ldr r0, [r0]
ldr r2, =(0x3290)
add r0, r0, r2
mov r1, #0
bl decryptbranch
bl getnaturebranch
cmp r0, #2 @ Brave
beq blue
cmp r0, #7 @ Relaxed
beq blue
cmp r0, #10 @ Timid
beq red
cmp r0, #11 @ Hasty
beq red
cmp r0, #13 @ Jolly
beq red
cmp r0, #14 @ Naive
beq red
cmp r0, #17 @ Quiet
beq blue
cmp r0, #22 @ Sassy
beq blue
black:
ldr r6, blackfont
b end
red:
ldr r6, redfont
b end
blue:
ldr r6, bluefont
end:
pop {r0-r3}
ldr r1, =(0x081371d4+1)
bx r1
decryptbranch:
ldr r2, =(0x0803FBE8+1)
bx r2
getnaturebranch:
ldr r2, =(0x08042EB4+1)
bx r2
.align 2
blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00
redfont: .word 0x08RRRRRR @ ROM location that contains: 00 01 0A 00
bluefont: .word 0x08BBBBBB @ ROM location that contains: 00 07 0A 00Reverting the font colour back to black:.thumb @ 00 49 08 47 XX XX XX XX at 081371F0 ldr r1, [r2] ldrb r2,[r1,#0xE] add r2,#0xF lsl r2,r2,#0x18 lsr r2,r2,#0x18 ldr r6, blackfont ldr r1, =(0x081371FA+1) bx r1 .align 2 blackfont: .word 0x08463FA4 @ In a vanilla FR ROM, this contains: 00 0E 0A 00where XX XX XX XX is the location of each routine +1.
This colours the stat increased by the Pokémon's nature red, and the stat that is decreased blue.
Edit: Updated 23/12/2015, the old routines had a few errors that I forgot to update after making changes to my ROM. I've also confirmed what bluefont should be in a vanilla ROM. Enjoy!
I don't know why but for me it doesn't works.
I've replaced the XX XX XX XX with the following pointers for each routines
Spoiler:
After that, I have replace the two last lines for each of them except for the last one (reverting font) with that :
Spoiler:
I've test it with a calm bulbasaur but everything stay black. No blue colour or red colour.
Donate for Cloud White games Here >>>https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YJU6WGVDJ2SNL
I don't know why but for me it doesn't works.
I've replaced the XX XX XX XX with the following pointers for each routines
After that, I have replace the two last lines for each of them except for the last one (reverting font) with that :
I've test it with a calm bulbasaur but everything stay black. No blue colour or red colour.
I've replaced the XX XX XX XX with the following pointers for each routines
Spoiler:
After that, I have replace the two last lines for each of them except for the last one (reverting font) with that :
Spoiler:
I've test it with a calm bulbasaur but everything stay black. No blue colour or red colour.
When trying to figure out a problem, always state what rom you are modding...
Aslo I can tell you that you didn't do +1 with your reverse Hex...
ergo "Attack : Offset CFAEC1 >>> pointer C1 AE CF 08" should look like
"Attack : Offset CFAEC1 >>> pointer C2 AE CF 08"
That isn't how it works either. The asm itself needs to be halfword aligned for the opcodes. The +1 is to branch in THUMB mode. Therefore, on top of the opcodes not being aligned, you'd be branching to 0x08CFAEC2 in ARM (which also makes no sense because ARM is four bytes per instruction). The problem is that the bin should be pasted at 0xCFAEC0.
Aslo I can tell you that you didn't do +1 with your reverse Hex...
ergo "Attack : Offset CFAEC1 >>> pointer C1 AE CF 08" should look like
"Attack : Offset CFAEC1 >>> pointer C2 AE CF 08"
That isn't how it works either. The asm itself needs to be halfword aligned for the opcodes. The +1 is to branch in THUMB mode. Therefore, on top of the opcodes not being aligned, you'd be branching to 0x08CFAEC2 in ARM (which also makes no sense because ARM is four bytes per instruction). The problem is that the bin should be pasted at 0xCFAEC0.
No. I've found my error. It was in the line about the redfont and the bluefont offsets but now here is the result
Donate for Cloud White games Here >>>https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YJU6WGVDJ2SNL
The Toggling Runaway doesn't seem to work.
The Toggling Runaway doesn't seem to work.
It's fixed now! Thanks for alerting me to that.
Male
Criscanto town-Ginoa Region xD
Seen August 13th, 2017
Posted January 1st, 2017
792
posts
9.1
Years
Guys, I really really need this routine, I know it wouldn't be hard for you, I got a bug on my rom and I made a lot of changes in that. The bug is the TM and HM, it doesn't really work properly.
So my request is a routine that checks if that pokemon can learn a certain move, var 8004 fpr the Pokemon Specie and var 8005 for the move to check, then that routine will check the table of learnable moves of that Pokèmon.
So my request is a routine that checks if that pokemon can learn a certain move, var 8004 fpr the Pokemon Specie and var 8005 for the move to check, then that routine will check the table of learnable moves of that Pokèmon.
This signature has been disabled.
Scrollbar appears
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Guys, I really really need this routine, I know it wouldn't be hard for you, I got a bug on my rom and I made a lot of changes in that. The bug is the TM and HM, it doesn't really work properly.
So my request is a routine that checks if that pokemon can learn a certain move, var 8004 fpr the Pokemon Specie and var 8005 for the move to check, then that routine will check the table of learnable moves of that Pokèmon.
I'd say fixing the TM bag would be the better option, butSo my request is a routine that checks if that pokemon can learn a certain move, var 8004 fpr the Pokemon Specie and var 8005 for the move to check, then that routine will check the table of learnable moves of that Pokèmon.
ldr r3, var8004 ldrh r0, [r3, #0x0] lsl r0, r0, #0x3 @assuming length of tm compatibility is still 8 bytes ldr r1, tm_compatibility add r0, r1 ldrh r2, [r3, #0x2] @var8005 lsr r1, r2, #0x3 @I assume “move” is tm number, not the actual move index? ldrb r0, [r0, r1] lsl r2, r2, #0x1D lsr r2, r2, #0x1D lsr r0, r0, r2 lsl r0, r0, #0x1F lsr r0, r0, #0x1F strh r0, [r3, 0x0] @store back in var8004, or wherever bx lr .align var8004: .word 0x Donotknowoffsetoffthetopofmyhead tm_compatibility: .word 0x WhereverYouPutIt
Male
Criscanto town-Ginoa Region xD
Seen August 13th, 2017
Posted January 1st, 2017
792
posts
9.1
Years
I'd say fixing the TM bag would be the better option, but
Thank you very much, this is helpful indeed. Anyway I expanded the number of TM so do I have to change some values there? Andldr r3, var8004 ldrh r0, [r3, #0x0] lsl r0, r0, #0x3 @assuming length of tm compatibility is still 8 bytes ldr r1, tm_compatibility add r0, r1 ldrh r2, [r3, #0x2] @var8005 lsr r1, r2, #0x3 @I assume “move” is tm number, not the actual move index? ldrb r0, [r0, r1] lsl r2, r2, #0x1D lsr r2, r2, #0x1D lsr r0, r0, r2 lsl r0, r0, #0x1F lsr r0, r0, #0x1F strh r0, [r3, 0x0] @store back in var8004, or wherever bx lr .align var8004: .word 0x Donotknowoffsetoffthetopofmyhead tm_compatibility: .word 0x WhereverYouPutIt
var 8004 is the Pokèmon number and Var 8005 is the TM Number, let's say TM32, it would be 20, then, in var 8004, it will state whether it's 1,l earnable or 0, not learnable
This signature has been disabled.
Scrollbar appears
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Thank you very much, this is helpful indeed. Anyway I expanded the number of TM so do I have to change some values there? And
var 8004 is the Pokèmon number and Var 8005 is the TM Number, let's say TM32, it would be 20, then, in var 8004, it will state whether it's 1,l earnable or 0, not learnable
I'm guessing that you meant to say "TM32, it would be 0x20" which would be almost correct. TM indexing starts at zero, so the index for TM01 is 0x00, TM02 is 0x01, ..., TM32 is 0x1F (31 decimal). The answer to the TM expansion depends on exactly what your TM compatibility table looks like, specifically how long an entry is for a species. In the regular game, the table is 8 bytes long (64 bits) so I used the instructionvar 8004 is the Pokèmon number and Var 8005 is the TM Number, let's say TM32, it would be 20, then, in var 8004, it will state whether it's 1,l earnable or 0, not learnable
lsl r0, r0, #0x3 @assuming length of tm compatibility is still 8 bytesBecause that shift is multiplying species index by eight.
As for var8004 at the end of routine, yes. After the routine, var8004 will contain 0 for incompatible and 1 for compatible.
Male
Criscanto town-Ginoa Region xD
Seen August 13th, 2017
Posted January 1st, 2017
792
posts
9.1
Years
I'm guessing that you meant to say "TM32, it would be 0x20" which would be almost correct. TM indexing starts at zero, so the index for TM01 is 0x00, TM02 is 0x01, ..., TM32 is 0x1F (31 decimal). The answer to the TM expansion depends on exactly what your TM compatibility table looks like, specifically how long an entry is for a species. In the regular game, the table is 8 bytes long (64 bits) so I used the instruction
As for var8004 at the end of routine, yes. After the routine, var8004 will contain 0 for incompatible and 1 for compatible.
The new compatibility contains 16 bytes, (128 bits) soI'll make it lsl r0, r0, #0x3 @assuming length of tm compatibility is still 8 bytesBecause that shift is multiplying species index by eight.
As for var8004 at the end of routine, yes. After the routine, var8004 will contain 0 for incompatible and 1 for compatible.
lsl r0, r0, #0x4I got it now, thanks a lot.
This signature has been disabled.
Scrollbar appears
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Could anyone port the Ability Switching to Emerald? Unless I missed it somewhere...
http://www.pokecommunity.com/showpost.php?p=8533505&postcount=278
http://www.pokecommunity.com/showpost.php?p=8533505&postcount=278
Male
Criscanto town-Ginoa Region xD
Seen August 13th, 2017
Posted January 1st, 2017
792
posts
9.1
Years
Could anyone port the Ability Switching to Emerald? Unless I missed it somewhere...
http://www.pokecommunity.com/showpost.php?p=8533505&postcount=278
I haven't tested it yethttp://www.pokecommunity.com/showpost.php?p=8533505&postcount=278
Ability switching: EMERALD
Very simple, it turned out to not have to adjust the PID.
How to insert:
Just compile the following routine into free space:
Spoiler:
Usage:
Set in variable 0x8004 the slot number of the Pokemon who's ability you want to swap. Note that Pokemon with only 1 ability won't have their abilities swapped.
This signature has been disabled.
Scrollbar appears
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
I haven't tested it yet
Very simple, it turned out to not have to adjust the PID.
How to insert:
Just compile the following routine into free space:
Usage:
Set in variable 0x8004 the slot number of the Pokemon who's ability you want to swap. Note that Pokemon with only 1 ability won't have their abilities swapped.
Tried it with a dual ability Pokemon and didn't change.Ability switching: EMERALD
Very simple, it turned out to not have to adjust the PID.
How to insert:
Just compile the following routine into free space:
Spoiler:
Usage:
Set in variable 0x8004 the slot number of the Pokemon who's ability you want to swap. Note that Pokemon with only 1 ability won't have their abilities swapped.
=\ Any ideas?
Male
Criscanto town-Ginoa Region xD
Seen August 13th, 2017
Posted January 1st, 2017
792
posts
9.1
Years
Tried it with a dual ability Pokemon and didn't change.
=\ Any ideas?
I'll try to look at that, perhaps one of the addresses is incorrect.=\ Any ideas?
I'd say fixing the TM bag would be the better option, but
Tried this one, but it doesn't work correctly, I modified the routine because it doesn't compile to my compilerldr r3, var8004 ldrh r0, [r3, #0x0] lsl r0, r0, #0x3 @assuming length of tm compatibility is still 8 bytes ldr r1, tm_compatibility add r0, r1 ldrh r2, [r3, #0x2] @var8005 lsr r1, r2, #0x3 @I assume “move” is tm number, not the actual move index? ldrb r0, [r0, r1] lsl r2, r2, #0x1D lsr r2, r2, #0x1D lsr r0, r0, r2 lsl r0, r0, #0x1F lsr r0, r0, #0x1F strh r0, [r3, 0x0] @store back in var8004, or wherever bx lr .align var8004: .word 0x Donotknowoffsetoffthetopofmyhead tm_compatibility: .word 0x WhereverYouPutIt
Spoiler:
I changed that to 4 since I had expanded the TM and HM, then, this is my script:
Spoiler:
Var 8004 being the index number of Flygon
and Var 8005 being the TM index which is TM 32 Double Team, it always jumps to YES even though I unchecked it.
This signature has been disabled.
Scrollbar appears
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
I'll try to look at that, perhaps one of the addresses is incorrect.
Tried this one, but it doesn't work correctly, I modified the routine because it doesn't compile to my compiler
I changed that to 4 since I had expanded the TM and HM, then, this is my script:
Var 8004 being the index number of Flygon
and Var 8005 being the TM index which is TM 32 Double Team, it always jumps to YES even though I unchecked it.
Wait, I don't even see what you changed with my routine besides putting actual numbers in the literal pool.Tried this one, but it doesn't work correctly, I modified the routine because it doesn't compile to my compiler
Spoiler:
I changed that to 4 since I had expanded the TM and HM, then, this is my script:
Spoiler:
Var 8004 being the index number of Flygon
and Var 8005 being the TM index which is TM 32 Double Team, it always jumps to YES even though I unchecked it.
Also, you saying you "unchecked it" makes me think you were modifying compatibility with a tool. But I don't think any tools currently out even support expanding TMs. You most likely had to expand the table by hand. Did you actually change the length of the compatibility table from 8 bytes per pokemon to 16 bytes?
Male
Criscanto town-Ginoa Region xD
Seen August 13th, 2017
Posted January 1st, 2017
792
posts
9.1
Years
Wait, I don't even see what you changed with my routine besides putting actual numbers in the literal pool.
Also, you saying you "unchecked it" makes me think you were modifying compatibility with a tool. But I don't think any tools currently out even support expanding TMs. You most likely had to expand the table by hand. Did you actually change the length of the compatibility table from 8 bytes per pokemon to 16 bytes?
I made lsl r0, r0, #0x3 to lsl r0, r0, #0x4, and about the tool that supports expansion of TM, D&D Editor of Dark Zeta does that
Also, you saying you "unchecked it" makes me think you were modifying compatibility with a tool. But I don't think any tools currently out even support expanding TMs. You most likely had to expand the table by hand. Did you actually change the length of the compatibility table from 8 bytes per pokemon to 16 bytes?
This signature has been disabled.
Scrollbar appears
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
Please review and fix the issues by reading the signature rules.
You must edit it to meet the limits set by the rules before you may remove the [sig-reason] code from your signature. Removing this tag will re-enable it.
Do not remove the tag until you fix the issues in your signature. You may be infracted for removing this tag if you do not fix the specified issues. Do not use this tag for decoration purposes.
I have tried all weekend and I cant get it. If anyone has the time, Id like some help with the following:
ASM script to check and see if a Pokemon has any moves left in the Pokemon Relearner.
Things I know:
Special 0xDB pulls up a selection to select a pokemon
0x8005 stores 0 if the pokemon has no moves to learn (From Two Island Move relearner)
Not that great at finding code with breakpoints... So i need some help to intercept the above so that when I call the ASM script it will take in the party position and output if there is a move or not. (Basically special DB without thee selection screen + Waitstate)
Thanks
ASM script to check and see if a Pokemon has any moves left in the Pokemon Relearner.
Things I know:
Special 0xDB pulls up a selection to select a pokemon
0x8005 stores 0 if the pokemon has no moves to learn (From Two Island Move relearner)
Not that great at finding code with breakpoints... So i need some help to intercept the above so that when I call the ASM script it will take in the party position and output if there is a move or not. (Basically special DB without thee selection screen + Waitstate)
Thanks
I have tried all weekend and I cant get it. If anyone has the time, Id like some help with the following:
ASM script to check and see if a Pokemon has any moves left in the Pokemon Relearner.
Things I know:
Special 0xDB pulls up a selection to select a pokemon
0x8005 stores 0 if the pokemon has no moves to learn (From Two Island Move relearner)
Not that great at finding code with breakpoints... So i need some help to intercept the above so that when I call the ASM script it will take in the party position and output if there is a move or not. (Basically special DB without thee selection screen + Waitstate)
Thanks
I'm not sure why you'd want this, as without special 0xDB you'd always be searching the first pokemon in your party. On top of that, you'd probably end up storing the results back into a var anyway. If the special and 0x8005 works, why fix something that's not broken?
ASM script to check and see if a Pokemon has any moves left in the Pokemon Relearner.
Things I know:
Special 0xDB pulls up a selection to select a pokemon
0x8005 stores 0 if the pokemon has no moves to learn (From Two Island Move relearner)
Not that great at finding code with breakpoints... So i need some help to intercept the above so that when I call the ASM script it will take in the party position and output if there is a move or not. (Basically special DB without thee selection screen + Waitstate)
Thanks
Well it's not broken but its inconvenient. I have the party position of the pokemon already from previous code, but then to ask the user to select the pokemon in question again is redundant.
Maybe I did a poor job in explaining. What I am after is to mimic the above special 0xDB but skip the selection screen and instead input the variable for party position. I can do most of the work. Just need help locating where the code is located in the ROM. Then I can make a hook & catch.
Maybe I did a poor job in explaining. What I am after is to mimic the above special 0xDB but skip the selection screen and instead input the variable for party position. I can do most of the work. Just need help locating where the code is located in the ROM. Then I can make a hook & catch.